Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2012 (2012), Article ID 681826, 8 pages
Research Article

Development of a Novel Solid-State Sensor Electrode Based on Titanium Thin Film as an Indicator Electrode in Potentiometric and Conductometric Acid-Base Titration in Aqueous Solution

Chemistry Department, Al Azhar University, Gaza, Palestine

Received 28 May 2012; Revised 2 October 2012; Accepted 7 October 2012

Academic Editor: Jiri Homola

Copyright © 2012 Nasser Abu Ghalwa. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


A modified Ti/(SnO2 + Sb2O3) electrode was prepared by thermal deposition on titanium substrate and its use as indicator electrode to potentiometric and conductometric acid-base titration in aqueous solution at 298 K was developed. The E-pH curve is linear with slope of 0.0512 V/dec at 298 K. The standard potential of this electrode, , was determined with respect to the SCE as reference electrode. The recovery percentages for potentiometric and conductometric acid-base titration for acetic acid against NaOH were calculated. The cell constant, specific conductance, and the molar conductance with dilution for some common electrolytes were measured.