Editorial Board
Associate Editors
- Ilaria Armentano, Department of Ecological and Biological Sciences, University of Tuscia, Italy
- Stefano Bellucci
, INFN, Laboratori Nazionali Di Frascati, Italy - Victor M. Castaño, Universidad Nacional Autonoma de Mexico, Mexico
- Paulo Cesar Morais, Universidade de Brasilia, Brazil
- William Yu, Louisiana State University , USA
Academic Editors
- Domenico Acierno, Università degli Studi di Napoli Federico II, Italy
- Katerina Aifantis, University of Florida, USA
- Ibrahim Alarifi, Department of Mechanical and Industrial Engineering College of Engineering Majmaah University, Saudi Arabia
- Nageh K. Allam, Massachusetts Institute of Technology, USA
- Martin Andersson, Chalmers Tekniska Hogskola, Sweden
- Raul Arenal, Universidad de Zaragoza, Spain
- Hassan Azzazy, The American University In Cairo, Egypt
- Vincenzo Baglio, Istituto di Tecnologie Avanzate per l'Energia, Italy
- Lavinia Balan, Institut de Science des Matériaux de Mulhouse, France
- Thierry Baron, Centre National de Recherche Scientifique, France
- Andrew R. Barron, Rice University, USA
- Enrico Bergamaschi, University of Turin, Italy
- Debes Bhattacharyya, University of Auckland, New Zealand
- Sergio Bietti, Universita degli Studi di Milano - Bicocca, Italy
- Raghvendra A. Bohara, D. Y. Patil Univeristy, India
- Mohamed Bououdina, Department of Physics College of Science University of Bahrain, Bahrain
- Albano Cavaleiro, University of Coimbra, Portugal
- Bhanu P. S. Chauhan, William Paterson University, USA
- Shafiul Chowdhury, University of Alabama at Birmingham, USA
- Yu-Lun Chueh, National Tsing Hua University, Taiwan
- Elisabetta Comini, University of Brescia, Italy
- Giuseppe Compagnini, Dipartimento di Scienze Chimiche, Università di Catania, Italy
- David Cornu, Ecole Nationale Supérieure de Chimie de Montpellier, France
- Miguel A. Correa-Duarte, Universidade de Vigo, Spain
- P. Davide Cozzoli, Università del Salento, Italy
- Anuja Datta, University of South Florida, USA
- Loretta L. Del Mercato, Consiglio Nazionale delle Ricerche, Italy
- Yong Ding, Georgia Institute of Technology, USA
- Yu Dong, Curtin Univesity, Australia
- Zehra Durmus, Bezmialem Vakif University, Turkey
- Ovidiu Ersen, Université de Strasbourg, France
- Ana Espinosa, Universite Paris 7- Denis Diderot, France
- Claude Estournès, Université Paul Sabatier Toulouse III, France
- Giuliana Faggio, University "Mediterranea" of Reggio Calabria, Italy
- Andrea Falqui, King Abdullah University of Science and Technology, Saudi Arabia
- Matteo Ferroni, University of Brescia, Italy
- Ilaria Fratoddi, Università degli Studi di Roma "La Sapienza", Italy
- Siddhartha Ghosh, National University of Singapore, Singapore
- Filippo Giubileo, CNR-SPIN Salerno, Italy
- Fabien Grasset, UMI 3629 Laboratory for Innovative Key Materials and Structures–LINK, Japan
- Jean M. Greneche, Université du Maine, France
- Kimberly Hamad-Schifferli, University of Massachusetts Boston, USA
- Simo-Pekka Hannula, Aalto University, Finland
- Michael Harris, Purdue University, USA
- Yasuhiko Hayashi, Okayama University, Japan
- Michael Z. Hu, Oak Ridge National Laboratory, USA
- Zafar Iqbal, New Jersey Institute of Technology, USA
- Balachandran Jeyadevan, University of Shiga Prefecture , Japan
- Hassan Karimi-Maleh, Graduate University of Advanced Technology, Iran
- Antonios Kelarakis, University of Central Lancashire, United Kingdom
- Ali Khorsand Zak, Esfarayen University of Technology, Iran
- Philippe Knauth, Aix-Marseille Université , France
- Prashant Kumar, University of Surrey, United Kingdom
- Eric Le Bourhis, Université de Poitiers, France
- Meiyong Liao, National Institute for Materials Science, Japan
- Shijun Liao, South China University of Technology, China, China
- Silvia Licoccia, Università degli Studi di Roma Tor Vergata, Italy
- Nathan C. Lindquist, Bethel University, USA
- Zainovia Lockman, Universiti Sains Malaysia, Malaysia
- Jim Low, Curtin University, Australia
- Gaurav Mago, Lubrizol Corporation, USA
- Muhamamd A. Malik, The University of Manchester, United Kingdom
