About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [14,191 citations: 201–300 of 12,759 articles]

Articles published in Journal of Nanomaterials have been cited 14,191 times. The following is a list of the 12,759 articles that have cited the articles published in Journal of Nanomaterials.

  • Seyedeh Sara Shafiei, Mahnaz Shavandi, Ghasem Ahangari, and Fatemeh Shokrolahi, “Electrospun layered double hydroxide/poly (ε-caprolactone) nanocomposite scaffolds for adipogenic differentiation of adipose-derived mesenchymal stem cells,” Applied Clay Science, vol. 127-128, pp. 52–63, 2016. View at Publisher · View at Google Scholar
  • Liang Chen, Chun Hui Zhou, Saverio Fiore, Dong Shen Tong, Hao Zhang, Chun Sheng Li, Sheng Fu Ji, and Wei Hua Yu, “Functional magnetic nanoparticle/clay mineral nanocomposites: preparation, magnetism and versatile applications,” Applied Clay Science, 2016. View at Publisher · View at Google Scholar
  • Lin Fang, Ran Hong, Juan Gao, and Cheng Gu, “Degradation of bisphenol A by nano-sized manganese dioxide synthesized using montmorillonite as templates,” Applied Clay Science, 2016. View at Publisher · View at Google Scholar
  • M.R. Vengatesan, S. Singh, S. Stephen, K. Prasanna, C.W. Lee, and V. Mittal, “Facile synthesis of thermally reduced graphene oxide-sepiolite nanohybrid via intercalation and thermal reduction method,” Applied Clay Science, 2016. View at Publisher · View at Google Scholar
  • R. Ben-Mansour, M.A. Habib, O.E. Bamidele, M. Basha, N.A.A. Qasem, A. Peedikakkal, T. Laoui, and M. Ali, “Carbon capture by physical adsorption: Materials, experimental investigations and numerical modeling and simulations – A review,” Applied Energy, vol. 161, pp. 225–255, 2016. View at Publisher · View at Google Scholar
  • Seung Yeop Myong, and Sang Won Jeon, “Efficient outdoor performance of esthetic bifacial a-Si:H semi-transparent PV modules,” Applied Energy, vol. 164, pp. 312–320, 2016. View at Publisher · View at Google Scholar
  • Ahmed A. Hussien, Mohd Z. Abdullah, and Moh’d A. Al-Nimr, “Single-phase heat transfer enhancement in micro/minichannels using nanofluids: Theory and applications,” Applied Energy, vol. 164, pp. 733–755, 2016. View at Publisher · View at Google Scholar
  • Pei Zhai, Jacqueline A. Isaacs, and Matthew J. Eckelman, “Net energy benefits of carbon nanotube applications,” Applied Energy, vol. 173, pp. 624–634, 2016. View at Publisher · View at Google Scholar
  • Jerry Chun-Wei Lin, Wensheng Gan, and Tzung-Pei Hong, “Maintaining the discovered high-utility itemsets with transaction modification,” Applied Intelligence, vol. 44, no. 1, pp. 166–178, 2016. View at Publisher · View at Google Scholar
  • Tae Jung Park, Kyoung G. Lee, and Sang Yup Lee, “Advances in microbial biosynthesis of metal nanoparticles,” Applied Microbiology And Biotechnology, vol. 100, no. 2, pp. 521–534, 2016. View at Publisher · View at Google Scholar
  • Sweety A. Wadhwani, Utkarsha U. Shedbalkar, Richa Singh, and Balu A. Chopade, “Biogenic selenium nanoparticles: current status and future prospects,” Applied Microbiology and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • Deena Titus, E. James Jebaseelan Samuel, and Selvaraj Mohana Roopan, “Current scenario of biomedical aspect of metal-based nanoparticles on gel dosimetry,” Applied Microbiology And Biotechnology, vol. 100, no. 11, pp. 4803–4816, 2016. View at Publisher · View at Google Scholar
