Journal of Nanomaterials

Nanofiber Manufacture, Properties and Applications


Publishing date
15 Jun 2012
Status
Published
Submission deadline
16 Dec 2011

Lead Editor

1Centre for Material and Fibre Innovation, Deakin University, Geelong, VIC 3220, Australia

2Centre for Nanomaterials, Advanced Technologies, and Innovation, Faculty of Textile Engineering, Technical University of Liberec, 46117 Liberec, Czech Republic

3Nonwovens Research Laboratory, The University of Tennessee, Knoxville, TN 37996, USA


Nanofiber Manufacture, Properties and Applications

Description

Nanofibers have shown enormous potential in widely diverse applications. However, the technology development for large-scale production of nanofibers has been hampered. We invite authors to submit original research and review articles that promote the development of efficient nanofiber manufacture techniques.

We are interested in articles that explore any aspects of large-scale nanofiber production, theory and quality control, and characterization and functional applications of the nanofibers. Potential topics include, but are not limited to:

  • Needleless electrospinning
  • Gas-jacket enhanced electrospinning
  • Bubble electrospinning
  • Centrifuge spinning and centrifuge electrospinning
  • Solution assembly of nanofibers
  • Nanofibers from natural materials
  • Melt-blowing of nanofibers
  • Drawing of nanofibers
  • Other potential large-scale manufacturing techniques
  • Spinning of continuous nanofiber yarns
  • Control of fiber quality and nanofibrous structure
  • Nanofiber mass spinning theory
  • Characterization of nanofibers
  • Functional applications

Before submission authors should carefully read over the journal's Author Guidelines, which are located at http://www.hindawi.com/journals/jnm/guidelines/. Prospective authors should submit an electronic copy of their complete manuscript through the journal Manuscript Tracking System at http://mts.hindawi.com/ according to the following timetable:


Articles

  • Special Issue
  • - Volume 2013
  • - Article ID 368191
  • - Editorial

Nanofiber Manufacture, Properties, and Applications

Tong Lin | David Lukas | Gajanan S. Bhat
  • Special Issue
  • - Volume 2013
  • - Article ID 476585
  • - Research Article

Antibacterial Properties of Titanate Nanofiber Thin Films Formed on a Titanium Plate

Mitsunori Yada | Yuko Inoue | ... | Takao Hotokebuchi
  • Special Issue
  • - Volume 2012
  • - Article ID 624520
  • - Review Article

Synthesis, Characterization, and Applications of ZnO Nanowires

Yangyang Zhang | Manoj K. Ram | ... | D. Yogi Goswami
  • Special Issue
  • - Volume 2012
  • - Article ID 371927
  • - Research Article

Challenges and Benefits of Utilizing Carbon Nanofilaments in Cementitious Materials

Ardavan Yazdanbakhsh | Zachary Grasley | ... | Rashid Abu Al-Rub
  • Special Issue
  • - Volume 2012
  • - Article ID 645624
  • - Research Article

Nanofibrillation of Dry Chitin Powder by Star Burst System

Shinsuke Ifuku | Kiyotaka Yamada | ... | Hiroyuki Saimoto
  • Special Issue
  • - Volume 2012
  • - Article ID 382639
  • - Research Article

Needleless Melt-Electrospinning of Polypropylene Nanofibres

Jian Fang | Li Zhang | ... | Tong Lin
  • Special Issue
  • - Volume 2012
  • - Article ID 491927
  • - Research Article

Electrospinning Preparation and Photocatalytic Activity of Porous TiO2 Nanofibers

Shanhu Liu | Baoshun Liu | ... | Akira Fujishima
  • Special Issue
  • - Volume 2012
  • - Article ID 892894
  • - Research Article

Development of Protective Clothing against Nanoparticle Based on Electrospun Nanofibers

M. Faccini | C. Vaquero | D. Amantia
  • Special Issue
  • - Volume 2012
  • - Article ID 158503
  • - Research Article

Particle Board and Oriented Strand Board Prepared with Nanocellulose-Reinforced Adhesive

Stefan Veigel | Jörn Rathke | ... | Wolfgang Gindl-Altmutter
  • Special Issue
  • - Volume 2012
  • - Article ID 473872
  • - Research Article

Needleless Electrospinning of Polystyrene Fibers with an Oriented Surface Line Texture

Chen Huang | Haitao Niu | ... | Tong Lin
Journal of Nanomaterials
 Journal metrics
Acceptance rate49%
Submission to final decision69 days
Acceptance to publication29 days
CiteScore3.200
Impact Factor1.980
 Submit

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.