Abstract

The neuroprotective effects of the ursodeoxycholic acid- (UDCA-) loaded pullulan acetate (PA) (UDCA-PA) nanospheres stabilized by poly(vinyl alcohol) (PVA) were identified by in vitro study. The UDCA-PA nanospheres were constructed by nanoemulsion process. The UDCA-PA nanospheres were analyzed using Fourier transform-infrared spectroscopy (FT-IR) and transmission electron microscopy (TEM). Then, the UDCA-PA nanospheres were used to treat PC-12 neuronal cells, which were formerly triggered by glutamate-induced excitotoxicity. As a result, the cells treated with the UDCA-PA nanospheres showed higher survival rate against glutamate-induced excitotoxicity. Furthermore, the UDCA-PA nanospheres decreased immunoreactivity of Annexin V, a membrane marker for apoptotic cells, in PC-12 with glutamate-induced injury. Particularly, the UDCA-PA nanospheres decreased the level of apoptosis-related proteins such as caspase-3. Taken together, the UDCA-PA nanospheres increased neuroprotective effects against glutamate-induced neuronal damage via inhibition of apoptosis at low concentration.

1. Introduction

Primary biliary cirrhosis (PBC) and the related disorders are raised by obstruction caused with a variety of damage to the bile ducts in the liver [1]. Much like other forms of liver disease, PBC permanently damages the liver and eventually can lead to liver failure because of irreversible replacement of normal liver parenchyma by fibrotic scar tissue [2]. Liver failure can induce generalized hyperammonemia that is thought to be the underlying cause of hepatic encephalopathy (HE) [3, 4]. The precise pathological mechanisms underlying hyperammonemia-mediated HE are not clear, and the deregulation of multiple neurotransmitter systems has been reported as the key [5].

Among the diverse neurotransmitter systems in human, the glutamatergic neurotransmitter system is seemingly the most affected in HE [6]. Numerous experimental models of acute liver failure established a direct link between HE and increased brain glutamate load [79]. Mechanistically, acute injections of ammonia into the brain triggered rapid neuronal death mediated through the excitotoxicity characterized by overactivation of N-methyl-D-aspartate (NMDA) receptor, a subset of ionotropic glutamate receptor [10]. The downstream targets of NMDA receptor overactivation are complex and appear to involve the interplay of a number of factors, including oxidative stress, activation of certain cell-cycle genes, and apoptosis [1113]. In fact, expressions of antiapoptotic proteins such as Bcl-2 and Bcl-xL are downregulated, whereas proapoptotic Bax expression is enhanced in neurons of experimental model of HE [14]. Caspase-3, an important apoptotic executioner in many cell types, is also activated in neurons in animal model of HE [15]. Thus, pharmaceutical inhibition of glutamate-mediated excitotoxicity might confer the preventive means for development of PBC-associated HE by reducing the neuronal apoptosis.

The UDCA is the currently accepted oral pharmaceutic for treating PBC [16]. Combined analysis of the three largest randomized clinical trials of UDCA for PBC indicated that UDCA improved clinical and biochemical indices and prolonged survival free of liver transplantation [17]. Although the cytoprotective mechanisms by which UDCA acts remain unclear, experimental evidence suggests three primary mechanisms of action: protection against the cytotoxicity of hydrophobic bile acids, stimulation of hepatobiliary secretion, and protection of hepatocytes against bile acid-induced apoptosis [1820]. However, to the best our knowledge, reports to elucidate whether usage of UDCA could be beneficial on HE prevention in in vivo setting through direct modulation of excitotoxic neuronal death are currently absent. At least partly, the lack of study on therapeutic effect of UDCA on HE in vivo is thought to be due to the limited solubility and/or bioavailability of UDCA. In fact, many bile acid formulations including UDCA exist as a solid form of bile acid either as a component of a tablet or as a particle and/or precipitate in a solution or suspension [21]. Complete solubilization of UDCA crystals might be possible at an endoluminal pH in small intestine over about 8.4, but this value has been unobtainable ex vivo [22]. Accordingly, many existing forms of UDCA have not been appropriate for systemic administration [23]. This, in turn, means that the levels of bile in systemic circulation following administration of many existing forms of UDCA may be extremely low. Therefore, many UDCA formulations have limited utility for delivering UDCA systemically and even less utility for delivering UDCA to the brain [24].

