Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanomaterials
Volume 2017, Article ID 6273095, 14 pages
https://doi.org/10.1155/2017/6273095
Research Article

Effects of Milling pH and Hydrothermal Treatment on Formation of Nanostructured Boehmite Binder for Alumina Extrusion

1Center for Engineering, Modeling and Applied Social Sciences, Federal University of ABC, Av. dos Estados 5001, 09210-580 Santo André, SP, Brazil
2Centro Universitário da FEI, Department of Materials Engineering, Av. Humberto Alencar Castelo Branco 3972, 09850-901 São Bernardo do Campo, SP, Brazil

Correspondence should be addressed to Humberto Naoyuki Yoshimura; rb.ude.cbafu@arumihsoy.otrebmuh

Received 27 March 2017; Accepted 31 May 2017; Published 5 July 2017

Academic Editor: Victor M. Castaño

Copyright © 2017 Maurício Batista de Lima et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. M. Deif, “A system model for green manufacturing,” Advances in Production Engineering & Management, vol. 6, pp. 27–36, 2011. View at Google Scholar
  2. C. Duran, K. Sato, Y. Hotta, T. Nagaoka, and K. Watari, “Eco-friendly processing and methods for ceramic materials—a review,” Journal of the Ceramic Society of Japan, vol. 116, pp. 1175–1181, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. A. L. Molisani and H. N. Yoshimura, “Low-temperature synthesis of AlN powder with multicomponent additive systems by carbothermal reduction-nitridation method,” Materials Research Bulletin, vol. 45, no. 6, pp. 733–738, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. J. S. Reed, Principles of Ceramics Processing, Wiley-Interscience, New York, NY, USA, 2nd edition, 1995.
  5. T. Nagaoka, T. Tsugoshi, Y. Hotta, M. Yasuoka, and K. Watari, “Forming and sintering of porous calcium-hexaaluminate ceramics with hydraulic alumina,” Journal of Materials Science, vol. 41, no. 22, pp. 7401–7405, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Ananthakumar and K. G. K. Warrier, “Extrusion characteristics of alumina-aluminium titanate composite using boehmite as a reactive binder,” Journal of the European Ceramic Society, vol. 21, no. 1, pp. 71–78, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Ananthakumar, A. R. R. Menon, K. Prabhakaran, and K. G. K. Warrier, “Rheology and packing characteristics of alumina extrusion using boehmite gel as a binder,” Ceramics International, vol. 27, no. 2, pp. 231–237, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Y. Chen and J. D. Cawley, “Extrusion of α‐Al2O3–boehmite mixtures,” Journal of the American Ceramic Society, vol. 75, no. 3, pp. 575–579, 1992. View at Publisher · View at Google Scholar · View at Scopus
  9. B. Kindl, D. J. Carlsson, Y. Deslandes, and J. M. A. Hoddenbagh, “Preparation of α-alumina ceramics: the use of boehmite sols as dispersing agents,” Ceramics International, vol. 17, no. 6, pp. 347–350, 1991. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Kwon and G. L. Messing, “Constrained densification in boehmite-alumina mixtures for the fabrication of porous alumina ceramics,” Journal of Materials Science, vol. 33, no. 4, pp. 913–921, 1998. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Ananthakumar, V. Raja, and K. G. K. Warrier, “Effect of nanoparticulate boehmite sol as a dispersant for slurry compaction of alumina ceramics,” Materials Letters, vol. 43, no. 4, pp. 174–179, 2000. View at Publisher · View at Google Scholar · View at Scopus
  12. P. Baláž, M. Achimovičová, M. Baláž et al., “Hallmarks of mechanochemistry: from nanoparticles to technology,” Chemical Society Reviews, vol. 42, no. 18, pp. 7571–7637, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. J. L. Do and T. Friščić, “Mechanochemistry: a force of synthesis,” ACS Central Science, vol. 3, no. 1, pp. 13–19, 2017. View at Publisher · View at Google Scholar