  • Nelson Durán, Gerson Nakazato, and Amedea B. Seabra, “Antimicrobial activity of biogenic silver nanoparticles, and silver chloride nanoparticles: an overview and comments,” Applied Microbiology and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • Subash C. B. Gopinath, Thangavel Lakshmipriya, Yeng Chen, M. K. Md Arshad, Jesinda P. Kerishnan, A. R. Ruslinda, Yarub Al-Douri, C. H. Voon, and Uda Hashim, “Cell-targeting aptamers act as intracellular delivery vehicles,” Applied Microbiology and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • K. Hemalatha, and G. Madhumitha, “Inhibition of poly(adenosine diphosphate-ribose) polymerase using quinazolinone nucleus,” Applied Microbiology and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • Antony V. Samrot, Akanksha, Tatipamula Jahnavi, S. Padmanaban, Sheryl-Ann Philip, Ujjala Burman, and Arul Maximus Rabel, “Chelators influenced synthesis of chitosan–carboxymethyl cellulose microparticles for controlled drug delivery,” Applied Nanoscience, 2016. View at Publisher · View at Google Scholar
  • R. D. Vengrenovich, B. V. Ivanskii, I. I. Panko, and V. I. Kryvetskii, “Ostwald’s ripening of single-layer carbon nanotubes,” Applied Optics, vol. 55, no. 12, pp. B4, 2016. View at Publisher · View at Google Scholar
  • Basheer A. Alshammari, and Arthur Wilkinson, “Impact of carbon nanotubes addition on electrical, thermal, morphological, and tensile properties of poly (ethylene terephthalate),” Applied Petrochemical Research, 2016. View at Publisher · View at Google Scholar
  • Rawnaq A. Talib, M. J. Abdullah, Naser M. Ahmed, Sabah M. Mohammad, and M. Bououdina, “UV sensing of twinned ZnO–PANI composite,” Applied Physics A, vol. 122, no. 5, 2016. View at Publisher · View at Google Scholar
  • Arun Kumar Gupta, Pankaj Srivastava, and Lal Bahadur, “Improved performance of Ag-doped TiO2 synthesized by modified sol–gel method as photoanode of dye-sensitized solar cell,” Applied Physics A, vol. 122, no. 8, 2016. View at Publisher · View at Google Scholar
  • Ali Abu Odeh, Y. Al-Douri, R. M. Ayub, M. Ameri, A. Bouhemadou, Deo Prakash, and K. D. Verma, “Optical analysis of lens-like Cu2CdSnS4 quaternary alloy nanostructures,” Applied Physics A, vol. 122, no. 10, 2016. View at Publisher · View at Google Scholar
  • E. Ksinopoulou, A. Bakolas, and A. Moropoulou, “Modifying Si-based consolidants through the addition of colloidal nano-particles,” Applied Physics A, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • M. S. E. Hamroun, L. Guerbous, and A. Bensafi, “Luminescent spectroscopy and structural properties of Ce3+-doped low-temperature X1–Y2SiO5 material prepared by polymer-assisted sol–gel method,” Applied Physics A, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Veera M. Boddu, and Matthew W. Brenner, “Energy dissipation in intercalated carbon nanotube forests with metal layers,” Applied Physics A-Materials Science & Processing, vol. 122, no. 2, 2016. View at Publisher · View at Google Scholar
  • Majid Ghadiri, Mahdi Soltanpour, Ali Yazdi, and Mohsen Safi, “Studying the influence of surface effects on vibration behavior of size-dependent cracked FG Timoshenko nanobeam considering nonlocal elasticity and e,” Applied Physics A-Materials Science & Processing, vol. 122, no. 5, 2016. View at Publisher · View at Google Scholar
  • Sonu Hooda, S. A. Khan, B. Satpati, D. Stange, D. Buca, M. Bala, C. Pannu, D. Kanjilal, and Debdulal Kabiraj, “Effect of ion beam parameters on engineering of nanoscale voids and their stability under post-growth annealing,” Applied Physics A-Materials Science & Processing, vol. 122, no. 3, 2016. View at Publisher · View at Google Scholar
