Boron-Doped Carbon Nano-/Microballs from Orthoboric Acid-Starch: Preparation, Characterization, and Lithium Ion Storage Properties

Lu, Xinhua; Chen, Lin

doi:https://doi.org/10.1155/2018/4987340

Journal of Nanomaterials

On this page

Abstract Introduction Results and Discussion Conclusions Conflicts of Interest References Copyright Related Articles

Research Article | Open Access

Volume 2018 | Article ID 4987340 | https://doi.org/10.1155/2018/4987340

Boron-Doped Carbon Nano-/Microballs from Orthoboric Acid-Starch: Preparation, Characterization, and Lithium Ion Storage Properties

Xinhua Lu¹and Lin Chen¹

Academic Editor: Zafar Iqbal

Received13 Oct 2017

Accepted25 Feb 2018

Published23 Apr 2018

Abstract

A boron-doped carbon nano-/microballs (BC) was successfully obtained via a two-step procedure including hydrothermal reaction (180°C) and carbonization (800°C) with cheap starch and H₃BO₃ as the carbon and boron source. As a new kind of boron-doped carbon, BC contained 2.03 at% B-content and presented the morphology as almost perfect nano-/microballs with different sizes ranging from 500 nm to 5 μm. Besides that, due to the electron deficient boron, BC was explored as anode material and presented good lithium storage performance. At a current density of 0.2 C, the first reversible specific discharge capacity of BC electrode reached as high as 964.2 mAh g^–1 and kept at 699 mAh g^–1 till the 11th cycle. BC also exhibited good cycle ability with a specific capacity of 356 mAh g^–1 after 79 cycles at a current density of 0.5 C. This work proved to be an effective approach for boron-doped carbon nanostructures which has potential usage for lithium storage material.

1. Introduction

To date, several approaches including enriching the morphology of solid-liquid interface [1–3] and increasing the lithium intercalation sites embedded with versatile heteroatoms have attracted great attention to improve the electrochemical performance of carbonaceous anodic materials [4–8]. Among them, nanostructured morphologies [9–14] and heteroatoms embedment have been disclosed to be two of the most important approaches for carbonaceous anodes with brilliant, interesting, and enhanced physicochemical and electrochemical properties.

Various precursors with different heteroelement species [15–18] or increased amount of heteroatoms [4, 9, 10, 19–22] including N [20, 23–25], P [4, 15–18, 26–30], S [31–34], Si [9, 21, 22], and Sn-doping [7, 35, 36] have been explored to upgrade the carbonaceous anodic materials for Li⁺ ion storage due to their great high theoretical specific capacity of Li⁺ ion storage. Although boron could effectively adjust the lattice defect related to the structure disorder of carbon materials, there are quite few reports on boron-doped carbon as Li⁺ ion storage anode [37]. Previous reported boron-doped carbons were investigated as the cathode catalysts for Na-O batteries [38], carbon paste electrode [39], supercapacitor [40–43], and H₂ physisorption [44] with improved versatile characteristics including oxidation activity and electrochemical performance. One important reason for the lack research of boron-doped carbon is ascribed to the less of boron sources except for the reported BF₃ [45, 46], HBO₃ [38, 40], and BCl₃ [47]. Another reason was the low doping ratio with few reports surpassing over 2 at% (4.8–9.6 at% [40], 5.57 at% [45], and 7 at% [44]) most likely due to the difficulty to form homogeneously dispersed boron and unstable C-B bond tending to be hydrolysis [45]. In this case, it is emergent and necessary to develop a kind of facile synthesis and high yield boron-doped carbon for high performed carbonaceous anodic lithium storage materials.

In this contribution, we have successfully achieved one new boron-doped carbon (BC) by a two-step procedure (Scheme 1) including hydrothermal reaction at 180°C and carbonization at 800°C under Ar atmosphere with commercial available starch and orthoboric acid (H₃BO₃) and active agent as the carbon and boron sources. BC was characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), Raman spectrum, field emission scanning electron microscope (FE-SEM), electrochemical tests including cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) with cycle stability and columbic efficiency, and rate performance of Li⁺ ion battery.

2. Results and Discussion

2.1. Synthesis

The boron-doped carbon was synthesized via a two-step procedure [48–50]. The most important procedure was the first step, of which the high temperature, high pressure, and ionic water got three purposes: (a) to promote the swelling and reshaping of microcrystal bundle of starch with deionized water; (b) to improve the penetration and absorbance of HBO₃ into the microcrystal bundle of starch; (c) to speed up the bonding of HBO₃ with -OH groups of starch. It has been reported that the morphology of starch powder tended to be nano-/microspheres [49, 50] with sizes in a certain range. A black powder was finally obtained as boron-doped carbon (BC) representing a successful carbonation procedure in the second step.