Treatment with a target oriented Drug Delivery System (DDS), which enables the insoluble drugs to be soluble and thus enables direct intravenous administration of a drug to a patient, is recognized as a promising technology because its side effects are remarkably diminished while preserving original therapeutic effects. Polymer nanoparticles stabilized by surfactants provide specific benefits with regard to the stable and controllable release of various drugs that are loaded when administered intravenously. DDS study has evolved polymers that can effectively transport the drug to a target place and their therapeutic benefits while minimizing their side effects [25, 26].

In this study, we manufactured the novel functionalized nanospheres, namely, the UDCA-PA, by encapsulating hydrophobic UDCA with amphiphilic pullulan acetate nanosphere to enhance the dispersability in aqueous media. As described above, as glutamate-induced excitotoxicity is known to be the key mechanism underlying the HE-mediated neuronal death, we examined the in vitro neuroprotective effects and the possible antiapoptotic mechanisms of the UDCA-PA using PC-12 cells, rat pheochromocytoma cells, formerly challenged with glutamate-induced excitotoxicity.

2. Experimental

2.1. Chemical and Reagents

Ursodeoxycholic acid (C24H40O4) was friendly provided by Daewoong Pharmaceutical Co., Ltd.; pullulan and pyrene were supplied by Tokyo Chemical Co., Ltd. (Tokyo, Japan). Formamide (98.5%), ethylenediamine (EDA), and L-glutamic acid were supplied by Junsei Chemical Co., Ltd. (Tokyo, Japan). Pyridine (99.5%) was purchased from Kanto Chemical Co., Inc. (Tokyo, Japan). Acetic anhydride (99%) and ethanol (EtOH, 99.9%) were purchased from Samchun. (Kyunggido, South Korea). Dichloromethane (DCM, 99.5%) was purchased from Biosesang (Seoul, South Korea). Poly(vinyl alcohol) (PVA, Mw of 15 kDa), uranyl acetate dehydrate (98%), dimethyl sulfoxide (DMSO, 99.5%), 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC), N-hydroxysuccinimide (NHS), fluorescein isothiocyanate (FITC), and 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) were supplied by Sigma-Aldrich (St. Louis, USA). All the chemicals were used without further purification. Triple distilled and deionized (DI) water is used throughout.

2.2. Cell Culture and Treatment

PC-12 cells were purchased from the Korean Cell Line Bank and maintained in DMEM medium supplemented with 10% fetal bovine serum (FBS) (v/v), 1% penicillin/streptomycin (P/S), and 1% HEPES in 5% CO2 at 37°C. PC-12 cells were cotreated with 6 mM glutamate and different concentrations of the UDCA-PA nanospheres for 24 h. In these experiments, glutamate was dissolved in 10 μL of hydrochloride (HCl) and 990 μL of DMEM. Control group was prepared by treatment of the same amount of DMEM.

2.3. Preparation of Pullulan Acetate

PA was prepared by earlier reported Motozato et al.’s method [27] with minor modifications. 2 g of pullulan was fully dissolved in 20 mL of formamide with a magnetic stirring for 4 h. 6 mL pyridine and 15 mL of acetic anhydride were added to the solution and suddenly formed white colored film-like precipitation. The agglomeration in mixture solution was fully dissolved with a magnetic stirring for 12 h. The color of the solution changed from transparent to gold. The solution was loaded in water bath with a magnetic string, with the temperature increased to 54°C, and kept for 48 h. A dark-brown mixture was obtained, which was further purified by triturating with 1,000 mL distilled water and 500 mL methanol. The solid material was dried in vacuum for 24 h. The sample was sealed in 50 mL vial stored at −20°C until further use [27].