  • Poulami Ghosh, and Ashwini K. Sharma, “Pulsed laser deposition and characterization of ZnO nanopores,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Zhaoguo Qiu, Hongya Yu, Zhongwu Liu, Dechang Zeng, and J. Ping Liu, “Effects of TiN intermediate layer on microstructure and magnetic anisotropy of FePt thin films,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Feroz A. Mir, and Khalid Mujasam Batoo, “Effect of Ni and Au ion irradiations on structural and optical properties of nanocrystalline Sb-doped SnO2 thin films,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Ivan G. Samatov, Bjarke R. Jeppesen, Arne Nylandsted Larsen, and Sanjay K. Ram, “Room-temperature rf-magnetron sputter-deposited W-doped indium oxide: decoupling the influence of W dopant and O vacancies on the film properties,” Applied Physics A-Materials Science & Processing, vol. 122, no. 4, 2016. View at Publisher · View at Google Scholar
  • Koppole Kamakshi, J. P. B. Silva, K. C. Sekhar, Gregory Marslin, J. Agostinho Moreira, O. Conde, A. Almeida, M. Pereira, and M. J. M. Gomes, “Influence of substrate temperature on the properties of pulsed laser deposited silver nanoparticle thin films and their application in SERS detection of bovine serum albumin,” Applied Physics B, vol. 122, no. 5, 2016. View at Publisher · View at Google Scholar
  • Martin Aeschlimann, Tobias Brixner, Alexander Fischer, Matthias Hensen, Bernhard Huber, Deirdre Kilbane, Christian Kramer, Walter Pfeiffer, Martin Piecuch, and Philip Thielen, “Determination of local optical response functions of nanostructures with increasing complexity by using single and coupled Lorentzian oscillator models,” Applied Physics B, vol. 122, no. 7, 2016. View at Publisher · View at Google Scholar
  • Jaap M. H. Kroes, Fabio Pietrucci, Kiran Chikkadi, Cosmin Roman, Christofer Hierold, and Wanda Andreoni, “The response of single-walled carbon nanotubes to NO2 and the search for a long-living adsorbed species,” Applied Physics Letters, vol. 108, no. 3, pp. 033111, 2016. View at Publisher · View at Google Scholar
  • B. Eren, U. Gysin, L. Marot, Th. Glatzel, R. Steiner, and E. Meyer, “Work function of few layer graphene covered nickel thin films measured with Kelvin probe force microscopy,” Applied Physics Letters, vol. 108, no. 4, pp. 041602, 2016. View at Publisher · View at Google Scholar
  • Feifei Lian, Juan P. Llinas, Zuanyi Li, David Estrada, and Eric Pop, “Thermal conductivity of chirality-sorted carbon nanotube networks,” Applied Physics Letters, vol. 108, no. 10, pp. 103101, 2016. View at Publisher · View at Google Scholar
  • Yao Gao, Yi-Jing Sun, and Tong-Yi Zhang, “Highly reliable and efficient atomic force microscopy based bending test for assessing Young's modulus of one-dimensional nanomaterials,” Applied Physics Letters, vol. 108, no. 12, pp. 123104, 2016. View at Publisher · View at Google Scholar
  • Wei Lv, and Asegun Henry, “Phonon transport in amorphous carbon using Green–Kubo modal analysis,” Applied Physics Letters, vol. 108, no. 18, pp. 181905, 2016. View at Publisher · View at Google Scholar
  • Yingwei Wang, Haoran Mu, Xiaohong Li, Jian Yuan, Jiazhang Chen, Si Xiao, Qiaoliang Bao, Yongli Gao, and Jun He, “Observation of large nonlinear responses in a graphene-Bi2Te3 heterostructure at a telecommunication wavelength,” Applied Physics Letters, vol. 108, no. 22, pp. 221901, 2016. View at Publisher · View at Google Scholar
