Table of Contents
Journal of Polymers
Volume 2017, Article ID 8241859, 11 pages
https://doi.org/10.1155/2017/8241859
Research Article

Variation of the Pole Length in Pole-Oriented Bonded Rings due to the Location and Number of Injection Points

Institute of Polymer Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg, Am Weichselgarten 9, 91058 Erlangen, Germany

Correspondence should be addressed to Katharina H. Kurth; ed.negnalre-inu.tkl@htruk

Received 10 November 2016; Revised 12 January 2017; Accepted 17 January 2017; Published 15 February 2017

Academic Editor: Zhong-Ming Li

Copyright © 2017 Katharina H. Kurth and Dietmar Drummer. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Katharina H. Kurth and Dietmar Drummer, “Variation of the Pole Length in Pole-Oriented Bonded Rings due to the Location and Number of Injection Points,” Journal of Polymers, vol. 2017, Article ID 8241859, 11 pages, 2017. https://doi.org/10.1155/2017/8241859.