Table of Contents Author Guidelines Submit a Manuscript
Journal of Nanotechnology
Volume 2010, Article ID 860178, 9 pages
http://dx.doi.org/10.1155/2010/860178
Research Article

Hybrid Carbon Fibers/Carbon Nanotubes Structures for Next Generation Polymeric Composites

1Department of Mechanical Engineering, University of New Mexico, Albuquerque, NM 87131, USA
2Department of Civil Engineering, University of New Mexico, Albuquerque, NM 87131, USA
3AFRL/RXBT Thermal Sciences and Materials Branch, Wright-Patterson AFB, OH 45433, USA
4Department of Chemical Engineering, Case Western Reserve University, Cleveland, OH 44106, USA
5Los Alamos National Laboratory, Los Alamos, NM 87545, USA

Received 2 July 2009; Revised 18 December 2009; Accepted 2 January 2010

Academic Editor: Quan Wang

Copyright © 2010 M. Al-Haik et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [13 citations]

The following is the list of published articles that have cited the current article.

  • M. Tehrani, M. Safdari, A.Y. Boroujeni, Z. Razavi, S.W. Case, K. Dahmen, H. Garmestani, and M.S. Al-Haik, “Hybrid carbon fiber/carbon nanotube composites for structural damping applications,” Nanotechnology, vol. 24, no. 15, 2013. View at Publisher · View at Google Scholar
  • Suraya Abdul Rashid, Muhammad Zamir Abdul Rashid, Muharniza Azinita Musa, and Siti Hajar Othman, “Assessment of gas flow characteristics and reaction kinetics of chemical vapour deposition reactors for the production of nano-hybrid fibres,” Asia-Pacific Journal Of Chemical Engineering, vol. 8, no. 2, pp. 254–261, 2013. View at Publisher · View at Google Scholar
  • E. G. Rakov, “Carbon nanotubes in new materials,” Russian Chemical Reviews, vol. 82, no. 1, pp. 27–47, 2013. View at Publisher · View at Google Scholar
  • T.R. Pozegic, I. Hamerton, J.V. Anguita, W. Tang, P. Ballocchi, P. Jenkins, and S.R.P. Silva, “Low Temperature Growth of Carbon Nanotubes on Carbon Fibre to Create a Highly Networked Fuzzy Fibre Reinforced Composite with Superior Electrical Conductivity,” Carbon, 2014. View at Publisher · View at Google Scholar
  • A. Y. Boroujeni, M. Tehrani, A. J. Nelson, and M. Al-Haik, “Hybrid carbon nanotube-carbon fiber composites with improved in-plane mechanical properties,” Composites Part B-Engineering, vol. 66, pp. 475–483, 2014. View at Publisher · View at Google Scholar
  • Ehsan Moaseri, Majid Karimi, Morteza Maghrebi, and Majid Baniadam, “Fabrication of multi-walled carbon nanotube-carbon fiber hybrid material via electrophoretic deposition followed by pyrolysis process,” Composites Part A: Applied Science and Manufacturing, 2014. View at Publisher · View at Google Scholar
  • Chetan S. Jarali, Somaraddi R. Basavaraddi, Sharanabasava C. Pilli, S. Raja, and Vilas V. Karjinni, “Modeling The Hygro-Thermo-Mechanical Agglomeration Relations Of Carbon-Epoxy Hybrid Nanocomposites,” International Journal For Multiscale Computational Engineering, vol. 13, no. 3, pp. 231–248, 2015. View at Publisher · View at Google Scholar
  • Mehran Tehrani, Zhixian Zhou, Marwan Al-Haik, Ayoub Y. Boroujeni, and Majid Manteghi, “Electromagnetic Shielding Effectiveness of a Hybrid Carbon Nanotube/Glass Fiber Reinforced Polymer Composite,” Journal of Engineering Materials and Technology, Transactions of the ASME, vol. 138, no. 4, 2016. View at Publisher · View at Google Scholar
  • M. Ahmadi, R. Ansari, and H. Rouhi, “Multi-scale bending, buckling and vibration analyses of carbon fiber/carbon nanotube-reinforced polymer nanocomposite plates with various shapes,” Physica E: Low-dimensional Systems and Nanostructures, vol. 93, pp. 17–25, 2017. View at Publisher · View at Google Scholar
  • M.K. Hassanzadeh-Aghdam, M.J. Mahmoodi, and J. Jamali, “Effect of CNT coating on the overall thermal conductivity of unidirectional polymer hybrid nanocomposites,” International Journal of Heat and Mass Transfer, vol. 124, pp. 190–200, 2018. View at Publisher · View at Google Scholar
  • M. Ahmadi, R. Ansari, and M. K. Hassanzadeh-Aghdam, “Low velocity impact analysis of beams made of short carbon fiber/carbon nanotube-polymer composite: A hierarchical finite element approach,” Mechanics of Advanced Materials and Structures, pp. 1–11, 2018. View at Publisher · View at Google Scholar
  • Liu Liu, Fei Yan, Ming Li, Mengjie Zhang, Linghan Xiao, Lei Shang, and Yuhui Ao, “Improving interfacial properties of hierarchical reinforcement carbon fibers modified by graphene oxide with different bonding types,” Composites Part A: Applied Science and Manufacturing, 2018. View at Publisher · View at Google Scholar
  • Suma Ayyagari, Marwan Al-Haik, and Virginie Rollin, “Mechanical and Electrical Characterization of Carbon Fiber/Bucky Paper/Zinc Oxide Hybrid Composites,” C, vol. 4, no. 1, pp. 6, 2018. View at Publisher · View at Google Scholar