  • A. I. Kovalev, D. L. Wainstein, A. Yu. Rashkovskiy, R. Gago, F. Soldera, and J. L. Endrino, “The confinement of phonon propagation in TiAlN/Ag multilayer coatings with anomalously low heat conductivity,” Applied Physics Letters, vol. 108, no. 22, pp. 223106, 2016. View at Publisher · View at Google Scholar
  • E. M. Sala, G. Stracke, S. Selve, T. Niermann, M. Lehmann, S. Schlichting, F. Nippert, G. Callsen, A. Strittmatter, and D. Bimberg, “Growth and structure of In0.5Ga0.5Sb quantum dots on GaP(001),” Applied Physics Letters, vol. 109, no. 10, pp. 102102, 2016. View at Publisher · View at Google Scholar
  • Ümit H. Kaynar, Israfil Şabikoğlu, Sermin Çam Kaynar, and Meral Eral, “Modeling of thorium (IV) ions adsorption onto a novel adsorbent material silicon dioxide nano-balls using response surface methodology,” Applied Radiation and Isotopes, vol. 115, pp. 280–288, 2016. View at Publisher · View at Google Scholar
  • Yi-Jun Pan, Jia-Horng Lin, and Kun-Chien Chiang, “Biomedical Applications of Antibacterial Nanofiber Mats Made of Electrospinning with Wire Electrodes,” Applied Sciences, vol. 6, no. 2, pp. 46, 2016. View at Publisher · View at Google Scholar
  • Samikannu Kanagesan, Mansor Hashim, Sidek AB Aziz, Ismayadi Ismail, Subramani Tamilselvan, Noorjahan Alitheen, Mallappa Swamy, and Bandaru Purna Chandra Rao, “Evaluation of Antioxidant and Cytotoxicity Activities of Copper Ferrite (CuFe2O4) and Zinc Ferrite (ZnFe2O4) Nanoparticles Synthesized by Sol-Gel Self-Combustion Method,” Applied Sciences, vol. 6, no. 9, pp. 184, 2016. View at Publisher · View at Google Scholar
  • Amirhosein Berendjchi, Ramin Khajavi, Ali Akbar Yousefi, and Mohammad Esmail Yazdanshenas, “Improved continuity of reduced graphene oxide on polyester fabric by use of polypyrrole to achieve a highly electro-conductive and flexible substrate,” Applied Surface Science, vol. 363, pp. 264–272, 2016. View at Publisher · View at Google Scholar
  • M. Spasova, N. Manolova, N. Markova, and I. Rashkov, “Superhydrophobic PVDF and PVDF-HFP nanofibrous mats with antibacterial and anti-biofouling properties,” Applied Surface Science, vol. 363, pp. 363–371, 2016. View at Publisher · View at Google Scholar
  • R.S. Moraes, E. Saito, D.M.G. Leite, M. Massi, and A.S. da Silva Sobrinho, “Optical, electrical and electrochemical evaluation of sputtered platinum counter electrodes for dye sensitized solar cells,” Applied Surface Science, vol. 364, pp. 229–234, 2016. View at Publisher · View at Google Scholar
  • Zilin Ni, Yanjuan Sun, Yuxin Zhang, and Fan Dong, “Fabrication, modification and application of (BiO)2CO3-based photocatalysts: A review,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Petr Vlcak, “The effect of ion irradiation and elevated temperature on the microstructure and the properties of C/W/C/B multilayer coating,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Way Foong Lim, Hock Jin Quah, Qifeng Lu, Yifei Mu, Wan Azli Wan Ismail, Bazura Abdul Rahim, Siti Rahmah Esa, Yeh Yee Kee, Ce Zhou Zhao, Zainuriah Hassan, and Kuan Yew Cheong, “Effects of rapid thermal annealing on structural, chemical, and electrical characteristics of atomic-layer deposited lanthanum doped zirconium dioxide,” Applied Surface Science, vol. 365, pp. 296–305, 2016. View at Publisher · View at Google Scholar
  • Zhe Wang, Mingchao Xing, Wenkan Fang, and Deyi Wu, “One-step synthesis of magnetite core/zirconia shell nanocomposite for high efficiency removal of phosphate from water,” Applied Surface Science, vol. 366, pp. 67–77, 2016. View at Publisher · View at Google Scholar