2.4. Fourier Transform-Infrared Spectroscopy (FT-IR) Analysis

Fourier transform-infrared (FT-IR) spectra of pullulan, PA, UDCA, and UDCA-loaded PA nanoparticles were recorded at 20°C using an ALPHA FT-IR Spectrometer equipped with Platinum ATR (Bruker, USA). The samples were vacuum-dried before FT-IR scan. Spectra were measured with a resolution of in the range of 1 cm−1 and the wavenumber range was 4,000~400 cm−1. The samples were measured by dropping the samples on the surface of facet of diamond ATR without any specific preparation of specimens. Total of 24 scans were taken for each sample.

2.5. Critical Aggregation Concentration (CAC) of PA Nanoparticles in Aqueous Medium

The critical aggregation concentration (CAC) of PA nanoparticles was calculated by the fluorescence probe technique. Briefly, 36 uL pyrene solutions ( M) in acetone were added to a series of 15 mL tubes and followed by drying with N2 to evaporate the acetone. Afterward, a series of PA nanoparticles in the range 1.0–10-3 g/L were added to each tube. The final concentration of pyrene in each sample was  M. The tube was sonicated in an ultrasonic bath for 15 min for equilibrium and left overnight at room temperature. The emission spectra of the samples were performed at the range 300–360 nm using fluorospectrophotometer (RF-5301PC, Shimadzu Japan) at the excitation wavelength of 335 nm.

2.6. Preparation of UDCA-PA Nanospheres

The UDCA-PA nanospheres were synthesized by oil-in-water (o/w) emulsion-solvent evaporation method with minor modifications [28]. 10 mg UDCA and 100 mg PA were dissolved in 5 mL DCM into 20 mL vial with sonication; this constituted mixture. For primary emulsion, the mixture was dropped into 10 mL aqueous PVA (0.5%, w/w) solution with magnetic stirring (700 rpm). The mixture was using a probe sonicator for 30 s. The resulting colloidal suspension was centrifuged at 20,000 ×g for 30 min to obtain the UDCA-PA nanospheres. To remove the impurities and free UDCA, the sample was redispersed in DI water and precipitated 3 times at 20,000 ×g for 15 min each. Washed solid material was resuspend in DI water, subjected to prefreezing at −40°C for 12 h, and, furthermore, vacuum-dried at −110°C for 24 h by Speedvac [29]. The lyophilized powder was sealed in sealed 50 mL vial stored at −20°C until further use.

2.7. Calculation of Entrapment Efficiency (E%)

To increase the detection efficacy, FITC was attached to UDCA. First, 5 mg of UDCA was dissolved in 1 mL of ethanol; 1 mg of EDC and 1 mg of NHS were added and then reacted for 15 min. The sample was then precipitated by centrifugation and the upper part was decanted. The precipitate was washed twice with ethanol and redispersed in 1 mL of ethanol. Then, 50 μL of ethylenediamine was added and reacted for 1 h. The sample was precipitated using centrifugation and the supernatant was decanted. The precipitate was washed twice with ethanol again and redispersed in 1 mL of ethanol. UDCA-FITC sample was finally prepared by adding 1 mg FITC to amine activated UDCA and then reacting for an additional 24 h. The sample was dried for 24 h by Speedvac. Entrapment efficiency of the FITC-UDCA in nanoparticles was calculated as follows: After separation of nanoparticles from the aqueous buffer, the extract including the repeated washing was collected. To a 100 mL of this solution, 500 mL of phosphate buffer saline (PBS), pH-7.4, was added and the concentration of the FITC-UDCA was measured spectrophotometrically at 495 nm. The emission spectra of the samples were performed at 519 nm using fluorospectrophotometer (RF-5301PC, Shimadzu, Japan) at the excitation wavelength of 495 nm. Amount of FITC-UDCA present was calculated from the standard curve of the drug. Total amount of FITC-UDCA left in the aqueous extract was subtracted from the amount of FITC-UDCA originally added in the reaction medium, and the entrapment efficiency was calculated from the ratio of the amount of FITC-UDCA entrapped to the total amount of FITC-UDCA added ×100.