  14. J. Huot, D. B. Ravnsbæk, J. Zhang, F. Cuevas, M. Latroche, and T. R. Jensen, “Mechanochemical synthesis of hydrogen storage materials,” Progress in Materials Science, vol. 58, no. 1, pp. 30–75, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. S. F. Santos, J. F. R. De Castro, T. T. Ishikawa, and E. A. Ticianelli, “Effect of mechanical coating with Ni and Ni-5% Al on the structure and electrochemical properties of the Mg-50% Ni alloy,” Journal of Materials Science, vol. 43, no. 8, pp. 2889–2894, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. S. F. Santos, T. T. Ishikawa, W. J. Botta, and J. Huot, “MgH2 + FeNb nanocomposites for hydrogen storage,” Materials Chemistry and Physics, vol. 147, no. 3, pp. 557–562, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Šepelák, A. Düvel, M. Wilkening, K.-D. Becker, and P. Heitjans, “Mechanochemical reactions and syntheses of oxides,” Chemical Society Reviews, vol. 42, no. 18, pp. 7507–7520, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Hotta, T. Shirai, K. Sato, H. Yilmaz, and K. Watari, “Hydrodynamic interaction of particles in Al2O3 slurries prepared by different milling methods,” Journal of the American Ceramic Society, vol. 92, no. 6, pp. 1198–1202, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Stenger, S. Mende, J. Schwedes, and W. Peukert, “The influence of suspension properties on the grinding behavior of alumina particles in the submicron size range in stirred media mills,” Powder Technology, vol. 156, no. 2-3, pp. 103–110, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. H. N. Yoshimura and M. B. Lima, “Ecofriendly alumina processing with in situ formed nanostructured boehmite binder,” Materials Letters, vol. 137, pp. 293–296, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Nagaoka, K. Sato, Y. Hotta, T. Tsugoshi, and K. Watari, “Extrusion of alumina ceramics with hydraulic alumina without organic additives,” Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, vol. 115, no. 1339, pp. 191–194, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. D. H. Lee and R. A. Condrate Sr., “An FTIR spectral investigation of the structural species found on alumina surfaces,” Materials Letters, vol. 23, no. 4-6, pp. 241–246, 1995. View at Publisher · View at Google Scholar · View at Scopus
  23. R. L. Frost, J. T. Kloprogge, S. C. Russell, and J. L. Szetu, “Vibrational spectroscopy and dehydroxylation of aluminum (oxo)hydroxides: gibbsite,” Applied Spectroscopy, vol. 53, no. 4, pp. 423–434, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. P. Raharjo, C. Ishizaki, and K. Ishizaki, “Surface hydration states of high purity α-Al2O3 powders,” Journal of the Ceramic Society of Japan, vol. 108, no. 5, pp. 449–455, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. N. Koga, T. Fukagawa, and H. Tanaka, “Preparation and thermal decomposition of synthetic bayerite,” Journal of Thermal Analysis and Calorimetry, vol. 64, no. 3, pp. 965–972, 2001. View at Publisher · View at Google Scholar · View at Scopus
  26. L. P. Cook, “Phase equilibria of alumina,” in Alumina chemicals: science and technology handbook, L. D. Hart, Ed., pp. 49–71, The American Ceramic Society, Columbus, Ohio, USA, 1990. View at Google Scholar
  27. K. Wefers, “Nomenclature, preparation, and properties of aluminum oxides, oxide hydroxides, and trihydroxides,” in Alumina chemicals: science and technology handbook, The American Ceramic Society, L. D. Hart, Ed., pp. 13–22, The American Ceramic Society, Columbus, Ohio, USA, 1990. View at Google Scholar
  28. X. Carrier, E. Marceau, J.-F. Lambert, and M. Che, “Transformations of γ-alumina in aqueous suspensions. 1. Alumina chemical weathering studied as a function of pH,” Journal of Colloid and Interface Science, vol. 308, no. 2, pp. 429–437, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. E. Laiti, P. Persson, and L. O. Ohman, “Balance between surface complexation and surface phase transformation at the alumina/water interface,” Langmuir, vol. 14, no. 4, pp. 825–831, 1998. View at Publisher · View at Google Scholar