2.2. Morphology

To find out the detailed morphology of BC, FE-SEM was applied. Figure 1(a) presented with structures as imperfect round nano-/microballs spreading in the range of 500 nm–5 μm with magnificent picture as shown in Figure 1(b). The low intensity meant the weak graphitization for BC. Calculated with Bragg’s Law ( Å), 002 peak was 0.40 nm (22.3°) and 2.08 nm (43.3°) both wider compared to the smallest graphitic spacing (002) 0.34 nm [51] and 0.21 nm [52], hinting the more crystalline defects of this new boron-doped carbon compared to graphite.

(a)

(b)

2.3. Raman Spectrum

As depicted in Figure 2(b), the Raman spectrum exhibited two distinct peaks at D banded ca. 1336 cm⁻¹ and G banded ca. 1588 cm⁻¹ representing graphitic and disordered sp²-carbon atoms of BC. The more intensive G bands marked the typical graphitic lattice vibration [53, 54]. The less intensive D bands represented the defect lattice vibration [55, 56]. The intensity ratio of D-band versus G-band value was calculated to be 0.985 indicating the structural and intrinsic defects and amorphous disorder [57–60] for BC.

(a)

(b)

2.4. X-Ray Photoelectron Spectroscopy (XPS)

XPS was measured to analyze the elemental species and their corresponding atom percentage in the obtained boron-doped carbon. As presented in Figure 3(a), BC mainly contained C, B, and O dopants with three characteristic peaks at ~284 eV, ~192 eV, and ~532 eV corresponding to C 1s, B 1s, and O 1s, respectively. For BC, the total contents of C, B, and O elements were 84.06 at%, 2.03 at%, and 13.91 at%, respectively.

(a)

(b)

(c)

(d)

In Figure 3(b), the C 1s spectrum of the BC could be deconvoluted into several individual peaks. The top peak at ca. 284.4 eV was most likely ascribed to the sp²-C of C=C double bonds [15–18, 27]. However, the C 1s of B-C-X could not be observed due to the low percentage. According to the fact of boron-doping ratio, the second peak at 285.5 eV was partially ascribed to the C-B bond which was buried in the second peak with other bond species. Partial of the second peak and the last one was defined as the signal of C-O/C=O bonds [16, 17]. These C of BC took corresponding ratio as 56.94 at%, 21.29 at%, and 5.2 at%, respectively. In Figure 3(c), after analyzing the high resolution spectra of BC sample in the range of 180–196 eV. The high resolution B 1s peak at 191.6 eV was evidence for the existence of B species [39, 46]. The splitted two peaks at 191.2 eV and 192.6 eV took 0.58 at% and 1.55 at%, respectively, belonging to B 1s of B-C₃, B-C₂O with different bonding species [18]. In Figure 3(d), the O 1s spectrum of BC was also detected and divided to be two peaks at 531.9 eV and 533.6 eV covering 2.60 at% and 11.84 at% and matched with the O 1s from O=C double bond and O-C single bond, respectively. Neither for O 1s was observed from B-O bond due to the low percentage.

2.5. Electrochemical Performance

Figure 4(a) presents the first three voltage curves of BC electrode measured by cyclic voltammogram (CV) at room temperature from 0.005 V to 3.0 V with a 0.5 mV s⁻¹ scan speed. The discharge curve of 1st cycle has not covered the 2nd and 3rd. The initial obvious sharp peaks at 0.01–0.7 V were most likely induced by the solid electrolyte interphase (SEI) layer [61–65]. Figure 4(b) represented the rate cycle curve at several increased current densities from 0.2 C, 0.5 C, 1 C, 2 C, and 5 to 10 C. At 0.2 C, there was a great decrease from the initial irreversible discharge capacity (2059 mAh g^–1) to the initial reversible charge capacity (1030 mAh g^–1) which was most likely induced by the SEI reaction. However, at the 1st reversible cycle, the specific discharge capacity of BC electrode reached as high as 964 mAh g^–1 and stabilized at 699 mAh g^–1 by the end of the 11th cycle which were nearly two times higher than the theoretical top value of graphite electrode (372 mAh g^–1) with the LiC₆ mechanism [63–65]. At the highest current density of 10 C, the capacity kept at ~116.8 mAh g^–1 till the 57th cycle [66–70]. When the current density was adjusted back to 0.2 C at the 70th cycle, the discharge capacity recovered to 490 mAh g^–1 for BC electrode.

