Tailoring the Localization of Carbon Nanotubes and Ammonium Polyphosphate in Linear Low-Density Polyethylene/Nylon-6 Blends for Optimizing Their Flame Retardancy

<div>Heat release rate curves (a) and smoke production rate curves (b) of LLDPE/PA6/APP and LLDPE/PA6/APP/CNTs prepared by different processing methods.</div>

Journal of Nanomaterials

fig10

Figure 10

Figure 10: Tailoring the Localization of Carbon Nanotubes and Ammonium Polyphosphate in Linear Low-Density Polyethylene/Nylon-6 Blends for Optimizing Their Flame Retardancy 

Figure 10 | Tailoring the Localization of Carbon Nanotubes and Ammonium Polyphosphate in Linear Low-Density Polyethylene/Nylon-6 Blends for Optimizing Their Flame Retardancy 