Abstract

Allophylus serratus mediated silver nanoparticles biosynthesis, characterization, and antimicrobial activity were described. The synthesis of silver nanoparticles was confirmed by visual observation: UV-Vis spectrum, X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and Fourier Transform Infra-Red (FTIR). UV-Vis spectroscopy studies showed that the absorption spectra of synthesized silver nanoparticles from leaf and callus extracts had absorbance peak range of 440 nm and 445 nm, respectively. The X-RD pattern revealed the presence of crystalline, dominantly spherical silver nanoparticles in the sample having size ranging from 42 to 50 nm. The XRD peaks 38.2°, 44.1°, 64.1°, and 77.0° for leaf extract and 38.1°, 44.3°, 64.5°, 77.5°, and 81.33° for callus extract can be assigned the plane of silver crystals (111), (200), (220), and (311), respectively, and indicate that the silver nanoparticles are face-centered, cubic, and crystalline in nature. SEM and EDS analysis also confirmed the presence of silver nanoparticles. The FTIR results showed the presence of some biomolecules in extracts that act as reducing and capping agent for silver nanoparticles biosynthesis. The synthesized silver nanoparticles showed significant antibacterial activity against Klebsiella pneumoniae and Pseudomonas aeruginosa.

1. Introduction

Nanotechnology is a field of science which deals with production, manipulation, and use of nanomaterials ranging in size from 1 to 100 nanometers. Nanomaterials have novel and enhanced useful characteristics due to their size, distribution, and morphology in comparison to the larger particles of the mass material that they have been prepared from (Wildenberg 2005). Due to their enhanced or new properties, novel applications of nanomaterials and nanoparticles are growing rapidly on various fields such as electronic, magnetic, optoelectronics, and information storage (Sun et al. 2002; Yin et al. 2003). They are also broadly applied in shampoos, detergents, soaps, cosmetics, toothpastes, and medical and pharmaceutical products (Bhattacharya and Murkherjee 2008; Bhumkar et al. 2007). Nanoparticles also have been proven to have antimicrobial activity and used in the field of medicine. They are also used in cosmetics, healthcare, biomedical, drug-gene delivery, food and feed, environment, mechanics, chemical industries, optics, electronics, space industries, energy science, catalysis, single electron transistors, light emitters, nonlinear optical devices, and photo-electrochemical applications [1].

Among nanomaterials and nanoparticles used for all the above listed purposes, the metallic nanoparticles are considered as the most promising due to their remarkable antimicrobial properties. This is of great interest for researchers due to the development of resistant strains of microbes against antibiotics [2]. Compared to other heavy metal nanoparticles, silver nanoparticles are very important because of their unique properties such as good conductivity, chemical stability, catalytic and most important antibacterial, and antiviral, antifungal, and anti-inflammatory activities. They can be incorporated into composite fibers, food industry, cryogenic superconducting materials, electronic components, and cosmetic products [3, 4]. Silver nanoparticles are also applied in textile, home water purification systems, medical devices, cosmetics, electronics, and household appliances [5]. They are also being used in cancer diagnosis and treatment [6, 7].

Recently, synthesis of silver nanoparticles is attracting the attention of scientific community due to their wide range of applications. There are different chemical, physical, and biological methods of synthesizing nanoparticles. Most of the chemical and physical methods of silver nanoparticles synthesis are expensive and involve use of toxic and hazardous chemicals which are potentially harmful to the environment and responsible for various biological risks. Biological or green synthesis of nanoparticles by using biological materials such as plant extract, plant biomass, or microorganisms is environmentally friendly, is safe, and helps to reduce the consequence of chemical methods of nanoparticles synthesis [8, 9].

Some of the biological methods of silver nanoparticles synthesis involve very complex procedures. For example microbial mediated synthesis of silver nanoparticles is not industrially practical due to requirement of high aseptic and maintenance conditions [1]. Synthesis of silver nanoparticles using various plants materials and their extracts is simple way and beneficial over other biological synthesis processes which involve very complex procedures (Sastry et al. 2003) [10].