(a)

(b)

(c)

Figure 4(c) shows the cycleability and columbic efficiency at a current density of 0.2 C of BC electrode. The BC electrode possessed stable cycle stability with the corresponding capacity as high as 356 mAh g^–1 after 79 cycles at 0.5 C. The 1st irreversible discharge capacity of BC reached 1829 mAh g^–1. Beginning with the 37th cycle, the discharge capacity stabilized between 386 and 357 mAh g^–1 till the 79th cycle. However, the columbic efficiencies are almost over 90% from the 2nd cycle to the 79th cycle.

As presented in Figure 5, The nano-/microstructures of BC particles determined the charge-transfer process of lithium ion insertion/extraction reaction [67, 68]. According the reported literature, the calculated value as 138 Ω for BC electrode was regarded as a composite resistance value determining the charge transfer of Li⁺ ions insertion/extraction [69, 70]. The composite resistance value contained the Li⁺ ions migration through the SEI film and charge-transfer resistance. As illustrated above, the carbonaceous body of BC played a role as the conductive channels [20, 23, 71] for electron transportation. The enlarged electrode/electrolyte interface of BC could promote the rapid absorption and release of Li⁺ ions with fast charge-transfer process. Meanwhile, the transport distances of Li⁺ ions were shortened on the carbon framework.

3. Conclusions

In summary, a novel boron-doped carbon has been obtained by a two-step approach hydrothermal reaction and carbonization treatment and explored as anode materials for Li⁺ ion battery. The ratio of boron-doping reached as high as 2.03 at%. The morphology presented as perfect nano-/microballs ranging from 500 nm to 5 μm. At a current density of 0.5 C, BC electrode exhibited good cycle ability with a discharge capacity of 356 mAh g^–1 till 79 cycles. We gave a facile approach to reach a boron-doped carbon. Further investigation to much higher ratio of boron-doping is undergoing for more highly performed Li⁺ ion battery.

4. Experimental Section

4.1. Materials

Potato starch was purchased from supermarket and H₃BO₃, and ZnCl₂ [72–74] were purchased from Sigma-Aldrich Co., Ltd. Other reagents and solvents were purchased from Energy Co., Ltd. All solvents were used without further purification.

4.2. Synthesis of BC Nano-/Microballs

There were mainly two steps for the synthetic routine. In the first step, the mixture of HBO₃, starch and deionized water was treated with hydrothermal reaction under a high temperature circumstance at 180°C. In the second step, the starch particles loaded with HBO₃ were grinded with overdose ZnCl₂ to isolate the starch particles and avoid the conglutination and then carbonized at 800°C for 2 h under Ar atmosphere. The detailed procedure was carried out as 10 g potato starch, 7.14 g H₃BO₃, and 180 ml deionized water was added to hydrothermal reactor and heated at 180°C for 24 h. After cooling to room temperature, brown yellow powder was obtained by vacuum filtration, washed by deionized water, and dried at vacuum oven at 120°C overnight. The powder was grinded with ZnCl₂ (1 : 4, weight ratio) for 15 min and divided to be three parts which were calcined at 800°C for 2 h with a heat ascending rate of 5°C min^–1, respectively. The obtained three kinds of black powder were washed by HCl (6 mol L^–1) and deionized water till pH = 7.0 giving target boron-doped carbon materials entitled BC. The particles were scanned by FE-SEM and confirmed to be nano-/microballs.

4.3. Methods

Field emission scanning electron microscopy (Hitachi S-4800, Tokyo, Japan) was used to observe the micromorphology of particles. Bruker D8 X-ray diffractometer with Cu Kα Radiation (λ = 1.5405 Å) was used to measure the X-ray diffraction (XRD) patterns of aggregate sample. WITec alpha 300M+ micro-Raman confocal microscopy was used to test collect the Raman spectra of as-prepared sample. Thermo Scientific ESCALAB 250XI system with a monochromatic Al Kα X-ray source was used to carry out the XPS measurements of elemental data.

