Table of Contents
Journal of Quality and Reliability Engineering
Volume 2014, Article ID 524742, 13 pages
Research Article

Design for Reliability of Complex System: Case Study of Horizontal Drilling Equipment with Limited Failure Data

1Tabriz University, Tabriz 5166616471, Iran
2Sahand University of Technology, Tabriz 51335-1996, Iran

Received 11 August 2014; Accepted 30 October 2014; Published 30 November 2014

Academic Editor: Antoine Grall

Copyright © 2014 Morteza Soleimani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Mohammad Pourgol-Mohammad, Amirmohsen Hejazi, Morteza Soleimani, Pejman Ghasemi, Alireza Ahmadi, and Davoud Jalali-Vahid, “Design for reliability of automotive systems; case study of dry friction clutch,” International Journal of System Assurance Engineering and Management, 2017. View at Publisher · View at Google Scholar
  • Taha-Hossein Hejazi, and Amirmohsen Hejazi, “Monte Carlo Simulation for Reliability-Based Design of Automotive Complex Subsystems,” Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics, pp. 177–200, 2017. View at Publisher · View at Google Scholar
  • Hamed Fazlollahtabar, and Seyed Taghi Akhavan Niaki, “Fault Tree Analysis for Reliability Evaluation of an Advanced Complex Manufacturing System,” Journal of Advanced Manufacturing Systems, vol. 17, no. 01, pp. 107–118, 2018. View at Publisher · View at Google Scholar