Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2014, Article ID 412621, 11 pages
http://dx.doi.org/10.1155/2014/412621
Research Article

Two-Channel Metal Detector Using Two Perpendicular Antennas

Department of Information and Telecommunication Engineering, Incheon National University, Incheon 406-772, Republic of Korea

Received 6 March 2014; Revised 14 June 2014; Accepted 23 June 2014; Published 10 July 2014

Academic Editor: Ignacio R. Matias

Copyright © 2014 Kyoo Nam Choi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. T. McMichael, E. C. Nallon, V. P. Schnee, W. R. Scott, and M. S. Mirotznik, “EBG antenna for GPR colocated with a metal detector for landmine detection,” IEEE Geoscience and Remote Sensing Letters, vol. 10, no. 6, pp. 1329–1333, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. M. S. Sharawi and M. I. Sharawi, “Design and implementation of a low cost VLF metal detector with metal-type discrimination capabilities,” in Proceedings of the IEEE International Conference on Signal Processing and Communications (ICSPC '07), pp. 480–483, November 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Miyakawa and K. Honjo, “Development of instrument detecting nonmetal foreign bodies in food material,” IEEE Transactions on Instrumentation and Measurement, vol. 43, no. 2, pp. 359–363, 1994. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Zourob, S. Mohr, and N. J. Goddard, “Integrated deep-probe optical waveguides for label free bacterial detection,” in Proceedings of the International Symposium on Signals, Systems and Electronics (ISSSE '07), pp. 49–52, Montreal, Canada, August 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Liu and W. Zhou, “The research of metal detectors using in food industry,” in Proceedings of the International Conference on Electronics and Optoelectronics (ICEOE '11), vol. 4, pp. V4-43–V4-45, Dalian, China, July 2011. View at Publisher · View at Google Scholar
  6. J. Kwon, J. Lee, and W. Kim, “Real-time detection of foreign objects using x-ray imaging for dry food manufacturing line,” in Proceedings of the 12th IEEE International Symposium on Consumer Electronics (ISCE '08), pp. 1–4, April 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. W. S. Hua, J. R. Hooks, W. J. Wu, and W. C. Wang, “Development of a polymer based fiberoptic magnetostrictive metal detector system,” in Proceedings of the International Symposium on Optomechatronic Technologies (ISOT '10), pp. 1–5, Toronto, Canada, October 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Nagaishi, F. Kamitani, H. Ota et al., “First practical high Tc SQUID system for the detection of magnetic contaminants in commercial products,” IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 800–803, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Krause, G. I. Panaitov, N. Wolters et al., “Detection of magnetic contaminations in industrial products using HTS SQUIDs,” IEEE Transactions on Applied Superconductivity, vol. 15, no. 2, pp. 729–732, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Yamazaki, H. Nakane, and A. Tanaka, “Basic analysis of a metal detector,” in Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference, vol. 1, pp. 474–477, May 2001. View at Scopus
  11. S. Yamazaki, H. Nakane, and A. Tanaka, “Basic analysis of a metal detector,” IEEE Transactions on Instrumentation and Measurement, vol. 51, no. 4, pp. 810–814, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. P. P. Silvester and D. Omeragic, “Sensitivity of metal detectors to spheroidal targets,” IEEE Transactions on Geoscience and Remote Sensing, vol. 33, no. 6, pp. 1331–1335, 1995. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Tang and L. Carter, “Metal detector head analysis,” in Proceedings of the 5th International Conference on Sensing Technology, pp. 93–96, Palmerston North, New Zealand, 2011.
  14. K. R. Blay, F. Weiss, D. A. Clark, G. J. J. B. de Groot, M. Bick, and D. Sen, “Signal processing techniques for improved performance of a SQUID-based metal-detector,” IEEE Transactions on Applied Superconductivity, vol. 19, no. 3, part 1, pp. 812–815, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Herrmann and K. Sakai, “Objects in powders detected and imaged with THz radiation,” in Proceedings of the IEEE Conference on Lasers and Electro-Optics (CLEO '00), San Francisco, Calif, USA, May 2000. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Brighton and M. J. English, “Calculation of optimum spacing for a three coil axially symmetric metal detector,” Electronics Letters, vol. 29, no. 10, pp. 838–839, 1993. View at Publisher · View at Google Scholar · View at Scopus
  17. P. P. Silvester and D. Omeragić, “Sensitivity maps for metal detector design,” IEEE Transactions on Geoscience and Remote Sensing, vol. 34, no. 3, pp. 788–792, 1996. View at Publisher · View at Google Scholar · View at Scopus