4.4. Electrochemical Tests

The electrochemistry property of BC was tested with button cells. Pure lithium was used as the counterelectrode and reference electrode. The working electrodes were fabricated by mixing the mixture of BC and polyvinylidene fluoride (PVDF) (90 wt% : 10 wt%) in N-methyl-2-pyrrolidone (NMP). The obtained mixture was coated onto Al sheet and dried for 12 h in a vacuum oven. The electrolyte was a 1.0 mol L^–1 LiPF₆ in Et₂CO₃/Me₂CO₃. The electrodes were assembled into button cells in an Ar-filled glove box (moisture/oxygen < 0.1 ppm). The galvanostatic tests of the button cells were measured with a NEWARE battery-testing system. The alternative current (AC) impedance was carried out on a CHI 760D electrochemical workstation (CH Instruments, Inc.).

Conflicts of Interest

The authors declare that they have no conflicts of interest.

References

L. Bhattacharjee, R. Manoharan, K. Mohanta, and R. R. Bhattacharjee, “Conducting carbon quantum dots-a nascent nanomaterial,” Journal of Materials Chemistry A, vol. 3, no. 4, pp. 1580–1586, 2015.
View at: Publisher Site | Google Scholar
G. Chen, L. Yan, H. Luo, and S. Guo, “Nanoscale Engineering of Heterostructured Anode Materials for Boosting Lithium-Ion Storage,” Advanced Materials, vol. 28, no. 35, pp. 7580–7602, 2016.
View at: Publisher Site | Google Scholar
C. Chen, D. Yu, G. Zhao et al., “Three-dimensional scaffolding framework of porous carbon nanosheets derived from plant wastes for high-performance supercapacitors,” Nano Energy, vol. 27, pp. 377–389, 2016.
View at: Publisher Site | Google Scholar
C. Zhang, N. Mahmood, H. Yin, F. Liu, and Y. Hou, “Synthesis of phosphorus-doped graphene and its multifunctional applications for oxygen reduction reaction and lithium ion batteries,” Advanced Materials, vol. 25, no. 35, pp. 4932–4937, 2013.
View at: Publisher Site | Google Scholar
W. Ai, J. Jiang, J. Zhu et al., “Toward high energy organic cathodes for li-ion batteries: a case study of vat dye/graphene composites,” Advanced Energy Materials, vol. 5, Article ID 1500559, 2015.
View at: Google Scholar
L. Chuenchom, R. Kraehnert, and B. M. Smarsly, “Recent progress in soft-templating of porous carbon materials,” Soft Matter, vol. 8, no. 42, pp. 10801–10812, 2012.
View at: Publisher Site | Google Scholar
S. Dutta, A. Bhaumik, and K. C.-W. Wu, “Hierarchically porous carbon derived from polymers and biomass: Effect of interconnected pores on energy applications,” Energy & Environmental Science, vol. 7, no. 11, pp. 3574–3592, 2014.
View at: Publisher Site | Google Scholar
H. Song, N. Li, H. Cui, and C. Wang, “Enhanced storage capability and kinetic processes by pores- and hetero-atoms- riched carbon nanobubbles for lithium-ion and sodium-ion batteries anodes,” Nano Energy, vol. 4, pp. 81–87, 2014.
View at: Publisher Site | Google Scholar
J. H. Park, L. Gu, G. von Maltzahn, E. Ruoslahti, S. N. Bhatia, and M. J. Sailor, “Biodegradable luminescent porous silicon nanoparticles for in vivo applications,” Nature Materials, vol. 8, no. 4, pp. 331–336, 2009.
View at: Publisher Site | Google Scholar
H. Chen, Y. Wei, J. Wang, W. Qiao, L. Ling, and D. Long, “Controllable Nitrogen Doping of High-Surface-Area Microporous Carbons Synthesized from an Organic-Inorganic Sol-Gel Approach for Li-S Cathodes,” ACS Applied Materials & Interfaces, vol. 7, no. 38, pp. 21188–21197, 2015.
View at: Publisher Site | Google Scholar
K. Ariga, A. Vinu, Y. Yamauchi, Q. Ji, and J. P. Hill, “Nanoarchitectonics for mesoporous materials,” Bulletin of the Chemical Society of Japan, vol. 85, no. 1, pp. 1–32, 2012.
View at: Publisher Site | Google Scholar
Y. Zhai, Y. Dou, D. Zhao, P. F. Fulvio, R. T. Mayes, and S. Dai, “Carbon materials for chemical capacitive energy storage,” Advanced Materials, vol. 23, no. 42, pp. 4828–4850, 2011.
