Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2016 (2016), Article ID 5164012, 8 pages
http://dx.doi.org/10.1155/2016/5164012
Research Article

A Three-Dimensional Porous Conducting Polymer Composite with Ultralow Density and Highly Sensitive Pressure Sensing Properties

1School of Material Science & Engineering, University of Science & Technology Beijing, Beijing 100083, China
2Collaborative Innovation Center for Nanomaterials & Devices, College of Physics, Qingdao University, Qingdao 266071, China
3College of Chemical Science & Engineering, Qingdao University, Qingdao 266071, China
4Industrial Research Institute of Nonwovens & Technical Textiles, Qingdao University, Qingdao 266071, China

Received 24 July 2016; Accepted 28 November 2016

Academic Editor: Stefano Bellucci

Copyright © 2016 Jin-Dong Su et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. N. Nath and A. Chilkoti, “A colorimetric gold nanoparticle sensor to interrogate biomolecular interactions in real time on a surface,” Analytical Chemistry, vol. 74, no. 3, pp. 504–509, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Mubeen, T. Zhang, B. Yoo, M. A. Deshusses, and N. V. Myung, “Palladium nanoparticles decorated single-walled carbon nanotube hydrogen sensor,” The Journal of Physical Chemistry C, vol. 111, no. 17, pp. 6321–6327, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. J. P. Cheng, B. B. Wang, M. G. Zhao, F. Liu, and X. B. Zhang, “Nickel-doped tin oxide hollow nanofibers prepared by electrospinning for acetone sensing,” Sensors and Actuators B: Chemical, vol. 190, pp. 78–85, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Y. Pang, J. P. Fu, L. Luo, F. L. Huang, and Q. F. Wei, “Fabrication of PA6/TiO2/PANI composite nanofibers by electrospinning–electrospraying for ammonia sensor,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 461, no. 1, pp. 113–118, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. S. An, S. Park, H. Ko, and C. Lee, “Fabrication of WO3 nanotube sensors and their gas sensing properties,” Ceramics International, vol. 40, no. 1, pp. 1423–1429, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. H. Li, D. Y. Ding, Q. Liu, C. Q. Ning, and X. W. Wang, “Ni-doped TiO2 nanotubes for wide-range hydrogen sensing,” Nanoscale Research Letters, vol. 9, article 118, 2014. View at Google Scholar
  7. T. Alizadeh and F. Ahmadian, “Thiourea-treated graphene aerogel as a highly selective gas sensor for sensing of trace level of ammonia,” Analytica Chimica Acta, vol. 897, pp. 87–95, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. X. H. Lou, C. L. Zhu, H. Pan et al., “Cost-effective three-dimensional graphene/Ag aerogel composite for high-performance sensing,” Electrochimica Acta, vol. 205, pp. 70–76, 2016. View at Publisher · View at Google Scholar
  9. S. S. Kistler, “Coherent expanded aerogels,” Journal of Physical Chemistry, vol. 36, no. 1, pp. 52–64, 1932. View at Google Scholar · View at Scopus
  10. M. Reim, W. Körner, J. Manara et al., “Silica aerogel granulate material for thermal insulation and daylighting,” Solar Energy, vol. 79, no. 2, pp. 131–139, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. S. T. Nguyen, J. Feng, S. K. Ng, J. P. W. Wong, V. B. C. Tan, and H. M. Duong, “Advanced thermal insulation and absorption properties of recycled cellulose aerogels,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 445, pp. 128–134, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. S. F. Chin, A. N. B. Romainor, and S. C. Pang, “Fabrication of hydrophobic and magnetic cellulose aerogel with high oil absorption capacity,” Materials Letters, vol. 115, pp. 241–243, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. Z.-Y. Wu, C. Li, H.-W. Liang et al., “Carbon nanofiber aerogels for emergent cleanup of oil spillage and chemical leakage under harsh conditions,” Scientific Reports, vol. 4, article no. 4079, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Guilminot, F. Fischer, M. Chatenet et al., “Use of cellulose-based carbon aerogels as catalyst support for PEM fuel cell electrodes: electrochemical characterization,” Journal of Power Sources, vol. 166, no. 1, pp. 104–111, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Smirnova, X. Dong, H. Hara, A. Vasiliev, and N. Sammes, “Novel carbon aerogel-supported catalysts for PEM fuel cell application,” International Journal of Hydrogen Energy, vol. 30, no. 2, pp. 149–158, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Mehling, I. Smirnova, U. Guenther, and R. H. H. Neubert, “Polysaccharide-based aerogels as drug carriers,” Journal of Non-Crystalline Solids, vol. 355, no. 50-51, pp. 2472–2479, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. B. Qiu, M. Xing, and J. Zhang, “Mesoporous TiO2 nanocrystals grown in situ on graphene aerogels for high photocatalysis and lithium-ion batteries,” Journal of the American Chemical Society, vol. 136, no. 16, pp. 5852–5855, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. L. Yin, Z. Zhang, Z. Li et al., “Spinel ZnMn2O4 nanocrystal-anchored 3D hierarchical carbon aerogel hybrids as anode materials for lithium ion batteries,” Advanced Functional Materials, vol. 24, no. 26, pp. 4176–4185, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. C.