  • K.M. Praveen, Sabu Thomas, Yves Grohens, Miran Mozetič, Ita Junkar, Gregor Primc, and Marija Gorjanc, “Investigations of plasma induced effects on the surface properties of lignocellulosic natural coir fibres,” Applied Surface Science, vol. 368, pp. 146–156, 2016. View at Publisher · View at Google Scholar
  • Samira Naghdi, Babak Jaleh, and Nima Shahbazi, “Reversible wettability conversion of electrodeposited graphene oxide/titania nanocomposite coating: Investigation of surface structures,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Hamideh Sardarabadi, Seyed Mahmoud Mousavi, and Ehsan Saljoughi, “Removal of 2-propanol from water by pervaporation using poly (vinylidene fluoride) membrane filled with carbon black,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Lijuan Yan, Yaning Yan, Leilei Xu, Rongrong Ma, Fengxian Jiang, and Xiaohong Xu, “Large range localized surface plasmon resonance of Ag nanoparticles films dependent of surface morphology,” Applied Surface Science, vol. 367, pp. 563–568, 2016. View at Publisher · View at Google Scholar
  • Ceren Yilmaz, and Ugur Unal, “Effect of Zn(NO3)2 Concentration in Hydrothermal-Electrochemical Deposition on Morphology and Photoelectrochemical Properties of ZnO Nanorods,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Gi-Hwan Kang, and Sung-Hoon Kim, “Effect of incorporating carbon nanocoils on the efficiency of electromagnetic-wave shielding of carbon-nanomaterial composites,” Applied Surface Science, vol. 380, pp. 114–118, 2016. View at Publisher · View at Google Scholar
  • A. Laszczyńska, J. Winiarski, B. Szczygieł, and I. Szczygieł, “Electrodeposition and characterization of Ni-Mo-ZrO2 composite coatings,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Abdullah M. Al-Hamdi, Mika Sillanpää, Tanujjal Bora, and Joydeep Dutta, “Efficient photocatalytic degradation of phenol in aqueous solution by SnO2:Sb nanoparticles,” Applied Surface Science, vol. 370, pp. 229–236, 2016. View at Publisher · View at Google Scholar
  • Fang-Hsing Wang, and Chiao-Lu Chang, “Effect of substrate temperature on transparent conducting Al and F co-doped ZnO thin films prepared by rf magnetron sputtering,” Applied Surface Science, vol. 370, pp. 83–91, 2016. View at Publisher · View at Google Scholar
  • Vishnu Shankar Dhandapani, Ramesh Subbiah, Elangovan Thangavel, Madhankumar Arumugam, Kwideok Park, Zuhair M. Gasem, Veeravazhuthi Veeraragavan, and Dae-Eun Kim, “Tribological Properties, Corrosion Resistance and Biocompatibility of Magnetron Sputtered Titanium-Amorphous Carbon Coatings,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • S. Jegatheeswaran, S. Selvam, V. Sri Ramkumar, and M. Sundrarajan, “Facile green synthesis of silver doped fluor-hydroxyapatite/β-cyclodextrin nanocomposite in the dual acting fluorine-containing ionic liquid medium for bone substitute applications,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Jiwen Li, Xiaojing Ji, Xian Li, Xianghua Hu, Yanfang Sun, Jingjun Ma, and Gaowei Qiao, “Preparation and photocatalytic degradation performance of Ag3PO4 with a two-step approach,” Applied Surface Science, vol. 372, pp. 30–35, 2016. View at Publisher · View at Google Scholar
  • Nur Kicir, Tunc Tuken, Ozge Erken, Cebrail Gumus, and Yuksel Ufuktepe, “Nanostructured ZnO films in forms of rod, plate and flower: Electrodeposition mechanisms and characterization,” Applied Surface Science, vol. 377, pp. 191–199, 2016. View at Publisher · View at Google Scholar