View at: Publisher Site | Google Scholar
Y. Chen, X. Li, K. Park et al., “Hollow carbon-nanotube/carbon-nanofiber hybrid anodes for Li-ion batteries,” Journal of the American Chemical Society, vol. 135, no. 44, pp. 16280–16283, 2013.
View at: Publisher Site | Google Scholar
J. Yang, J. Xie, X. Zhou et al., “Functionalized n-doped porous carbon nanofiber webs for a lithium-sulfur battery with high capacity and rate performance,” The Journal of Physical Chemistry C, vol. 118, no. 4, pp. 1800–1807, 2014.
View at: Publisher Site | Google Scholar
J. P. Paraknowitsch and A. Thomas, “Doping carbons beyond nitrogen: An overview of advanced heteroatom doped carbons with boron, sulphur and phosphorus for energy applications,” Energy & Environmental Science, vol. 6, no. 10, pp. 2839–2855, 2013.
View at: Publisher Site | Google Scholar
M. Xing, F. Shen, B. Qiu, J. Zhang, and Sci., “Highly-dispersed boron-doped graphene nanosheets loaded with TiO2 nanoparticles for enhancing CO2 photoreduction,” Science Reports, vol. 4, p. 6341, 2014.
View at: Publisher Site | Google Scholar
A. Kalijadis, J. DorCevidć, T. Trtić-Petrović et al., “Preparation of boron-doped hydrothermal carbon from glucose for carbon paste electrode,” Carbon, vol. 95, pp. 42–50, 2015.
View at: Publisher Site | Google Scholar
Y. Lin, Y. Zhu, B. Zhang, Y. A. Kim, M. Endo, and D. S. Su, “Boron-doped onion-like carbon with enriched substitutional boron: The relationship between electronic properties and catalytic performance,” Journal of Materials Chemistry A, vol. 3, no. 43, pp. 21805–21814, 2015.
View at: Publisher Site | Google Scholar
S. Wang, L. Zhang, Z. Xia et al., “BCN graphene as efficient metal-free electrocatalyst for the oxygen reduction reaction,” Angewandte Chemie International Edition, vol. 51, no. 17, pp. 4209–4212, 2012.
View at: Publisher Site | Google Scholar
A. S. Yatsenko, A. K. Marrone, and H. R. Shcherbata, “High lithium anodic performance of highly nitrogen-doped porous carbon prepared from a metal-organic framework,” Nature Communications, vol. 5, 5261, 2014.
View at: Publisher Site | Google Scholar
Y. Shen, P. Zhao, and Q. Shao, “Porous silica and carbon derived materials from rice husk pyrolysis char,” Microporous and Mesoporous Materials, vol. 188, pp. 46–76, 2014.
View at: Publisher Site | Google Scholar
J. M. Pan, J. F. Pan, X. N. Cheng et al., “Synthesis of hierarchical porous silicon oxycarbide ceramics from preceramic polymer and wood biomass composites,” Journal of the European Ceramic Society, vol. 34, pp. 249–256, 2014.
View at: Google Scholar
L. Qie, W.-M. Chen, Z.-H. Wang et al., “Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability,” Advanced Materials, vol. 24, no. 15, pp. 2047–2050, 2012.
View at: Publisher Site | Google Scholar
C. Hu, Y. Xiao, Y. Zhao et al., “Highly nitrogen-doped carbon capsules: Scalable preparation and high-performance applications in fuel cells and lithium ion batteries,” Nanoscale, vol. 5, no. 7, pp. 2726–2733, 2013.
View at: Publisher Site | Google Scholar
H. Wang, M. Xie, L. Thia, A. Fisher, and X. Wang, “Strategies on the design of nitrogen-doped graphene,” The Journal of Physical Chemistry Letters, vol. 5, no. 1, pp. 119–125, 2014.
View at: Publisher Site | Google Scholar
J. Yi, Y. Qing, C. Wu et al., “Lignocellulose-derived porous phosphorus-doped carbon as advanced electrode for supercapacitors,” Journal of Power Sources, vol. 351, pp. 130–137, 2017.
View at: Publisher Site | Google Scholar
W. Ai, X. Wang, C. Zou et al., “Boric acid-mediated B,N-codoped chitosan-derived porous carbons with a high surface area and greatly improved supercapacitor performance,” Small, vol. 13, Article ID 1602010, 2017.
View at: Google Scholar
J. Wang, L. Shen, Y. Xu, H. Dou, and X. Zhang, “Lamellar-structured biomass-derived phosphorus- and nitrogen-co-doped porous carbon for high-performance supercapacitors,” New Journal of Chemistry, vol. 39, no. 12, pp. 9497–9503, 2015.