2.8. Release Profile of FITC-UDCA from Nanoparticles

A known amount of lyophilized powder of pullulan nanoparticles loaded with FITC-UDCA was dispersed in 10 mL of PBS, . 200 ml of the solution was distributed in eppendorf tubes and kept at 37°C. At a predetermined interval of time, the solution was filtered through a Millipore filter (100 kD cut off). Free FITC-UDCA present in aqueous buffer passed through the filter and its concentration was determined spectrophotometrically at max = 495 nm.

2.9. Transmission Electron Microscopy (TEM) Analysis

The particle size, morphology, and distribution quality of UDCA-PA nanospheres were analyzed by Hitachi H-7650 TEM (EVISA, Japan) following negative staining with uranyl acetate solution. TEM imaging was prepared from the UDCA-PA nanospheres resuspend in distilled water with sonication for 1 min. After sonication, 10 μg of the UDCA-PA nanospheres was mixed with 100 μL uranyl acetate solution and then dropped on TEM-copper grids. Representative samples of TEM images for the estimation of size and morphology of the UDCA-PA nanospheres.

2.10. MTT Assays

The cell viability was measured by MTT assay. In brief, PC-12 cells were seeded in 96-well culture plates at cell density of per well and maintained in 5% CO2 incubator at 37°C for 24 h. PC-12 cells were treated with various concentrations of UDCA-PA nanospheres (1, 5, 10, 25, and 50 μg/mL) with or without glutamate for 24 h. After adding the UDCA-PA nanospheres, the plates were further incubated for another 24 h. 10 μL of MTT solution (5 mg/ml) was added to each well in 96-well plate and incubated at 37°C for 4 h. The medium was carefully removed and cells which had formazan were dissolved with 100 μL of DMSO. The absorbance was measured at 540 nm using an ELx800uv microplate reader (BioTek Instruments, Inc., USA).

2.11. Annexin V Binding Assay

The cellular apoptosis was determined using an Annexin V & Dead Cell kit (Merck Millipore, Germany) according to the manufacturer’s instructions. Briefly, PC-12 cells were seeded in 12-well culture plates at cell density of per well and maintained in 5% CO2 incubator at 37°C for 24 h. PC-12 cells were treated with various concentrations of UDCA-PA nanospheres (1, 5, 10, 25, and 50 μg/mL) with or without glutamate for 24 h. After adding the UDCA-PA nanospheres, the plates were further incubated for another 24 h and then washed twice with cold PBS. Trypsin was used to dissociate the PC-12 cells from the 12-well plates, then 100 μL fresh medium was added to each tube. 100 μL of the Muse™ Annexin V & Dead Cell reagent was added to each tube mix thoroughly by vortexing at a medium speed for 3 to 5 sec. Samples were incubated at room temperature for 20 min. The samples were determined by the Muse Cell Analyzer. Samples were analyzed with the aid of a Muse cell analyzer (Merck Millipore, Germany). Using Muse Cell Analyzer, live, early apoptotic, late apoptotic, debris, and total apoptotic cells of each group at indicated concentrations of the UDCA-PA nanospheres were evaluated.

2.12. Immunofluorescence Assay

The expression of apoptosis-related protein such as caspase-3 was determined using an immunofluorescence assay. Coverslips in 12-well plates were coated by poly-L-lysine. Briefly, PC-12 cells were seeded in 12-well culture plates at cell density of per well and maintained in 5% CO2 incubator at 37°C for 12 h. PC-12 cells were treated with various concentrations of UDCA-PA nanospheres (1, 5, 10, 25 and 50 μg/mL) with or without glutamate for 24 h. After adding the UDCA-PA nanospheres, the plates were further incubated for another 24 h and then washed twice with cold PBS. After being fixed in 4% paraformaldehyde at 4°C for 1 h, cells were then permeabilized with 1% Triton X-100 for 1 h and blocked with 5% BSA at 4°C for 1 h. Cells were incubated with primary antibody (anti-rabbit caspase-3; Sigma-Aldrich, MO, USA) in blocking solution at room temperature (RT) for 1 h, stained with secondary antibody (FITC-conjugated anti-rabbit IgG) for 1 h (light protected), and then washed twice with cold PBS. Finally, the coverslips were rinsed with distilled water and mounted with the cells facing down on the glass slides. Cells were observed using LSM 510 confocal laser scan microscope (Zeiss, Inc., USA) and E800 epifluorescence microscopic (Nikon, Inc., Japan).

