Research Article
A Preliminary Investigation of Ductility-Enhancement Mechanism through In Situ Nanofibrillation in Thermoplastic Matrix Composites
Table 2
Injection-molding processing parameters.
| | Injection pressure (bar) | 80 | | Injection speed (mm/sec) | 20 | | Holding pressure (bar) | 60 | | Holding time (sec) | 5 | | Cooling time (sec) | 5 | | Back pressure (Bar) | 5 | | Refilling screw speed (%) | 40% (100 rpm) |
|
|