  • Salma Falah Toosi, Sona Moradi, Marzieh Ebrahimi, and Savvas G. Hatzikiriakos, “Microfabrication of polymeric surfaces with extreme wettability using hot embossing,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Alberto Gomez-Nunez, Pere Roura, Concepcion Lopez, and Anna Vila, “Comparison of the thermal decomposition processes of several aminoalcohol-based ZnO inks with one containing ethanolamine,” Applied Surface Science, vol. 381, pp. 48–53, 2016. View at Publisher · View at Google Scholar
  • Chiara Zanchi, Andrea Lucotti, Matteo Tommasini, Sebastiano Trusso, Ugo de Grazia, Emilio Ciusani, and Paolo M. Ossi, “Laser tailored nanoparticle arrays to detect molecules at dilute concentration,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Reem A. Al-Alawi, Karthik Laxman, Sarim Dastgir, and Joydeep Dutta, “Role of bonding mechanisms during transfer hydrogenation reaction on heterogeneous catalysts of platinum nanoparticles supported on zinc oxide nanorods,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Marek Klein, Joanna Nadolna, Anna Gołąbiewska, Paweł Mazierski, Tomasz Klimczuk, Hynd Remita, and Adriana Zaleska-Medynska, “The effect of metal cluster deposition route on structure and photocatalytic activity of mono- and bimetallic nanoparticles supported on TiO2 by radiolytic method,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • J.K. Tripathi, T.J. Novakowski, and A. Hassanein, “Tuning surface porosity on vanadium surface by low energy He+ ion irradiation,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Yan Liu, Shuyi Li, Shichao Niu, Xiaowen Cao, Zhiwu Han, and Luquan Ren, “Bio-inspired micro-nano structured surface with structural color and anisotropic wettability on Cu substrate,” Applied Surface Science, vol. 379, pp. 230–237, 2016. View at Publisher · View at Google Scholar
  • Zohreh Shahnavaz, Pei Meng Woi, and Yatimah Alias, “Electrochemical sensing of glucose by reduced graphene oxide-zinc ferrospinels,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Abderrahmen Merghni, Dorra Kammoun, Hajer Hentati, Sébastien Janel, Michka Popoff, Frank Lafont, Mahjoub Aouni, and Maha Mastouri, “Quantification of Staphylococcus aureus adhesion forces on various dental restorative materials using atomic force microscopy,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Larbi Filali, Yamina Brahmi, Jamal Dine Sib, Ahmed Bouhekka, Djamel Benlakehal, Yahya Bouizem, Aissa Kebab, and Larbi Chahed, “The effect of amorphous silicon surface hydrogenation on morphology, wettability and its implication on the adsorption of proteins,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Sh. Sohrabnezhad, and A. Seifi, “The green synthesis of Ag/ZnO in montmorillonite with enhanced photocatalytic activity,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Adelaida Huerta-Barberà, Lluís Manel Guia, Oleksii Klymov, Vicente Marín-Borrás, Carmen Martínez-Tomás, Julen Tamayo-Arriola, Alejandro Kurtz, Miguel Montes Bajo, Elias Muñoz, Adrian Hierro, and Vicente Muñoz-Sanjosé, “MOCVD growth of CdO very thin films: Problems and ways of solution,” Applied Surface Science, vol. 385, pp. 209–215, 2016. View at Publisher · View at Google Scholar