-T. Wang, C.-L. Wu, I.-C. Chen, and Y.-H. Huang, “Humidity sensors based on silica nanoparticle aerogel thin films,” Sensors and Actuators B: Chemical, vol. 107, no. 1, pp. 402–410, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. C.-T. Wang and C.-L. Wu, “Electrical sensing properties of silica aerogel thin films to humidity,” Thin Solid Films, vol. 496, no. 2, pp. 658–664, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. M. R. Ayers and A. J. Hunt, “Molecular oxygen sensors based on photoluminescent silica aerogels,” Journal of Non-Crystalline Solids, vol. 225, no. 1-3, pp. 343–347, 1998. View at Publisher · View at Google Scholar · View at Scopus
  22. R. X. Wang, G. L. Li, Y. Q. Dong, Y. W. Chi, and G. N. Chen, “Carbon quantum dot-functionalized aerogels for NO2 gas sensing,” Analytical Chemistry, vol. 85, no. 17, pp. 8065–8069, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. H.-D. Zhang, C.-C. Tang, Y.-Z. Long et al., “High-sensitivity gas sensors based on arranged polyaniline/PMMA composite fibers,” Sensors and Actuators A: Physical, vol. 219, pp. 123–127, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. G.-F. Yu, X. Yan, M. Yu et al., “Patterned, highly stretchable and conductive nanofibrous PANI/PVDF strain sensors based on electrospinning and in situ polymerization,” Nanoscale, vol. 8, no. 5, pp. 2944–2950, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Q. Zhang, Q. B. Yang, N. Q. Zhan et al., “Silver nanoparticles grown on the surface of PAN nanofiber: preparation, characterization and catalytic performance,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 362, no. 1–3, pp. 58–64, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Saeed, S. Haider, T.-J. Oh, and S.-Y. Park, “Preparation of amidoxime-modified polyacrylonitrile (PAN-oxime) nanofibers and their applications to metal ions adsorption,” Journal of Membrane Science, vol. 322, no. 2, pp. 400–405, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. P. Hu, R. Pan, S. Dong, K. Jin, and X. Zhang, “Several millimeters long SiC-SiOx nanowires synthesized by carbon black and silica sol,” Ceramics International, vol. 42, no. 2, pp. 3625–3630, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. J. H. Luo, P. Shen, W. Yao, C. F. Jiang, and J. G. Xu, “Synthesis, characterization, and microwave absorption properties of reduced graphene oxide/strontium ferrite/polyaniline nanocomposites,” Nanoscale Research Letters, vol. 11, no. 1, article 141, 2016. View at Publisher · View at Google Scholar
  29. Y. Zhao and C. Wang, “Extremely facile synthesis of manganese dioxide-polyaniline nano-reticulation with enhanced electrochemical properties,” Journal of Alloys and Compounds, vol. 677, pp. 281–287, 2016. View at Publisher · View at Google Scholar
  30. P. C. Rodrigues, M. P. Cantão, P. Janissek et al., “Polyaniline/lignin blends: FTIR, MEV and electrochemical characterization,” European Polymer Journal, vol. 38, no. 11, pp. 2213–2217, 2002. View at Publisher · View at Google Scholar · View at Scopus
  31. H. K. Shin, M. Park, H.-Y. Kim, and S.-J. Park, “Influence of orientation on ordered microstructure of PAN-based fibers during electron beam irradiation stabilization,” Journal of Industrial and Engineering Chemistry, vol. 32, pp. 120–122, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. J. H. Chen, W. N. Liu, T. Yang et al., “A facile synthesis of a three-dimensional flexible 3C-SiC sponge and its wettability,” Crystal Growth & Design, vol. 14, no. 9, pp. 4624–4630, 2014. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Yan, T. Wei, B. Shao et al., “Preparation of a graphene nanosheet/polyaniline composite with high specific capacitance,” Carbon, vol. 48, no. 2, pp. 487–493, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. C. Merlini, G. M. O. Barra, S. D. A. S. Ramoa et al., “Electrically conductive polyaniline-coated electrospun poly(vinylidene fluoride) mats,” Frontiers in Materials, vol. 2, 2015. View at Publisher · View at Google Scholar
  35. T. J. Xue, M. A. McKinney, and C. A. Wilkie, “The thermal degradation of polyacrylonitrile,” Polymer Degradation and Stability, vol. 58, no. 1-2, pp. 193–202, 1997. View at Publisher · View at Google Scholar · View at Scopus
  36. S. T. McGovern, G. M. Spinks, and G. G. Wallace, “Micro-humidity sensors based on a processable polyaniline blend,” Sensors and Actuators B: Chemical, vol. 107, no. 2, pp. 657–665, 2005. View at Publisher · View at Google Scholar · View at Scopus
  37. M. J. Winokur and B. R. Mattes, “Structural studies of halogen acid doped polyaniline and the role of water hydration,” Macromolecules, vol. 31, no. 23, pp. 8183–8191, 1998. View at Publisher · View at Google Scholar · View at Scopus
  38. K. Ogura, T. Saino, M. Nakayama, and H. Shiigi, “The humidity dependence of the electrical conductivity of a soluble polyaniline-poly(vinyl alcohol) composite film,” Journal of Materials Chemistry, vol. 7, no. 12, pp. 2363–2366, 1997. View at Publisher · View at Google Scholar · View at Scopus