The use of plants for the synthesis of silver nanoparticles has drawn attention not only due to its nonpathogenic, environmental friendly, and economical protocol but also because of being a simple and single step rapid technique. A large number of plants and their respective portions are reported to facilitate silver nanoparticles synthesis. Plant extracts from various plants such as Alternanthera dentata [11]; Acorus calamus [12]; Boerhaavia diffusa [13]; Tea [14]; Sesuvium portulacastrum [15]; Tribulus terrestris [16]; Cocos nucifera [17]; A. indicum (Ashok et al. 2015); Ziziphora tenuior [18]; Ficus carica [19]; Cymbopogon citratus [20]; Acalypha indica [21]; Chenopodium album [22]; Cocos nucifera [17]; Pistacia atlantica [23]; Cymbopogon citratus [24], and so forth have been reported for the synthesis of silver nanoparticles.

In our present study, we investigated synthesis of silver nanoparticles from leaf and leaf derived callus extracts of Allophylus serratus, their characterization, and evaluation of antibacterial activity. This work is the first report on synthesis of silver nanoparticles using this plant which is an additional confirmation of previous reports on biological synthesis of silver nanoparticles using plant leaf and callus extracts and their antimicrobial activity.

2. Materials and Methods

2.1. Materials

Healthy fresh leaves of Allophylus serratus were collected from Andhra University campus in month of January 2016. The leaves were identified and authenticated by Dr. Bodaih Padal, taxonomist, Department of Botany, Andhra University, Visakhapatnam. All chemicals and reagents used in this study silver nitrate AgNO3 (99.98%), 6-Benzylaminopurine (BAP), 1-Naphthaleneacetic acid (NAA) ethanol (C2H6O), sodium hypochlorite (NaClO), mercuric chloride (HgCl2), Murashige and Skoog media (MS media), Luria Bertani broth (LB broth), and Luria Bertani agar (LB agar) were analytical grade (AR) and purchased from HiMedia, India. Double distilled water was used throughout the experiment. The bacterial strains, namely, Bacillus subtilis, Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa, were obtained from Department of Microbiology, Andhra University, Visakhapatnam, India. All solutions were freshly prepared using double distilled water and kept in the dark to avoid any photochemical reactions. All glassware used in experimental procedures was washed thoroughly with double distilled water and dried using hot air oven before use.

2.2. Callus Induction and Proliferation

Callus induction of Allophylus serratus was achieved from leaf explants on MS media [25]. The PH of the media was adjusted to 5.8 and then autoclaved at 121°C for 15 min under 103.42 KPa pressure. In laminar hood, plant growth regulators BAP (3 g/L) NAA (0.5 g/L) were added by filter sterilization. The leaf explants were surface sterilized by using 70% ethanol for 1 minute, 2% sodium hypochlorite for 3-4 minutes, and 0.1% mercuric chloride solution for 3 minutes. Finally the leaf explants were washed thoroughly with sterile double distilled water and inoculated in the MS medium. The cultures were kept in dark at 25°C. The induction of the callus was found within 2 weeks. The callus was subcultured every 21 days several times and finally a mass of calli was harvested after 40 days.

2.3. Preparation of Leaf and Leaf Derived Callus Extract

Leaves of Allophylus serratus were washed, shade dried for one week, and ground to powder. Callus induced from leaves on MS medium supplemented with 3 mg/L BAP and 0.5 mg/L NAA was grown for 40 days and collected and dried in oven at 40°C. Then the calli were ground to powder using mortar and pestle. These powders of leaves and callus were used for the synthesis of silver nanoparticles (Figure 1).

Twenty grams of leaf and callus powder was put in 500 mL conical flask containing 100 mL double distilled water separately. The mixtures were boiled for 15 minutes. After cooled to room temperature, the mixtures were filtered with Whatman number 1 filter paper. The filtrates were stored in refrigerator (4°C) and used for the synthesis of silver nanoparticles (Figure 1).

2.4. Preparation of Silver Nitrate Solution

Commercially purchased silver nitrate (molecular weight 169.87) was used to prepare 1 mM concentration of silver nitrate solution. A stock solution of 1 mM, 3 mM, and 5 mM of AgNO3 was prepared by dissolving appropriate amount of silver nitrate in double distilled water.