  • Rodrigo Balen, Wilian Vidotto de Costa, Jéssica de Lara Andrade, Juliana Francis Piai, Edvani Curti Muniz, Mychelle Vianna Companhoni, Tânia Ueda Nakamura, Sandro Marcio Lima, Luis Humberto da Cunha Andrade, Paulo Rodrigo Stival Bittencourt, Ana Adelina Winkler Hechenleitner, Edgardo Alfonso Gómez Pineda, and Daniela Martins Fernandes, “Structural, Thermal, Optical Properties and Cytotoxicity of PMMA/ZnO Fibers and Films: Potential Application in Tissue Engineering,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Sigiava A. Giamini, Jose Marquez-Velasco, Ilias Sakellis, Polychronis Tsipas, Nikolaos Kelaidis, Dimitra Tsoutsou, Nikolaos Boukos, Vasiliki Kantarelou, Evangelia Xenogiannopoulou, Thanassis Speliotis, Kleopatra Aretouli, George Kordas, and Athanasios Dimoulas, “Experimental investigation of metallic thin film modification of nickel substrates for chemical vapor deposition growth of single layer graphene at low temperature,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Rabia Javed, Muhammad Usman, Saira Tabassum, and Muhammad Zia, “Effect of Capping Agents: Structural, Optical and Biological Properties of ZnO Nanoparticles,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • D.A. Jameel, M. Aziz, J.F. Felix, N. Al Saqri, D Taylor, H Albalawi, H Alghamdi, F. Al Mashary, and M Henini, “Electrical performance of conducting polymer (SPAN) grown on GaAs with different substrate orientations,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • A. Gomez-Martinez, F. Márquez, and C. Morant, “A new approach of the synthesis of SiO2 nanowires by using bulk copper foils as catalyst,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • S. Ait Ali Yahia, L. Hamadou, M.J. Salar-García, A. Kadri, V.M. Ortiz-Martínez, F.J. Hernández-Fernández, A. Pérez de los Rios, and N. Benbrahim, “TiO2 nanotubes as alternative cathode in microbial fuel cells: Effect of annealing treatment on its performance,” Applied Surface Science, vol. 387, pp. 1037–1045, 2016. View at Publisher · View at Google Scholar
  • M.M. Araújo, L.K.R. Silva, J.C. Sczancoski, M.O. Orlandi, E. Longo, A.G.D. Santos, J.L.S. Sá, R.S. Santos, G.E. Luz Jr., and L.S. Cavalcante, “Anatase TiO2 nanocrystals anchored at inside of SBA-15 mesopores and their optical behavior,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Leszek Zaraska, Dominika Gilek, Karolina Gawlak, Marian Jaskuła, and Grzegorz D. Sulka, “Formation of crack-free nanoporous tin oxide layers via simple one-step anodic oxidation in NaOH at low applied voltages,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Dimitre Tz. Dimitrov, Nikolay K. Nikolaev, Karolina I. Papazova, Lyudmila K. Krasteva, Igor A. Pronin, Igor A. Averin, Assya S. Bojinova, Angelina Ts. Georgieva, Nadejda D. Yakushova, Tatyana V. Peshkova, Andrey A. Karmanov, Nina V. Kaneva, and Vyacheslav A. Moshnikov, “Investigation of the electrical and ethanol-vapour sensing properties of the junctions based on ZnO nanostructured thin film doped with copper,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • Sana Ijaz, Muhammad Fahad Ehsan, Muhammad Naeem Ashiq, Nazia Karamat, and Tao He, “Preparation of CdS@CeO2 core/shell composite for photocatalytic reduction of CO2 under visible-light irradiation,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • S. Thambiraj, and D.Ravi Shankaran, “Green synthesis of highly fluorescent carbon quantum dots from sugarcane bagasse pulp,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • D.S. Conceição, D.P. Ferreira, C.A.L. Graça, M.F. Júlio, L.M. Ilharco, A.C. Velosa, P.F. Santos, and L.F. Vieira Ferreira, “Photochemical and photocatalytic evaluation of 1D Titanate/TiO2 based