  30. T. Tsuchida and N. Ichikawa, “Mechanochemical phenomena of gibbsite, bayerite and boehmite by grinding,” Reactivity of Solids, vol. 7, no. 3, pp. 207–217, 1989. View at Publisher · View at Google Scholar · View at Scopus
  31. S. D. Vaidya and N. V. Thakkar, “Study of phase transformations during hydration of rho alumina by combined loss on ignition and x-ray diffraction technique,” Journal of Physics and Chemistry of Solids, vol. 62, no. 5, pp. 977–986, 2001. View at Publisher · View at Google Scholar · View at Scopus
  32. X. Du, Y. Wang, X. Su, and J. Li, “Influences of pH value on the microstructure and phase transformation of aluminum hydroxide,” Powder Technology, vol. 192, no. 1, pp. 40–46, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. Y. Hotta, H. Yilmaz, T. Shirai, K. Ohota, K. Sato, and K. Watari, “State of the dispersant and particle surface during wet-jet milling for preparation of a stable slurry,” Journal of the American Ceramic Society, vol. 91, no. 4, pp. 1095–1101, 2008. View at Publisher · View at Google Scholar · View at Scopus
  34. Y. Hotta, K. Tsunekawa, T. Shirai, K. Sato, M. Yasuoka, and K. Watari, “Fabrication of stable Al2O3 slurries and dense green bodies using soft-energy milling process,” Journal of the European Ceramic Society, vol. 29, no. 5, pp. 869–874, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. K. Sato, Y. Hotta, H. Yilmaz, K. Sato, and K. Watari, “Fluidity of methyl cellulose-contained suspensions and pastes prepared from differently milled Al2O3 powder,” Journal of Colloid and Interface Science, vol. 331, no. 1, pp. 221–226, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. G. V. Franks and Y. Gan, “Charging behavior at the alumina-water interface and implications for ceramic processing,” Journal of the American Ceramic Society, vol. 90, no. 11, pp. 3373–3388, 2007. View at Publisher · View at Google Scholar · View at Scopus
  37. J. D. Russell, V. C. Farmer, and D. G. Lewis, “Lattice vibrations of boehmite (γ-AlOOH): Evidence for a C122v rather than a D172h space group,” Spectrochimica Acta Part A: Molecular Spectroscopy, vol. 34, no. 12, pp. 1151–1153, 1978. View at Publisher · View at Google Scholar · View at Scopus
  38. A. B. Kiss, G. Keresztury, and L. Farkas, “Raman and Ir-spectra and structure of boehmite (γ-AlOOH)—evidence for the recently discarded D172h space group,” Spectrochimica Acta, vol. 36, no. 7, pp. 653–658, 1980. View at Publisher · View at Google Scholar
  39. R. Tettenhorst and D. A. Hofmann, “Crystal chemistry of boehmite,” Clays and Clay Minerals, vol. 28, no. 5, pp. 373–380, 1980. View at Publisher · View at Google Scholar · View at Scopus
  40. G. K. Priya, P. Padmaja, K. G. K. Warrier, A. D. Damodaran, and G. J. Aruldhas, “Dehydroxylation and high temperature phase formation in sol-gel boehmite characterized by Fourier transform infrared spectroscopy,” Journal of Materials Science Letters, vol. 16, no. 19, pp. 1584–1587, 1997. View at Publisher · View at Google Scholar · View at Scopus
  41. J. Q. Wang, J. L. Liu, X. Y. Liu, M. H. Qiao, Y. Pei, and K. N. Fan, “Hydrothermal transformation of bayerite to boehmite,” Science of Advanced Materials, vol. 1, no. 1, pp. 77–85, 2009. View at Publisher · View at Google Scholar · View at Scopus
  42. S. Musić, D. Dragčević, S. Popović, and N. Vdović, “Microstructural properties of boehmite formed under hydrothermal conditions,” Materials Science and Engineering B, vol. 52, no. 2-3, pp. 145–153, 1998. View at Publisher · View at Google Scholar · View at Scopus
  43. D. Mishra, S. Anand, R. K. Panda, and R. P. Das, “Hydrothermal preparation and characterization of boehmites,” Materials Letters, vol. 42, no. 1, pp. 38–45, 2000. View at Publisher · View at Google Scholar · View at Scopus
  44. D. A. Porter and K. E. Easterling, Phase Transformations in Metals and Alloys, Chapman & Hall, London, UK, 2nd edition, 1992.
