Abstract

Panton-Valentine leukocidin (luk-pv) is a cytotoxin that causes leukocyte destruction and tissue necrosis. The aim of this study was to determine the prevalence of the pv1, mecA, and nuc genes in Staphylococcus aureus isolates obtained from anterior nares and superficial infection sites of skin in a slum population of West Bengal, India. Expression level of pv1 gene was also analysed. Twenty-two S. aureus strains were isolated, and phenotype and genotype specific examinations for S. aureus isolates were carried out. Molecular identification was done by PCR using species-specific 16S rRNA primer pairs and finally 22 isolates were found to be positive as S. aureus. The antibiotic responsiveness of all these isolates and the minimum inhibitory concentration (MIC) of MRSA isolates were determined using the broth dilution method with vancomycin. Antibiogram analysis of isolated S. aureus strains with respect to different antimicrobial agents revealed antibiotic resistance ranging from 27 to 91%. The results of MIC for vancomycin showed 95% of strains to be VSSA and 5% to be VISA. 68% isolates were resistant to methicillin. All the isolates were subjected to detection of pv1, mecA, and nuc genes, and 9%, 68%, and 27% were found to harbour pvl, mecA, and nuc genes, respectively. All the MRSA strains produced high to moderate levels of biofilm. pvl gene expression was carried out in vitro by Real-Time PCR. The low ∆Ct value (0.493) was indicative of high expression of pvl in one S. aureus strain. Thus, detection of pvl gene in community acquired S. aureus indicates the emergence of pathogenic S. aureus in community setup in the studied region. The existing exploration is extremely imperative and informative for the high level multi-drug resistant S. aureus infections inclusive of MRSA.

1. Introduction

To date, the major human pathogen, Staphylococcus aureus, has become a threat to our lives, because of elaboration of several different virulence factors. Panton-Valentine leukocidin (PVL) is one of the most important virulence factors of S. aureus. This beta pore forming cytotoxin is associated with tissue necrosis and also causes disruption of leukocyte membranes [1]. The genetic material of bacteriophage has great contribution for producing PVL cytotoxin. PVL carrying S. aureus strains are more virulent and highly transmissible strains than PVL negative S. aureus. pvl gene that encodes PVL cytotoxin comprises two exoprotein subunits, encoded by LukS-PV and LukF-PV [2, 3]. These two co-transcribed genes act together as a subunit to form a pore by assembling in the cell membranes of host immune cells particularly the white blood cells, monocytes, and macrophages [4]. PVL carrying S. aureus is responsible for different life-threatening invasive diseases, and also skin and soft tissue infections. PVL-SA infected skin is red and inflamed with pus. It can have different other appearances like cellulitis, abscesses, boils, folliculitis, etc. At first, PVL carrying S. aureus infects skin and soft tissues but the infection gradually spreads to the lung and disrupts the lung tissues, causing hemorrhagic necrotizing pneumonia, one of the most lethal diseases caused by S. aureus [5].

In recent time, there have been an overall increase in the prevalence of pvl positive S. aureus worldwide. But variable rates of prevalence have been reported from different countries, i.e., 12.8% in China [6], 30% in Germany [7], 45.3% in Japan, and most remarkably 97% in USA [8].

To date PVL has become most important and significant virulence factor of community acquired S. aureus. The prevalence of pvl genes among MRSA isolates has not been adequately reported from India. This study was undertaken to investigate the PVL prevalence and pvl expression level along with certain other virulent markers from state of West Bengal, India. The study area is demonstrated in Figure 1.

2. Materials and Methods

2.1. Sample Collection

A total of 25 non-repeat community strains of S. aureus were collected from human subjects of different slum areas at Midnapore town (Lat. 22°23′41.57 N to 22°26′22.02 N; Long. 87°17′23.65 E to 87°20′15.35 E) in the state of West Bengal, India, from November 2015 to March 2016. The protocols in present study with human subjects got ethical clearance from Institutional Review Board (IRV) who follows the Indian Council of Medical Research (ICMR) ethical guidelines for biomedical research on human subjects. Bacterial isolates were categorised into three groups according to the site of collection, age group, and sex (Table 1). For sample collection, sterile swabs with rayon tips were used; for moist wound it was used directly but for dry wound it was moistened with sterile saline so that it could increase the chance of recovery of the organism from the infected sites.