nanomaterials,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • R. Martinez-Cuenca, R. Mondragon, L. Hernandez, C. Segarra, J.C. Jarque, T. Hibiki, and J.E. Julia, “Forced-convective heat-transfer coefficient and pressure drop of water-based nanofluids in a horizontal pipe,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Mehmet Şen, A.Osman Emiroğlu, and M.Bahattin Çelik, “CO and C3H8 oxıdatıon actıvıty of pd/ZnO nanowires/cordıerıte catalyst,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Weijuan Yang, Mingyue Zhou, Chen Deng, Tiao Huang, Junhu Zhou, Zhihua Wang, Jianzhong Liu, and Kefa Cen, “Experiments on n-heptane combustion with two types of catalyst layouts,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Amin Sabaghan, Mojtaba Edalatpour, Mohammad Charjouei Moghadam, Ehsan Roohi, and Hamid Niazmand, “Nanofluid flow and heat transfer in a microchannel with longitudinal vortex generators: two-phase numerical simulation,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Qing Hao, Yue Xiao, and Hongbo Zhao, “Analytical Model for Phonon Transport Analysis of Periodic Bulk Nanoporous Structures,” Applied Thermal Engineering, 2016. View at Publisher · View at Google Scholar
  • Mridul Krishnam, Sujoy Bose, and Chandan Das, “Boron nitride (BN) nanofluids as cooling agent in thermal management system (TMS),” Applied Thermal Engineering, vol. 106, pp. 951–958, 2016. View at Publisher · View at Google Scholar
  • Jin Wuk Lee, Eun-Ji Won, Hye-Min Kang, Dae-Sik Hwang, Duck-Hyun Kim, Rae-Kwon Kim, Su-Jae Lee, and Jae-Seong Lee, “Effects of multi-walled carbon nanotube (MWCNT) on antioxidant depletion, the ERK signaling pathway, and copper bioavailability in the copepod (Tigriopus japonicus),” Aquatic Toxicology, vol. 171, pp. 9–19, 2016. View at Publisher · View at Google Scholar
  • Hongxing Chen, Jinling Cao, Lixia Li, Xing Wu, Ran Bi, Paul L. Klerks, and Lingtian Xie, “Maternal transfer and reproductive effects of Cr(VI) in Japanese medaka (Oryzias latipes) under acute and chronic exposures,” Aquatic Toxicology, vol. 171, pp. 59–68, 2016. View at Publisher · View at Google Scholar
  • V. Iswarya, M. Bhuvaneshwari, N. Chandrasekaran, and Amitava Mukherjee, “Individual and binary toxicity of anatase and rutile nanoparticles towards Ceriodaphnia dubia,” Aquatic Toxicology, vol. 178, pp. 209–221, 2016. View at Publisher · View at Google Scholar
  • Li Fu, Yuhong Zheng, Aiwu Wang, Wen Cai, Bo Deng, and Zhi Zhang, “An Electrochemical Sensor Based on Reduced Graphene Oxide and ZnO Nanorods-Modified Glassy Carbon Electrode for Uric Acid Detection,” Arabian Journal For Science And Engineering, vol. 41, no. 1, pp. 135–141, 2016. View at Publisher · View at Google Scholar
  • Tanvir Manzur, and Nur Yazdani, “Effect of Different Parameters on Properties of Multiwalled Carbon Nanotube-Reinforced Cement Composites,” Arabian Journal for Science and Engineering, 2016. View at Publisher · View at Google Scholar
  • Syed Ismail Ahmad, D. Ravi Kumar, Iizhar Ahmed Syed, Rukhsana Satar, and Shakeel Ahmed Ansari, “Structural, Spectroscopic and Magnetic Study of Nanocrystalline Cerium-Substituted Magnesium Ferrites,” Arabian Journal for Science and Engineering, 2016. View at Publisher · View at Google Scholar
  • Moataz M. Mekawy, “Fabrication and characterization of mesoporous silica nanochannels inside the channels of anodic alumina membrane,” Arabian Journal Of Chemistry, vol. 9, no. 2, pp. 269–273, 2016. View at Publisher · View at Google Scholar