2.13. Western Blot

Briefly, PC-12 cells were seeded in 100 Ø cell culture dish at cell density of per well and maintained in 5% CO2 incubator at 37°C for 24 h. PC-12 cells were cotreated at the UDCA-PA nanospheres (1 and 5 μg/mL) with or without glutamate 2~10 mM for 24 h. After adding the UDCA-PA nanospheres, the plates were further incubated for another 24 h and then washed twice with cold PBS. Protein was collected by lysing the cells in 100 μL of ice cold PRO-PREPTM buffer (iNtRON, Seongnam, Korea). The protein concentration of supernatant was evaluated with BCA protein assay kit (Thermo Scientific, South Logan, UT, USA). Total proteins (10 μg) were separated by 15% SDS–PAGE and blotted onto a transferred polyvinylidene fluoride (PVDF) membrane. The membranes were blocked with 5% skin milk at RT for 4 h and then incubated with rabbit primary antibodies to cleaved caspase-3 (1 : 1,000 each) and at 4°C for 12 h. The membranes were washed with Tris-buffered saline containing 0.1% Tween 20 (T/TBS) for 10 min three times and then incubated with HRP-conjugated anti-rabbit IgG secondary antibodies (1 : 1,000 each) at RT for 2 h. After three-time wash in T/TBS, bands were developed using chemiluminescence detection kit (Thermo Scientific, South Logan, UT, USA).

3. Results and Discussion

3.1. Synthesis and Characterization of PA

As shown in Scheme 1, pullulan was first replacing the hydroxyl groups in the glucose unit with acetate groups with acetic anhydride, pyridine, and formamide in order to prepare PA as an amphiphilic polymer. The degree of substitution with acetate can be tuned by changing the ratio between acetic anhydride and glucose unit. Figure 1 shows FT-IR spectra of (a) pullulan, (b) PA, (c) UDCA, and (d) UDCA-loaded PA nanoparticles. FT-IR spectra of pure pullulan show the following characteristic bands: 1077 cm−1 (C-OH stretching), 1454 cm−1 (CH stretching), and 2929 cm−1 (C-H stretching). The weak bands observed near 926 cm−1 and 760 cm−1 are α anomers of pyranose compounds. The broad absorption peak at 3600–3000 cm−1 can be assigned to OH stretching and intrahydrogen bonds. From IR spectra of pullulan acetate, the stretching vibration of hydroxyl group at ca. 3300 cm−1 converted weak, and the peak at 1747 cm−1 characteristic indicative of carbonyl group of an ester group increased because the degree of substitution (DS) of the acetyl group increased CH3 deformation at 1367 cm−1, C-O stretching at 1250 cm−1, presence of O-C=O bonds at 1020 cm−1, CH2 deformation at 752 cm−1, and C-O stretching at 610 cm−1. Acetylated glycosides have a band because the acetyl C=O stretching vibration appeared at 1747 cm−1, which is not observed for the nonacetylated compounds. In addition, the nonacetylated glycosides exhibit a band at 3600–3000 cm−1 due to the OH stretching vibration which is not observed in the acetylated form. By comparing the FT-IR spectrum of pullulan and pullulan acetate, the successful synthesis of the pullulan acetate was verified. The UDCA obviously has broad absorption peaks at 3300–3500 cm−1 and sharp peaks at 2800–3000 cm−1 and 1715 cm−1, which can be allocated to (O-H) stretching vibrations, (C-H) and (C=O) ones. The peak at 1450 cm−1 is due to the mixture of C-O stretching and O-H deformation vibration of carboxylic acid. The CAC performance of PA nanoparticles in an aqueous phase was calculated by evaluating the excitation spectra of fixed concentration of pyrene with various concentrations of PA nanoparticles as shown in Figure 2(a). The characteristic peak of excitation spectra of pyrene shifts from 334 to 337 nm due to the incorporation of pyrene in aqueous phase to the less polar inner core. Figure 2(b) shows the intensity ratios versus logarithm of the concentration of PA nanoparticles. The CAC value can be calculated from the intersection of two straight lines. The CAC value is 21.6 mg/L for PA nanoparticles.