2.5. Synthesis of Silver Nanoparticles

For the synthesis of silver nanoparticles, 10 mL of leaf extract and callus extract was mixed with 100 mL of aqueous AgNO3 solution separately. The synthesis process involves mixing the aqueous extracts with an aqueous solution of AgNO3 at room temperature. The mixtures were heated at 60°C and incubated in a dark at room temperature for 24 h. The color change of the mixture was recorded.

2.6. Characterization of Synthesized Silver Nanoparticles
2.6.1. Visual Observation of Color Change

The synthesis of silver nanoparticles (the reduction process Ag+ to Ag0 nanoparticles) was confirmed by visual observation of color change of the solution from yellow green (leaf extract) and white yellow (callus extract) to reddish brown and dark brown upon heating and incubation.

2.6.2. UV-Vis Spectroscopy

UV-Vis spectral analysis of synthesized silver nanoparticles was measured by using UV-visible spectrophotometer (UV-2450, Shimadzu, Japan) with a resolution of 1 nm to investigate the reduction of Ag+ to Ag0 by callus and leaf extracts. The spectra were taken between 200 and 800 nm after 24 Hrs incubation of the mixtures of AgNO3 solution and callus and leaf extracts. Double distilled water was used as blank reference for background correction of experiments.

2.6.3. XRD Analysis

The synthesized silver nanoparticles were centrifuged at 10,000 rpm for 15 minutes and the pellets were redispersed in sterile double distilled and centrifuged at 10,000 rpm for 10 minutes. The purified pellets were dried at 50°C in an oven and analyzed by X-ray Diffraction Unit (XRD) (Pan Analytical, X-pert pro, Netherland). The X-ray diffraction (XRD) measurement of silver nanoparticles synthesized by leaf and callus extracts was carried out using Cu-Kα radiation source in scattering range of 20–80 on the instrument operating at a voltage of 45 kV and a current of 40 mA. The presence, crystalline nature, phase variety, and grain size of synthesized silver nanoparticles were determined by X-ray diffraction spectroscopy. The particle size of the prepared samples was determined by using Scherrer’s equation as follows: where is average crystallite size and is line broadening in radians (full width at half maximum of the peak in radians). is wavelength of X-ray and is braggs angle. is constant (geometric factor = 0.94).

2.6.4. Scanning Electron Microscope (SEM) and Energy Dispersive Spectroscopy (EDS)

Scanning electron microscopy study was done using electron microscope (JSM-6610 LV, Jeol Asia PTE Ltd, Japan). The synthesized silver nanoparticles were centrifuged at 10,000 rpm for 15 min and the pellets were redispersed in sterile double distilled water and centrifuged at 10,000 rpm for 10 minutes. The purified pellets were dried at 50°C in an oven and thin films of dried samples were prepared on a carbon coated copper grid by dropping a very small amount of the samples on the grid. Extra solutions of the samples were removed using a blotting paper. The films on the carbon coated copper grid (SEM grid) were allowed to dry by putting them under a mercury lamp for 5 min. The morphological features, micrograph images, size, and structure of synthesized nanoparticles from callus and leaf extracts were analyzed and recorded. The details regarding applied voltage, magnification used, and size of the contents of the images were implanted on the images itself. The EDS analysis was carried out by using Energy Dispersive Spectrum (INCA energy 250, Oxford, Japan).

2.6.5. FTIR Analysis

FTIR spectrometer (IR Prestige21, Shimadzu, Pvt Ltd, Japan) was used to study the chemical composition of the synthesized silver nanoparticles. The solutions containing silver nanoparticles were centrifuged at 10,000 rpm for 15 min. The supernatants were discarded and the pellets were redispersed in sterile double distilled water and centrifuged at 10,000 rpm for 10 minutes. The purified pellets were dried at 60°C and the dried powders were subjected to FTIR spectroscopy measurement in the range 4000–400 cm−1 using KBr pellet method.