View at: Publisher Site | Google Scholar
C. Huang, A. M. Puziy, T. Sun et al., “Capacitive behaviours of phosphorus-rich carbons derived from lignocelluloses,” Electrochimica Acta, vol. 137, pp. 219–227, 2014.
View at: Publisher Site | Google Scholar
J. M. Rosas, R. Ruiz-Rosas, J. Rodríguez-Mirasol, and T. Cordero, “Kinetic study of the oxidation resistance of phosphorus-containing activated carbons,” Carbon, vol. 50, no. 4, pp. 1523–1537, 2012.
View at: Publisher Site | Google Scholar
X. Liu, W. Huang, D. Wang, J. Tian, and Z. Shan, “A nitrogen-doped 3D hierarchical carbon/sulfur composite for advanced lithium sulfur batteries,” Journal of Power Sources, vol. 355, pp. 211–218, 2017.
View at: Publisher Site | Google Scholar
P. Kanninen, N. D. Luong, L. H. Sinh et al., “Highly active platinum nanoparticles supported by nitrogen/sulfur functionalized graphene composite for ethanol electro-oxidation,” Electrochimica Acta, vol. 242, pp. 315–326, 2017.
View at: Publisher Site | Google Scholar
M. Chen, S. Jiang, C. Huang et al., “Honeycomb-like Nitrogen and Sulfur Dual-Doped Hierarchical Porous Biomass-Derived Carbon for Lithium–Sulfur Batteries,” ChemSusChem, vol. 10, no. 8, pp. 1803–1812, 2017.
View at: Publisher Site | Google Scholar
X. Gu, Y. Wang, C. Lai et al., “Microporous bamboo biochar for lithium-sulfur batteries,” Nano Research, vol. 8, no. 1, pp. 129–139, 2014.
View at: Publisher Site | Google Scholar
M. R. Palacin, “Recent advances in rechargeable battery materials: a chemist’s perspective,” Chemical Society Reviews, vol. 38, pp. 2565–2575, 2009.
View at: Google Scholar
Z. Zhu, S. Wang, J. Du et al., “Ultrasmall Sn nanoparticles embedded in nitrogen-doped porous carbon as high-performance anode for lithium-ion batteries,” Nano Letters, vol. 14, no. 1, pp. 153–157, 2014.
View at: Publisher Site | Google Scholar
M. Kawaguchi, T. Kawashima, and J. Chem, “Synthesis of a new graphite-like layered material of composition BC₃N,” Journal of the Chemical Society, Chemical Communications, vol. 21, pp. 1133-1134, 1993.
View at: Google Scholar
C. Shu, Y. Lin, B. Zhang, S. B. Abd Hamid, and D. Su, “Mesoporous boron-doped onion-like carbon as long-life oxygen electrode for sodium-oxygen batteries,” Journal of Materials Chemistry A, vol. 4, no. 17, pp. 6610–6619, 2016.
View at: Publisher Site | Google Scholar
A. Kalijadis, J. Đorđević, T. Trtić-Petrović et al., “Preparation of boron-doped hydrothermal carbon from glucose for carbon paste electrode,” Carbon, vol. 95, pp. 42–50, 2015.
View at: Publisher Site | Google Scholar
H. Guo and Q. Gao, “Boron and nitrogen co-doped porous carbon and its enhanced properties as supercapacitor,” Journal of Power Sources, vol. 186, no. 2, pp. 551–556, 2009.
View at: Publisher Site | Google Scholar
K. C. Mondal, A. M. Strydom, Z. Tetana et al., “Boron-doped carbon microspheres,” Materials Chemistry and Physics, vol. 114, no. 2-3, pp. 973–977, 2009.
View at: Publisher Site | Google Scholar
Z. Ling, G. Wang, M. Zhang et al., “Boric acid-mediated B,N-codoped chitosan-derived porous carbons with a high surface area and greatly improved supercapacitor performance,” Nanoscale, vol. 7, no. 12, pp. 5120–5125, 2015.
View at: Publisher Site | Google Scholar
N. Shcherban, S. Filonenko, P. Yaremov, V. Dyadyun, I. Bezverkhyy, and V. Ilyin, “Boron-doped nanoporous carbons as promising materials for supercapacitors and hydrogen storage,” Journal of Materials Science, vol. 52, no. 3, pp. 1523–1533, 2017.
View at: Publisher Site | Google Scholar
T. C. M. Chung, Y. Jeong, Q. Chen, A. Kleinhammes, and Y. Wu, “Synthesis of microporous boron-substituted carbon (B/C) materials using polymeric precursors for hydrogen physisorption,” Journal of the American Chemical Society, vol. 130, no. 21, pp. 6668-6669, 2008.