Figures 3(a) and 3(b) show TEM images of synthesized UDCA-PA nanoparticles dispersed on a carbon coated copper grid and negatively stained with 1% (w/v) uranyl acetate solution. Most of the UDCA-loaded PA nanoparticles were of spherical shape with a mean diameter of 98 nm (Figure 3(c)). Figure 3(d) shows zeta potential analysis of UDCA-PA nanospheres. The zeta potential of UDCA-PA nanospheres is negative with a value of 28 mV at .

The UDCA loading efficiency of the PA nanoparticles was found to be around 93%. In order to investigate the stability of FITC-UDCA-loaded PA nanoparticles from the aqueous media, the release profile of FITC-UDCA from nanoparticles was measured in PBS. Results from Figure 4 showed that the release of FITC-UDCA from nanoparticles increased with time with 75% of FITC-UDCA released in 5 h, while only 35% of the drug was released in initial 2 h.

3.2. Protective Effects of the UDCA-PA Nanospheres against Glutamate-Induced Excitotoxicity in PC-12 Cells

PC-12 cells were used to compare the neuroprotective effect of UDCA compound alone and encapsulated UDCA in PA (UDCA-PA) nanospheres. The cytotoxicity of PC-12 cells was measured by varying the glutamate concentration in the range of 2–10 mM. Glutamate treatment induces a significant decrease of cell viability in PC-12 cells with dose-dependent tendency. The MTT assay showed that 6 mM glutamate (Figure 5(a)) was the IC50. Therefore, consequent experiments were performed using 6 mM glutamate. Cell viability of PC-12 cells was estimated after treating with UDCA (1–200 μg/mL) alone and UDCA-loaded PA nanospheres (1–50 μg/mL) alone (Figures 5(b) and 5(c)). The MTT assay results are shown in Figure 5(d), glutamate-induced cytotoxicity significantly attenuated by UDCA-PA nanospheres pretreatment dose-dependently. Moreover, the result implies that no cytotoxicity was added in the material itself or in the process after encapsulating UDCA in pullulan acetate.

3.3. Antiapoptosis Effect of the UDCA-PA Nanospheres against Glutamate-Induced Apoptosis in PC-12 Cells

To quantitatively demonstrate the antiapoptosis effect of the UDCA-PA nanospheres against glutamate-induced apoptosis, Annexin V binding assay was performed by MuseTM cell analyzer. Figure 6 shows the apoptosis of control group, glutamate only treated group, and PC-12 cells treated with various concentrations of UDCA-PA nanospheres (1, 5, 10, 25, and 50 μg/mL) with or without glutamate (Figure 6(a)). The neuroprotective mechanism of the UDCA-PA nanospheres was shown to be involved in the mitochondrial-mediated apoptotic pathway; the expressions of apoptosis-related proteins such as caspase-3 were analyzed by western blot (Figure 6(b)). From the results, caspase-3 was significantly activated in PC-12 cells treated with 6 mM of glutamate compared to control group. The cleaved caspase-3 protein in UDCA-PA nanospheres (1 μg/mL and 5 μg/mL) treated alone was significantly decreased compared to the control group. These results suggested that UDCA-PA nanospheres inhibited glutamate-induced apoptosis by downregulating cleaved caspase-3 protein. The effect of UDCA-PA nanospheres on glutamate-induced cell death characteristics, such as nuclease morphology changes, expression, and translocation of caspase-3 in PC12 cells, was investigated using a confocal microscopy (Figure 7). PC-12 cells normally grow as clumped colonies in plastic flasks and adhesion and disperse as a monolayer over time. From the results, caspase-3 expression was significantly increased in cells treated with 6 mM glutamate more than in the control group. After cells were cotreated with 1 and 5 μg/mL UDCA-PA nanospheres and exposure to glutamate for 24 h, the caspase-3 expression was increased in them more than in the control group. In addition, in the UDCA-PA nanospheres (1 and 5 μg/mL) only treated PC-12 cells, the caspase-3 expression was significantly decreased in a dose-dependent manner.