2.2. Isolation and Identification of S. aureus

All the samples were transferred into 2 gm% Luria broth (one for each specimen) and incubated at 37°C in shaking incubator. After 16-18 hours all the samples were inoculated onto mannitol salt agar plate and incubated for 24-25 hours at 37°C [14]. All yellow pigmented colonies were inoculated into LB agar for culture preservation at 4°C. The resulting growth from respective plates of media was examined for colony characteristic and morphology. Each culture underwent Gram staining and was tested for production of catalase, free coagulase, yellow pigment, and thermonuclease (TNase) according to method described by Lancette and Tatini [15].

2.3. DNA Extraction from Bacterial Culture Isolates

For extraction of DNA from bacterial culture, the rapid boiling method was followed [14]. In brief, 4 to 5 single colonies from overnight grown culture were inoculated in 200 μl of sterile Milli-Q water and boiled at 99°C for 10 minutes. After centrifugation at 14000 rpm for 10 min, the supernatant was collected in a sterile microcentrifuge tube gently. The resultant template DNA was stored at −20°C and 2 μl of each sample was used for PCR analysis.

2.4. Molecular Identification through PCR Amplification of 16S rRNA Gene

Phenotypically isolated and confirmed S. aureus isolates were further tested by PCR amplification assay using primer pairs (Table 3) for species-specific 16S rRNA gene. These primers amplified 228 bp fragment from 16S rRNA gene of these isolated S. aureus strains. The PCR procedure was carried out in a 25 μl PCR tube and each of the reaction mixtures contained 2.5 μl PCR buffer (10X); 1 μl (1U/μl) of Taq DNA polymerase; 2 μl dNTPs (200 mM each); 1 μl of each primer (10 pmol/μl); 2.5 μl (10 ng/μl) of template DNA; and 15.75 μl PCR grade water. The amplifications took place by the process of PCR thermocycling in a thermal cycler (Eppendorf, Germany) commencing with an initial denaturation at 94°C for 2 minutes followed by 33 cycles, each consisting of denaturation at 94°C for 30 sec, annealing at 50°C for 30 sec, and polymerization at 72°C for 45 sec with a final extension at 72°C for 4 minutes. S. aureus ATCC 25923 was used as positive control in this experiment.

2.5. Biochemical Characterization of S. aureus Strains

The bacterial strains which were confirmed as S. aureus by species-specific 16S rRNA were further evaluated by different biochemical tests including mannitol fermentation and growth on high salt concentration, gelatin hydrolysis, urea hydrolysis, protease activity on milk agar medium, lipase production on egg yolk agar medium (HiMedia, Mumbai), and hydrolysis of esculin by standard method [1619] and congo red agar (CRA) test [20].

2.6. Biofilm Assay

Biofilm assay was done in borosilicate glass tubes according to the method described by Watnick et al. [21]. Briefly, the isolates were grown in 3 ml of Luria broth overnight. Then 5 μl of the overnight culture was added to 500 μl of sterile LB in test tubes to make a dilution of 1:100. Test tubes were kept standing statically for 24 hrs and after that the test tubes were rinsed vigorously with distilled water to remove all nonadherent cells. Further, 600 μl of 0.1% (w/v) crystal violet was added and incubated for 30 minutes. Test tubes were then rinsed vigorously with distilled water. 1 ml DMSO was added to it followed by vortexing. After incubation for 10 minutes optical density was measured at 570 nm. Each assay was performed in triplicate. The mean values of optical densities obtained were categorised into three classes as suggested by Cha et al. [22], such that the strains with OD570< 0.2, 0.2≥ OD570≤1.0, and OD570> 1.0 were defined as biofilm nonformers and biofilm formers of weak level and strong level, respectively.

2.7. Antibiotic Susceptibility Profile of Isolated S. aureus

The antibiotic susceptibility pattern of S. aureus isolates was done by disk diffusion method using commercial antibiotic disks procured from HiMedia, Mumbai [23]. The antibiotic disks used were as follows: ampicillin (30μg), nalidixic acid (30μg), chloramphenicol (30μg), streptomycin (10μg), kanamycin (30μg), cefoxitin (30μg), novobiocin (30μg), and erythromycin (10μg). Antibiotic susceptibility of those isolates was evaluated according to the Clinical and Laboratory Standard Institute (CLSI) [23]. Minimum Inhibitory Concentration (MIC) of vancomycin was done by the broth dilution method to distinguish VSSA from VRSA according to the Clinical and Laboratory Standard Institute (CLSI, 2015) [24].

