Research Article
Analysis of Incomplete Filling Defect for Injection-Molded Air Cleaner Cover Using Moldflow Simulation
Table 2
Processing parameters used in the manufacturing and Moldflow simulation.
| Processing parameters | Unit | Manufacturing values | Simulation values |
| Flow rate | cm3/s | 1,000–1200 | 1,000 | Melt temperature |
°C | 230–260 | 230 | Mold temperature |
°C | 40 | Filling/packing | — | Switch over at 98 vol% | Packing profile | — | 80% of maximum pressure | Holding time | s | 10 | Cooling times | s | 20 |
|
|