View at: Publisher Site | Google Scholar
K. C. Mondal, A. M. Strydom, R. M. Erasmus, J. M. Keartland, and N. J. Coville, “Physical properties of CVD boron-doped multiwalled carbon nanotubes,” Materials Chemistry and Physics, vol. 111, no. 2-3, pp. 386–390, 2008.
View at: Publisher Site | Google Scholar
J.-I. Ozaki, N. Kimura, T. Anahara, and A. Oya, “Preparation and oxygen reduction activity of BN-doped carbons,” Carbon, vol. 45, no. 9, pp. 1847–1853, 2007.
View at: Publisher Site | Google Scholar
M. Kawaguchi, T. Kawashima, and J. Chem, “Synthesis of a new graphite-like layered material of composition BC₃N,” Journal of the Chemical Society, Chemical Communications, pp. 1133-1134, 1993.
View at: Google Scholar
M. M. Titirici, A. Thomas, S.-H. Yu, J.-O. Müller, and M. Antonietti, “A direct synthesis of mesoporous carbons with bicontinuous pore morphology from crude plant material by hydrothermal carbonization,” Chemistry of Materials, vol. 19, no. 17, pp. 4205–4212, 2007.
View at: Publisher Site | Google Scholar
T.-H. Mu, M. Zhang, L. Raad, H.-N. Sun, and C. Wang, “Effect of α-Amylase Degradation on Physicochemical Properties of Pre-High Hydrostatic Pressure-Treated Potato Starch,” Plos One, vol. 10, Article ID e0143620, 2015.
View at: Publisher Site | Google Scholar
M. Kaur, N. Singh, K. S. Sandhu, and H. S. Guraya, “Physicochemical, morphological, thermal and rheological properties of starches separated from kernels of some Indian mango cultivars (Mangifera indica L.),” Food Chemistry, vol. 85, no. 1, pp. 131–140, 2004.
View at: Publisher Site | Google Scholar
T. Kyotani, T. Nagai, S. Inoue, and A. Tomita, “Formation of New Type of Porous Carbon by Carbonization in Zeolite Nanochannels,” Chemistry of Materials, vol. 9, no. 2, pp. 609–615, 1997.
View at: Publisher Site | Google Scholar
S. F. Ahmed, S. Das, M. K. Mitra, and K. K. Chattopadhyay, “Molecular-level design of hierarchically porous carbons codoped with nitrogen and phosphorus capable of in situ self-activation for sustainable energy systemstems,” Indian Journal Pure Applied Physics, vol. 44, pp. 700–704, 2006.
View at: Google Scholar
L. Nikiel and P. W. Jagodzinski, “Raman spectroscopic characterization of graphites: A re-evaluation of spectra/ structure correlation,” Carbon, vol. 31, no. 8, pp. 1313–1317, 1993.
View at: Publisher Site | Google Scholar
A. C. Ferrari and J. Robertson, “Interpretation of Raman spectra of disordered and amorphous carbon,” Physical Review B: Condensed Matter and Materials Physics, vol. 61, no. 20, pp. 14095–14107, 2000.
View at: Publisher Site | Google Scholar
M. J. Matthews, M. A. Pimenta, G. Dresselhaus, M. S. Dresselhaus, and M. Endo, “Origin of dispersive effects of the Raman D band in carbon materials,” Physical Review B: Condensed Matter and Materials Physics, vol. 59, no. 10, pp. R6585–R6588, 1999.
View at: Publisher Site | Google Scholar
L. Bokobza, J.-L. Bruneel, and M. Couzi, “Raman spectroscopic investigation of carbon-based materials and their composites. Comparison between carbon nanotubes and carbon black,” Chemical Physics Letters, vol. 590, pp. 153–159, 2013.
View at: Publisher Site | Google Scholar
R. N. Singh and R. Awasthi, “Low-macroscopic field emission from carbon fibers synthesized by direct current plasma enhanced chemical vapor deposition,” Catalysis Science & Technology Home, vol. 1, pp. 778–783, 2011.
View at: Publisher Site | Google Scholar
W. Qian, R. Hao, Y. Hou et al., “Solvothermal-assisted exfoliation process to produce graphene with high yield and high quality,” Nano Research, vol. 2, no. 9, pp. 706–712, 2009.
View at: Publisher Site | Google Scholar
Y. Zhou, Q. Bao, L. A. L. Tang, Y. Zhong, and K. P. Loh, “Hydrothermal dehydration for the "green" reduction of exfoliated graphene oxide to graphene and demonstration of tunable optical limiting properties,” Chemistry of Materials, vol. 21, no. 13, pp. 2950–2956, 2009.