2.8. Detection of mecA, nuc, and pvl Gene

Detection of mecA, nuc, and pvl genes of S. aureus was done by PCR amplification assay using gene-specific primer pairs (Table 3). The PCR procedure was carried out in a 25 μl PCR tube and each of the reaction mixtures contained: 2.5 μl PCR buffer (10X); 1 μl (1U/μl) of Taq DNA polymerase; 2 μl dNTPs (200 mM each); 1 μl of each primer (10 pmol/μl); 2.5 μl (10 ng/μl) of template DNA; and 15.75 μl PCR grade water. The amplifications took place by the process of PCR thermocycling in a thermal cycler (Eppendorf, Germany), commencing with an initial denaturation at 94°C for 2 minutes followed by 33 cycles, each comprising 94°C for 1 minute and annealing at 55°C for 45 sec, 50°C for 50 sec, and 50°C for 45 sec for mecA, nuc, and pvl gene, respectively, and a common extension of 72°C for 45 sec with a final extension at 72°C for 4 minutes. A positive control of ATCC 33591, ATCC 25923, and ATCC 49775 S. aureus was used, respectively, in each of these experiments. The PCR amplicons were visualized in agarose gel containing ethidium bromide (1 μg/ml) under Gel Doc™XR system (Bio-Rad, USA) and photographs were taken for image analysis. Fragments of DNA 147 bp, 270 bp, and 433 bp corresponded to mecA, nuc, and pvl gene, respectively.

2.9. Real-Time Polymerase Chain Reaction of pvl Gene

Total RNA was extracted using Pure Link™ RNA Mini Kit (Invitrogen, Carlsbad, CA) and quantified using UV-Vis spectrophotometer (Nano Drop 2000, Thermo Fisher). Total RNA was then converted to cDNA by using Verso cDNA synthesis kit (Thermo Scientific, USA). The standard reaction contained 1x Power SYBR Green PCR master mix (Applied Biosystems), primers pairs (Table 3), and cDNA as template strand. The temperature program for 40 cycles was set to denaturation at 94°C for 1 minute and annealing at 55°C for 30 sec. The reaction was conducted on Step One Plus 96-Well Real-Time PCR System (Applied Biosystems). The samples were analysed in triplicate and recA was used as endogenous control for normalization [25].

2.10. Statistical Analysis

Data analysis and plotting of data were done using Microsoft Excel. Mean and standard error of mean was also calculated for each quantitative variable using Microsoft Excel.

3. Results

A total of 25 nonduplicate isolates of S. aureus were obtained from different slum areas in Midnapore town, West Bengal, India, and included in this study. Samples were collected from nasal swab and superficial infection sites of the subjects. Among 25 isolates, 22 strains (88%) were isolated using selective MSA media and then these isolates were identified as S. aureus by several phenotypic expressions by means of different biochemical tests (Table 2). All S. aureus isolates in this study were confirmed by PCR using the species-specific primer pair (Table 3). In this study, we found that 100%, 91%, and 23% isolates were positive for catalase, coagulase, and heat-stable nuclease, respectively. Of the isolated strains, 68%, 55%, and 68% produced protease, lipase, and nonwhite pigmented colonies, respectively. Rates of resistance of S. aureus ranged from 27 to 91% to different antibiotics. Resistance of S. aureus isolates to ampicillin (91%), nalidixic acid (91%), chloramphenicol (36%), streptomycin (27%), kanamycin (55%), cefoxitin (68%), novobiocin (64%), and erythromycin (82%) was found. S. aureus isolates showing resistance to at least one agent from three or more antimicrobial categories is labeled as multi-drug resistant. Accordingly, all S. aureus strains isolated in this study were found to be multi-drug resistant. In the present study, the prevalence rate of MRSA was found to be 68%. It was also found that 5% of the isolated S. aureus were vancomycin intermediate and 95% of the isolated S. aureus were vancomycin sensitive. None of the strains were found to be VRSA. In general observations, slime-producing strains appear as black colonies, whereas non-slime-producing strains appear as red colonies in CRA plates. Among the community acquired isolates, 15 out of 22 (68%) S. aureus strains appeared to be slime-producing after 48 hrs of incubation at 37°C. Moreover, in the present study 7 (32%) were found as strong biofilm forming and 15 (68%) isolates were moderate biofilm forming. None of the isolates were biofilm-negative (Figure 2). Twenty-seven percent (27%) strains were found to harbour nuc gene (Figure 3). mecA and pvl genes were detected in 17 out of 22 (68%) and 2 out of 22 isolates (9%), respectively. All the pvl harbouring isolates possessed mecA gene (Figure 3). The low ∆Ct value (0.493) in qRT-PCR was indicative of high expression of pvl in one S. aureus strain (Figure 4).