2.6.6. Antibacterial Assay

Antibacterial activities of synthesized silver nanoparticles were analyzed by well diffusion method against Gram’s positive bacteria (Bacillus subtilis and Staphylococcus aureus) and Gram’s negative bacteria (Klebsiella pneumoniae and Pseudomonas aeruginosa). The strains bacteria were subcultured using LB broth (Luria Bertani broth) (HiMedia) and were incubated at 37°C for 24 h. Fresh overnight bacterial cultures were taken and spread on the LB agar (Luria Bertani agar) plates using glass rod to cultivate bacteria. Six millimeter diameter wells were made on LB agar (Luria Bertani agar) plate with the help of gel puncture. Twenty-five microlitters of silver nanoparticles, plant extract, and double distilled water (as control) were inoculated to the well, and then the plates were incubated in incubator at 37°C for 24 h. The antibacterial activity was measured based on the inhibition zone around the wells.

3. Results and Discussion

3.1. Synthesis of Silver Nanoparticles

When leaf and callus extracts were mixed and incubated with AgNO3 solution, color change from light yellow to dark brown or reddish brown was visually observed (Figure 2). When the mixtures were heated at 60°C for 10 minutes, the color changes were more rapid than at room temperature. After heating, the mixtures were incubated at room temperature for 24 h for completion of the reduction process. This color change is due to the Surface Plasmon Resonance phenomenon in silver nanoparticles [21, 26] as a result of the excitation of free electrons in nanoparticles [27]. Similar results have also been reported in earlier studies [2832] and hence confirmed the completion of reaction between extracts and AgNO3. No further color changes were observed after 24 h which indicated the completion of the reduction process. This is in line with literature reports [33] which indicated synthesis of silver nanoparticles at 24 h by using Lippia citriodora leaf extract. The color intensity was higher with leaf extract than callus extract (Figure 2). Control experiments without the addition of extracts showed no formation of brown color, indicating that the color change is due to the presence of extracts.

3.2. UV-Vis Spectroscopy

The formation of silver nanoparticles using leaf and leaf derived callus extracts was confirmed by measuring the UV-visible spectrum of the reaction mixture at wavelengths ranging from 200 to 800 nm. The UV-visible absorption spectra of silver nanoparticles synthesized by using 1 mM AgNO3 with leaf and leaf derived callus extracts revealed a Surface Plasmon Resonance band at 440 nm and 445 nm in the spectrum, respectively, which clearly indicated the presence of spherical silver nanoparticles (Figure 3). Broadening of the peaks (Figure 3) at the base indicated that the nanoparticles are poly dispersed [34]. The difference in the intensity and the band position of leaf and callus extracts synthesized silver nanoparticles is due to leaf extracts yielding smaller and stable nanoparticles more than the callus extract.

3.3. XRD Analysis

Analysis of structure and crystalline size of the synthesized silver nanoparticles were carried out by XRD. The XRD analysis of synthesized silver nanoparticles from leaf extract and callus extract showed diffraction peaks at = 32.5°, 38.3°, 44.4°, 64.6°, and 76.8° and 32.4°, 38.3°, 44.5°, 64.5°, and 76.7°, respectively. When compared with the standard, the obtained XRD spectrum confirmed that the synthesized silver nanoparticles were in nanocrystal form and crystalline in nature. The peaks can be assigned to the planes (122), (111), (200), (220), and (311) facet of silver crystal, respectively. The high peaks in the XRD analysis indicated the active silver composition with the indexing (Figure 4). The same result was reported by Roy et al. [35] and indicates that the silver nanoparticles are face-centered, cubic, and crystalline in nature (Shameli et al. 2010) (correlated to JCPDS card: number 04-0783). The Full Width at Half Maximum (FWHM) values were used to calculate the size of the nanoparticles. The average size of silver nanoparticles synthesized from leaf and callus extracts was calculated using Scherrer’s equation where Scherrer’s constant value = 0.94 was selected due to the cubic and crystalline nature of the nanoparticles (Scherrer [36]). The average sizes of the synthesized nanoparticles from leaf and callus extracts were found to be 42 nm and 44 nm, respectively.