  45. C. Suryanarayana, “Mechanical alloying and milling,” Progress in Materials Science, vol. 46, no. 1-2, pp. 1–184, 2001. View at Publisher · View at Google Scholar · View at Scopus
  46. X. Bokhimi, J. Sànchez-Valente, and F. Pedraza, “Crystallization of sol-gel boehmite via hydrothermal annealing,” Journal of Solid State Chemistry, vol. 166, no. 1, pp. 182–190, 2002. View at Publisher · View at Google Scholar · View at Scopus
  47. Y. Liu, D. Ma, X. Han et al., “Hydrothermal synthesis of microscale boehmite and gamma nanoleaves alumina,” Materials Letters, vol. 62, no. 8-9, pp. 1297–1301, 2008. View at Publisher · View at Google Scholar · View at Scopus
  48. P. de Souza Santos, A. C. V. Coelho, H. de Souza Santos, and P. K. Kiyohara, “Hydrothermal synthesis of well-crystallised boehmite crystals of various shapes,” Materials Research, vol. 12, no. 4, pp. 437–445, 2009. View at Publisher · View at Google Scholar · View at Scopus
  49. Y. Deng, Q. Yang, G. Lu, and W. Hu, “Synthesis of γ-Al2O3 nanowires through a boehmite precursor route,” Ceramics International, vol. 36, no. 6, pp. 1773–1777, 2010. View at Publisher · View at Google Scholar · View at Scopus
  50. G. Rani and P. D. Sahare, “Effect of temperature on structural and optical properties of boehmite nanostructure,” International Journal of Applied Ceramic Technology, vol. 12, no. 1, pp. 124–132, 2015. View at Publisher · View at Google Scholar · View at Scopus
  51. N. Koga, “A comparative study of the effects of decomposition rate control and mechanical grinding on the thermal decomposition of aluminum hydroxide,” Journal of Thermal Analysis and Calorimetry, vol. 81, no. 3, pp. 595–601, 2005. View at Publisher · View at Google Scholar · View at Scopus
  52. K. J. D. MacKenzie, J. Temuujin, and K. Okada, “Thermal decomposition of mechanically activated gibbsite,” Thermochimica Acta, vol. 327, no. 1-2, pp. 103–108, 1999. View at Publisher · View at Google Scholar · View at Scopus
  53. G. Li, J. Smith, H. Inomata, and K. Arai, “Synthesis and thermal decomposition of nitrate-free boehmite nanocrystals by supercritical hydrothermal conditions,” Materials Letters, vol. 53, no. 3, pp. 175–179, 2002. View at Publisher · View at Google Scholar · View at Scopus
  54. J. J. Benbow, E. W. Oxley, and J. Bridgwater, “The extrusion mechanics of pastes-the influence of paste formulation on extrusion parameters,” Chemical Engineering Science, vol. 42, no. 9, pp. 2151–2162, 1987. View at Publisher · View at Google Scholar · View at Scopus
  55. A. B. Yu, J. Bridgwater, A. S. Burbidge, and Z. Saracevic, “Liquid maldistribution in particulate paste extrusion,” Powder Technology, vol. 103, no. 2, pp. 103–109, 1999. View at Publisher · View at Google Scholar · View at Scopus
  56. J. Davies and J. G. P. Binner, “Plastic forming of alumina from coagulated suspensions,” Journal of the European Ceramic Society, vol. 20, no. 10, pp. 1569–1577, 2000. View at Publisher · View at Google Scholar · View at Scopus
  57. L. Hongjun and M. C. Leu, “Liquid phase migration in extrusion of aqueous alumina paste for freeze-form extrusion fabrication,” International Journal of Modern Physics B, vol. 23, no. 6-7, pp. 1861–1866, 2009. View at Publisher · View at Google Scholar · View at Scopus
  58. M. J. Patel, J. Wedderburn, S. Blackburn, and D. I. Wilson, “Maldistribution of fluids in extrudates,” Journal of the European Ceramic Society, vol. 29, no. 5, pp. 937–941, 2009. View at Publisher · View at Google Scholar · View at Scopus
  59. K. A. Wickersheim and G. K. Korpi, “Interpretation of the infrared spectrum of boehmite,” The Journal of Chemical Physics, vol. 42, no. 2, pp. 579–583, 1965. View at Publisher · View at Google Scholar · View at Scopus
  60. S. Ananthakumar, P. Manohar, and K. G. K. Warrier, “Effect of boehmite and organic binders on extrusion of alumina,” Ceramics International, vol. 30, no. 6, pp. 837–842, 2004. View at Publisher · View at Google Scholar · View at Scopus
  61. H. N. Yoshimura, A. L. Molisani, N. E. Narita, P. F. Cesar, and H. Goldenstein, “Porosity dependence of elastic constants in aluminum nitride ceramics,” Materials Research, vol. 10, no. 2, pp. 127–133, 2007. View at Publisher · View at Google Scholar · View at Scopus