- Ivan Marri, Consiglio Nazionale delle Ricerche, Italy
- Laura Martinez Maestro, The University of Salford, United Kingdom
- Sanjay R. Mathur, University of Cologne, Germany
- Tony McNally, University of Warwick, United Kingdom
- Yogendra Mishra, Christian-Albrechts-Universität zu Kiel, Germany
- Paul Munroe, University of New South Wales, Australia
- Jae-Min Myoung, Yonsei University, Republic of Korea
- Rajesh R. Naik, The Henry M. Jackson Foundation for the Advancement of Military Medicine, USA
- Albert Nasibulin, Skolkovo Institute of Science and Technology, Russia
- Toshiaki Natsuki, Shinshu University, Japan
- Hiromasa Nishikiori, Shinshu University, Japan
- Sherine Obare, Western Michigan University, USA
- Won-Chun Oh, Hanseo University, Republic of Korea
- Abdelwahab Omri, Laurentian University, Canada
- Ungyu Paik, Hanyang University, Republic of Korea
- Dillip K. Panda, Clemson University, USA
- Mazeyar Parvinzadeh Gashti, Research and Development Laboratory, PRE Labs Inc., Canada
- Edward A. Payzant, Oak Ridge National Laboratory, USA
- Alessandro Pegoretti, Universitá di Trento, Italy
- Oscar Perales-Pérez, University of Puerto Rico at Mayaguez, Puerto Rico
- Jorge Pérez-Juste, Universidad de Vigo, Spain
- Alexey P. Popov, University of Oulu, Finland
- Thathan Premkumar, Sungkyunkwan University , Republic of Korea
- Helena Prima-García, Universitat de Valencia, Spain
- Alexander Pyatenko, National Institute of Advanced Industrial Science and Technology, Japan
- Haisheng Qian, Anhui Medical University, China
- You Qiang, University of Idaho, USA
- Philip D. Rack, University of Tennessee at Knoxville, USA
- Mohammad Rahimi-Gorji, Ghent University, Belgium
- Ilker S. Bayer, Italian Institute of Technology, Italy
- Lucien Saviot, Université de Bourgogne, France
- Shu Seki, Kyoto University, Japan
- Gaurav Sharma, Shoolni University, Solan, India
- Donglu Shi, The Materials Science and Engineering Program, Department of Mechanical and Materials Engineering, College of Engineering and Applied Science, University of Cincinnati, USA
- Bhanu P. Singh, National Physical Laboratory, India
- Surinder Singh, University of Puerto Rico, USA
- Vladimir Sivakov, Institut für Photonische Technologien, Germany
- Adolfo Speghini, Università di Verona, Italy
- Kishore Sridharan, University of Calicut, India
- Marinella Striccoli, Consiglio Nazionale delle Ricerche, Italy
- Andreas Stylianou, University of Cyprus, Cyprus
- Fengqiang Sun, South China Normal University, China
- Ashok K. Sundramoorthy, SRM University, India
- Angelo Taglietti, Università di Pavia, Italy
- Bo Tan, Ryerson University, Canada
- Leander Tapfer, Italian National Agency for New Technologies, Italy
- Valeri P. Tolstoy, Saint-Petersburg State University, Russia
- Muhammet S. Toprak, Royal Institute of Technology, Sweden
- Sri Ramulu Torati, Daegu Gyeongbuk Institute of Science and Technology, Republic of Korea
- R. Torrecillas, Nanomaterials and Nanotechnology Research Center, Spain
- Achim Trampert, Paul-Drude-Institut für Festköperelektronik, Germany
- Takuya Tsuzuki, Australian National University, Australia
- Tamer Uyar, Cornell University, USA
- Luca Valentini, Università di Perugia, Italy
- Antonio Vassallo, Universita degli Studi della Basilicata, Italy
- Ester Vazquez, Universidad de Castilla-La Mancha, Spain
- Ajayan Vinu, University of Queensland, Australia
- Ruibing Wang, University of Macau, Macau
- Magnus Willander, Linköpings Universitet, Sweden
- Ping Xiao, University of Manchester, United Kingdom
- Zhi Li Xiao, Northern Illinois University, USA
- Yingchao Yang, University of Maine, USA
- Hui Yao, Beijing University of Technology, China
- Yoke K. Yap, Michigan Technological University, USA
- Dong Kee Yi, Myongji University, Republic of Korea
- Jianbo Yin, Northwestern Polytechnical University, China
- Michele Zappalorto, University of Padova, Italy
- Renyun Zhang, Mid Sweden University, Sweden
Journal metricsAcceptance rate49%
Submission to final decision69 days
Acceptance to publication29 days
CiteScore3.200
Impact Factor1.980
Submit