4. Discussion

In the present study, very high rates of resistance particularly towards penicillin and also for kanamycin, cefoxitin, novobiocin, and erythromycin were observed in the isolated community acquired S. aureus strains. In 2005, Kazakova et al. [26] reported a community-associated MRSA (CA-MRSA) clone isolated from US football players with skin abscesses. The strain was susceptible to most antimicrobial agents except β-lactams and macrolides. Bhatta et al. [27] reported the detection of mecA gene in 56.8% of the isolates from clinical and community settings. In this study, out of twenty-two clinical isolates, fifteen (68%) isolates turned out to be slime producer. Jain and Agarwal [28] reported a higher rate where 64% of staphylococcal intravascular isolates were biofilm producers by CRA method. Zalipour et al. [29] reported that forty-three (54.4%) biofilm forming strains were found in clinical specimens in Iran by CRA assay. In the current study, seven (32%) isolates were strong biofilm formers and fifteen (68%) isolates were moderate biofilm formers. Mathur et al. [30] reported that 57.8% of staphylococcal clinical isolates established biofilm-positive characteristics, and 14.47% and 39.4% exhibited high and moderate biofilm production, respectively, in India. Global emergence of MRSA is serious public health problem and challenge to clinicians. Various factors devote to drug resistance and the pathogenicity of S. aureus. The first PVL positive MRSA was noticed in the late 1990s and these strains got scattered worldwide in recent years [31]. The role of PVL in boosting virulence of S. aureus and their pathogenicity is being deliberated. Panton-Valentine leukocidin rises the pathogenicity of S. aureus by necrosis, quickening apoptosis and damage of polymorphonuclear and mononuclear cells, thereby contributing to mortality and morbidity [32]. PVL is generally used as a marker for community acquired MRSA, liable for deep dermal infections including soft tissue [33, 34]. However, the worldwide scheme of PVL among MRSA isolates varies. A lower prevalence of PVL has been reported from other parts of world (5% in France, 4.9% in UK, 8.1% in Saudi Arabia, and 14.3% in Bangladesh) [32, 3537] reflecting the significant variation in prevalence of PVL among geographical areas and communities. Kaur et al. [38], from India, have reported overall 62.85% prevalence of PVL among MRSA and MSSA (MRSA: 85.1% and MSSA: 48.8%), which delineates higher prevalence of PVL among MRSA in comparison to present findings. Johnsson et al. [39] detected pvl gene in one isolate (1%) from 65 patients with S. aureus bacteraemia, in two (2.19%) isolates from 91 patients with cutaneous infections, and in four (7.27%) isolates from 55 patients with respiratory tract infections. Rostamzad et al. [40] reported that out of thirty-two MRSA isolates, thirteen isolates (40.62%) were positive for presence of the luk-pv gene from hospitals isolates. Higher prevalence of PVL among children (<14 years of age) was observed as compared to adults and old age group patients. Similar observations were made in another study from India [41]. Epidemiological data suggest that high virulence of community acquired MRSA is associated with pvl gene but direct evidence of association of PVL to pathogenesis remains limited [42]. The low ∆Ct value (0.493) in qRT-PCR indicated high expression of pvl gene in S. aureus strain in the present study. However, in previous study low expression of luk-pv was reported [43]. In S. aureus, expression of toxins and others factors can be measured by using Panton-Valentine leukocidin (PVL) expression in in vivo condition [44]. In addition, expression of pvl gene is enhanced by sub-MIC values of β-lactam antibiotics [45]. The studied population has a little health education and they commonly use β-lactam antibiotics to treat any kind of infections; this may be the reason of high expression of pvl gene in in vitro condition. Thus, detection of pvl gene in community isolated S. aureus is indication of emergence of pathogenic S. aureus in community setup in the studied region.

5. Conclusion

The current study reflects the elevated level of multi-drug resistant S. aureus infections in community. The prevalence of the pvl gene among the MRSA isolates in this study was low. The presence of pvl among multi-drug resistant bacteria like MRSA may be fatal and challenging condition for clinicians. The studied population has a little health education and they commonly use β-lactam antibiotics; this may be the underlying reason for high expression of pvl. Thus, detection of pvl in community isolated S. aureus indicates the emergence of pathogenic S. aureus in community setup in the studied region.

Data Availability

The data used to support the findings of this study are available from the corresponding author upon request.

Conflicts of Interest

The authors declare that there are no conflicts of interest regarding the publication of this paper.

Acknowledgments

The authors are grateful to the individuals who participated in the study.