The amphiphilic PA is composed of two different moieties, that is, hydrophilic compartment of pullulan and hydrophobic part of acetate. Thus, those amphiphilic behaviors of PA in water are investigated. Pyrene is used as an effective fluorescent probe because it has numerous advantageous physicochemical properties such as long life time and efficient formation of excimers. Fluorescence intensity is maintained at a definite concentration but higher than this concentration increases as a function of the logarithm of the amphipathic polymer concentration. At this critical boundary concentration, is called CAC, micelles are produced in an aqueous medium and pyrene forms an aqueous phase in the aqueous phase and a less polar micelle region. Aside from particle diameter, their inherent surface characteristics, such as surface charge, functional groups, and hydrophobicity, determine the degree of opsonization, which eventually influences the biodistribution of the UDCA-PA nanospheres. Hydrated PVA layers on the surface of the UDCA-PA nanospheres created steric hindrance, which resulted in a highly stable colloidal suspension. Apart from the particle diameter of the UDCA-PA nanospheres, their intrinsic surface characteristics, such as surface charge, functional groups, and hydrophobicity, also determine the quantity of opsonization, influencing the biodistribution of the UDCA-PA nanospheres. Generally, UDCA is known as nontoxic compound and cytotoxicity tests exhibited no meaningful difference in cell viability between 10 and 200 ug/ml. These results suggest that the UDCA-PA nanospheres less than 50 μg/mL had no cytotoxicity on PC-12 cells. When treated with 6 mM glutamate, the cell viability was about 50% against control group. It is known that 80% of the cell deaths by apoptosis are caused by glutamate-induced cerebral ischemia. As a result, pretreatment with UDCA-PA nanospheres significantly inhibited that apoptosis, which accounts for most of the cell death, resulting in approximately 30% increase of viability in comparison to the cells treated with glutamate alone. Therefore, additional experiments were conducted to determine the effect of UDCA-PA against glutamate-induced cytotoxicity. When PC-12 cells were treated with 1~50 ug/mL UDCA-PA nanospheres, there was no specific change in cell viability and those results are similar to MTT assay. PC-12 cells treated with UDCA-PA nanospheres without glutamate implies that apoptosis was not induced. PC-12 cells treated with 6 mM glutamate have increased apoptosis rate compared to the control group, and apoptosis rate was decreased when 1~50 ug/mL UDCA-PA was administered compared to glutamate-treated group. This result implies that administration of UDCA-PA nanospheres at least reduces the rate of apoptosis in ischemia at the cellular level. This is similar to the effect of UDCA shown in other studies, indicating that UDCA-PA is effective in ischemia and that the new DDS does not alter the efficacy. The activation of caspase cascade is a critical step in the apoptotic cell death pathways.

4. Conclusions

The glutamate-induced cytotoxicity significantly was attenuated by UDCA-PA nanospheres pretreatment dose-dependently. Moreover, the result implies that no cytotoxicity was added in the material itself or in the process after encapsulating UDCA in pullulan acetate. When PC-12 cells were treated with 1~50 ug/mL UDCA-PA nanospheres, there was no specific change in cell viability and those results are similar to MTT assay. The neuroprotective mechanism of the UDCA-PA nanospheres was shown to be involved in the mitochondrial-mediated apoptotic pathway, and the expressions of apoptosis-related proteins such as caspase-3 were analyzed. Based on the results, caspase-3 was significantly activated in PC-12 cells treated with 6 mM of glutamate compared to control group. Therefore, this study suggested that the UDCA-PA nanospheres have potential therapeutic effect on experimental animal model of cerebral ischemia.

Conflicts of Interest

The authors declare that they have no known conflicts of interest associated with this publication and there has been no competing financial interest for this work that could have influenced its outcome.

Acknowledgments

This research is financially supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (Grant no. NRF-2017R1A2B4005167) and Konyang University Myunggok Research Fund.