The broadening of Bragg’s peaks around their bases indicates the formation of small sized silver nanoparticles [3739]. A few unassigned peaks observed could be due to the presence of some bioorganic compounds/protein(s) in the leaf and callus extracts and crystallizes on the surface of the silver (Ahmad and Sharma et al. 2012). Similar results in silver nanoparticles synthesized using Mangifera indica leaf extract [40], geranium leaves [41], mushroom extract [42], and Coleus aromaticus leaf extract (Vanaja and Annadurai 2012) were reported.

3.4. Scanning Electron Microscope (SEM) and EDS Analysis

The surface morphology, size and shape of the silver nanoparticles were analyzed by Scanning Electron Microscope. Figure 5 shows the SEM image of silver nanoparticles synthesized from leaf and leaf derived callus extracts. The SEM images show individual silver nanoparticles which are predominantly spherical in shape as well as number of aggregates with no defined morphology. The presences of biomolecules in the leaf and callus extracts has resulted in the synthesis of spherical silver nanoparticles and the aggregation may be due to the presence of secondary metabolites in the leaf extracts. The SEM image shows the size of the silver nanoparticles ranging from 40 to 50 nm. Similar result of the silver nanoparticles size was reported by using Aloe vera extract (Chandran et al. 2006) and by using Euphorbia hirta leaves (Elumalai et al. 2010).

An X-ray energy dispersive spectroscopy (EDS) study was carried out to confirm the formation of silver nanoparticles. EDS peaks corresponding to element silver show the presence of silver as the ingredient element and the formation and purity of silver nanoparticles synthesized from leaf extract and callus extracts (Figure 6). The sharp peak in the silver region was observed at 3 keV confirming the presence of silver nanoparticles due to the Surface Plasmon Resonance [43]. Generally silver nanocrystals demonstrate typical optical absorption peak approximately at 3 keV due to Surface Plasmon Resonance [4446]. The EDS elemental analysis of the synthesized silver nanoparticles showed highest proportion of silver followed by C and O. The weak oxygen signal may be due to X-ray emission from carbohydrates/proteins/enzymes present within the extracts [39] or possibility of silver oxide nanoparticles formation after synthesis of silver nanoparticles, which reacts with water in the solution since the nanoparticles are highly reactive due to their high surface to volume ratio [47]. Apart from this, X-ray diffraction (Figure 4) shows two peaks at 27.97 and 32.29, which correspond to (110) and (111) planes of silver oxide Ag2O. These peaks correspond to silver oxide standard (JCPDS 76-1393) [48, 49] which confirms the formation of Ag2O nanoparticles. The carbon peak may be due to the biomolecules that are bound to the surface of the silver nanoparticles [50].

3.5. FTIR Analysis

FTIR analyses were carried out to identify the potential functional groups of the biomolecules in the Allophylus serratus leaf and leaf derived callus extracts that are involved in the capping, reduction of the silver ions to synthesize silver nanoparticles, and stabilization of the synthesized silver nanoparticles. The FTIR spectrum of the leaf extract mediated synthesized silver nanoparticles is shown in Figure 7 and that of callus extract mediated synthesized silver nanoparticles is given in Figure 8, respectively. The FTIR spectra of obtained nanoparticles show different absorption bands ranging from 3550 to 532 cm−1, which indicate the presence of some active functional groups.

The absorption spectrum of leaf extract synthesized silver nanoparticles (Figure 7) shows peaks at 3267 cm−1, 2887 cm−1, 2400 cm−1, 2065 cm−1, 1590 cm−1, 1406 cm−1, 1229 cm−1, 1009 cm−1, 894 cm−1 and 532 cm−1. That of callus extract synthesized silver nanoparticles (Figure 8) shows peaks, 3550 cm−1, 3249 cm−1, 2895 cm−1, 2680 cm−1, 2280 cm−1, 1609 cm−1, 1383 cm−1, 1248 cm−1, 1074 cm−1, and 895 cm−1.