View at: Publisher Site | Google Scholar
D. R. Rolison, “Catalytic nanoarchitectures—the importance of nothing and the unimportance of periodicity,” Science, vol. 299, no. 5613, pp. 1698–1701, 2003.
View at: Publisher Site | Google Scholar
L. G. Bulusheva, A. V. Okotrub, A. G. Kurenya et al., “Electrochemical properties of nitrogen-doped carbon nanotube anode in Li-ion batteries,” Carbon, vol. 49, no. 12, pp. 4013–4023, 2011.
View at: Publisher Site | Google Scholar
C. Kim, K. S. Yang, M. Kojima et al., “Fabrication of electrospinning-derived carbon nanofiber webs for the anode material of lithium-ion secondary batteries,” Advanced Functional Materials, vol. 16, no. 18, pp. 2393–2397, 2006.
View at: Publisher Site | Google Scholar
S. B. Yang, X. L. Feng, L. J. Zhi, Q. A. Cao, J. Maier, and K. Müllen, “Nanographene-constructed hollow carbon spheres and their favorable electroactivity with respect to lithium storage,” Advanced Materials, vol. 22, no. 7, pp. 838–845, 2010.
View at: Publisher Site | Google Scholar
S. Goriparti, E. Miele, F. De Angelis, E. Di Fabrizio, R. P. Zaccaria, and C. Capiglia, “Review on recent progress of nanostructured anode materials for Li-ion batteries,” Journal of Power Sources, vol. 257, pp. 421–443, 2014.
View at: Publisher Site | Google Scholar
J. Wu, X. Rui, G. Long, W. Chen, Q. Yan, and Q. Zhang, “Pushing Up Lithium Storage through Nanostructured Polyazaacene Analogues as Anode,” Angewandte Chemie International Edition, vol. 54, no. 25, pp. 7354–7358, 2015.
View at: Publisher Site | Google Scholar
S. B. Yang, X. L. Feng, L. J. Zhi, Q. A. Cao, J. Maier, and K. Mullen, “Nanographene-constructed hollow carbon spheres and their favorable electroactivity with respect to lithium storage,” Advanced Materials, vol. 22, pp. 838–842, 2010.
View at: Google Scholar
F. Cheng, J. Liang, Z. Tao, and J. Chen, “Functional materials for rechargeable batteries,” Advanced Materials, vol. 23, no. 15, pp. 1695–1715, 2011.
View at: Publisher Site | Google Scholar
J. Yi, X. P. Li, S. J. Hu et al., “Preparation of hierarchical porous carbon and its rate performance as anode of lithium ion battery,” Journal of Power Sources, vol. 196, no. 16, pp. 6670–6675, 2011.
View at: Publisher Site | Google Scholar
N. A. Kaskhedikar and J. Maier, “Lithium storage in carbon nanostructures,” Advanced Materials, vol. 21, no. 25-26, pp. 2664–2680, 2009.
View at: Publisher Site | Google Scholar
X. C. Liu, S. M. Li, J. Mei et al., “From melamine-resorcinol-formaldehyde to nitrogen-doped carbon xerogels with micro- and meso-pores for lithium batteries,” Journal of Materials Chemistry, pp. 14429–14438, 2014.
View at: Google Scholar
M.-M. Titirici, R. J. White, N. Brun et al., “Sustainable carbon materials,” Chemical Society Reviews, vol. 44, no. 1, pp. 250–290, 2015.
View at: Publisher Site | Google Scholar
B. B. Chang, Y. L. Wang, K. M. Pei, S. M. Yang, and X. P. Dong, “ZnCl₂-activated porous carbon spheres with high surface area and superior mesoporous structure as an efficient supercapacitor electrode,” RSC Advances, vol. 4, pp. 40546–40552, 2014.
View at: Google Scholar
H. J. Chen, H. M. Wei, N. Fu et al., “Nitrogen-doped porous carbon using ZnCl₂ as activating agent for high-performance supercapacitor electrode materials,” Journal of Materials Science, vol. 53, pp. 2669–2684, 2018.
View at: Google Scholar
G. Ma, Q. Yang, K. Sun et al., “Nitrogen-doped porous carbon derived from biomass waste for high-performance supercapacitor,” Bioresource Technology, vol. 197, pp. 137–142, 2015.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2018 Xinhua Lu and Lin Chen. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

1480

Downloads

1215

Citations