The absorption bands at 3550 cm−1, 3267 cm−1, and 3249 cm−1 in the FTIR spectra were due to O–H stretching vibration of alcohol and phenol. The peaks at 2895 cm−1 and 2887 cm−1 were due to the presence of C–H symmetrical stretching of hydrocarbons such as alkanes and aldehydes [51]. The band at 1609 cm−1 corresponds to C–N and C–C stretching indicating the presence of proteins [52]. The band at 1406 cm−1 was due to the presence of N–H stretch vibration which showed the presence of the amide linkages of the proteins. As reported in many studies these functional groups have role in capping/stability of silver nanoparticles [52]. The bands at 1074 cm−1 and 1383 cm−1 correspond to C–N (amines) stretch vibration of the proteins and N=O symmetry stretching of the nitro compound, respectively. According to [53, 54], the carbonyl groups of the amino acid residues and the peptides, free amine, or cysteine groups in proteins have the ability to bind to the silver. The band at 532 cm−1 indicates C–Br stretching of alkyl halides and that at 1248 cm−1 and 1229 cm−1 were assigned to C–N stretching of amines.

Therefore, from the results of FTIR analyses of extracts mediated synthesized silver nanoparticles it can be concluded that some of the biological molecules of leaf and callus extracts such as alkaloids, phenols, flavonoids, amino acids, glycosides, and tannins are responsible for biotransformation of silver ions to silver nanoparticles and its stabilization in aqueous medium.

3.6. Antibacterial Activity

Silver nanoparticles have been widely used in health, medicine, and environmental applications [55]. In this study, Allophylus serratus leaf and leaf derived callus extracts mediated synthesized silver nanoparticles were examined for possible antibacterial activity. The synthesized silver nanoparticles were tested for antibacterial activity against both Gram’s positive (Bacillus subtilis and Staphylococcus aureus) and Gram’s negative (Klebsiella pneumoniae and Pseudomonas aeruginosa) bacteria. Table 1 and Figure 9 show the results of antibacterial activities of synthesized silver nanoparticles evaluated from the well diffusion method.

The synthesized silver nanoparticles tested for antibacterial activity showed inhibition zones against the studied bacteria (Figure 9). Maximum zone of inhibition 14 mm was produced against Klebsiella pneumoniae and Pseudomonas aeruginosa, respectively. The least zone of inhibition was observed in Staphylococcus aureus species (Figure 1 and Table 1). The silver nanoparticles showed antibacterial activity due to their large surface area that provides better contact with cell wall of bacteria [56]. Several similar results were obtained in previous studies. Inhibition against E. coli and Staphylococcus was observed in the case of silver nanoparticles synthesized using extract from Mentha piperita [57]. Acalypha indica and Solanum torvum extracts based synthesized silver nanoparticles showed high toxicity to E. coli [21] and Pseudomonas and Staphylococcus [58], respectively.

The mechanism by which silver nanoparticles show antibacterial activity is mainly due the positive charge on the Ag+ ion. This is derived through the electrostatic attraction between positive charge of silver nanoparticles and negative charges on the cell membrane of microorganism [5962]. The antibacterial activity of silver nanoparticles against Gram’s negative bacteria is higher than that against Gram’s positive bacteria. This may be due to the variation in the cell wall composition between Gram positive and negative bacteria.

The silver nanoparticles of leaf and leaf derived callus extracts of Allophylus serratus show highest antibacterial activity against Klebsiella pneumoniae followed by Pseudomonas aeruginosa and Staphylococcus aureus species.

4. Conclusion

Medicinal plants have medicinally important compounds in their different parts. The synthesis of nanoparticles using plants depends on the nature of plant such as its phytochemical content, special adaptation, and medicinal importance. In this study, we investigated eco-friendly and cost-effective green synthesis of silver nanoparticles using leaf and leaf derived callus extract of medicinal plant A. serratus. Water soluble organic compounds present in the leaf and callus extracts were mainly responsible for synthesis of silver nanoparticles by reducing silver ions to nanosized silver particles. The UV-visible spectroscopy, XRD, SEM, EDS, and FTIR studies of the synthesized silver nanoparticles elucidated that the silver nanoparticles were crystalline in nature, spherical in shape with size ranging between 42 and 50 nm, and stable. The synthesized silver nanoparticles exhibited antibacterial activity against Staphylococcus aureus, Bacillus subtilis, and Klebsiella pneumoniae and Pseudomonas aeruginosa strains. This green inexpensive and simple method can be used as alternative to chemical, physical, and microbial mediated methods used for production of silver nanoparticles.

Competing Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.