Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2014, Article ID 926314, 8 pages
http://dx.doi.org/10.1155/2014/926314
Research Article

Long-Stroke Nanopositioning Stage Driven by Piezoelectric Motor

1School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200072, China
2Research Center of Robotics and Microsystem and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215021, China
3College of Automation, Harbin Engineering University, Harbin 150001, China

Received 15 July 2014; Revised 14 October 2014; Accepted 5 November 2014; Published 24 November 2014

Academic Editor: Stefania Campopiano

Copyright © 2014 Yong Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Gao, Springer, 2010.
  2. E. B. Brousseau, S. S. Dimov, and D. T. Pham, “Some recent advances in multi-material micro- and nano-manufacturing,” The International Journal of Advanced Manufacturing Technology, vol. 47, pp. 161–180, 2010. View at Publisher · View at Google Scholar
  3. S. Kim and W. Moon, “A micro-pull-off test machine for reliable measurement of adhesive forces on micro/Nano-scale areas,” Journal of Adhesion, vol. 87, no. 2, pp. 139–153, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. A. G. Fowler, A. N. Laskovski, A. C. Hammond, and S. O. R. Moheimani, “A 2-DOF electrostatically actuated MEMS nanopositioner for on-chip AFM,” Journal of Microelectromechanical Systems, vol. 21, no. 4, pp. 771–773, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. S. H. Yang, Y. S. Kim, and J. M. Yoo, “Microelectromechanical systems based Stewart platform with sub-nano resolution,” Applied Physics Letters, vol. 101, no. 6, Article ID 061909, 2012. View at Publisher · View at Google Scholar
  6. T. Hausotte, B. Percle, and G. Jäger, “Advanced three-dimensional scan methods in the nanopositioning and nanomeasuring machine,” Measurement Science and Technology, vol. 20, no. 8, Article ID 084004, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. C. L. Chu, C. T. Lu, H. C. Chen, J. S. Ke, and C. M. Chang, “Development of a micro-CMM with scanning touch probe and high-precision coplanar platform,” in Proceedings of the 6th International Symposium on Precision Mechanical Measurements, 89161M, vol. 8916 of Proceedings of SPIE, Guiyang, China, 2013.
  8. Y. Shen, D. C. Liu, G. F. Lian, and C. A. Zhu, “Modeling and Control of Ultra Precision positioning system for a grating ruling machine,” Applied Mechanics and Materials, vol. 110, p. 2647, 2012. View at Google Scholar
  9. L. T. Sun, J. S. Wang, Z. Q. Han, and C. A. Zhu, “Active vibration suppression based on intelligent control for a long-range ultra-precise positioning system,” Journal of Applied Mechanics and Materials, vol. 87, pp. 123–128, 2011. View at Google Scholar
  10. C. Ru, J. Liu, M. Pang, and Y. Sun, “Controlled ultrasonic micro-dissection of thin tissue sections,” Biomedical Microdevices, vol. 16, no. 4, pp. 567–573, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Gauthier and E. Piat, “Control of a particular micro-macro positioning system applied to cell micromanipulation,” IEEE Transactions on Automation Science and Engineering, vol. 3, no. 3, pp. 264–271, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Hu and D. Sun, “Automatic transportation of biological cells with a robot-tweezer manipulation system,” International Journal of Robotics Research, vol. 30, no. 14, pp. 1681–1694, 2011. View at Google Scholar
  13. W. Zhao, J. Guo, L. Qiu, Y. Wang, J. Meng, and D. Gao, “Low transmittance ICF capsule geometric parameters measurement using laser differential confocal technique,” Optics Communications, vol. 292, pp. 62–67, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Dong, J. Tang, and Y. ElDeeb, “Design of a linear-motion dual-stage actuation system for precision control,” Smart Materials and Structures, vol. 18, no. 9, Article ID 095035, 2009. View at Publisher · View at Google Scholar
  15. K. Kawashima, T. Arai, K. Tadano, T. Fujita, and T. Kagawa, “Development of coarse/fine dual stage using pneumatically driven bellows actuator and cylinder with air bearings,” Precision Engineering, vol. 34, no. 3, pp. 526–533, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. C.-H. Liu, W.-Y. Jywe, Y.-R. Jeng, T.-H. Hsu, and Y.-T. Li, “Design and control of a long-traveling nano-positioning stage,” Precision Engineering, vol. 34, no. 3, pp. 497–506, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. T. Zhang, L. N. Sun, and H. G. Cai, “Study on the fundamental characteristics of piezoelectric element,” Optics and Precision Engineering, vol. 6, no. 5, pp. 26–32, 1998. View at Google Scholar
  18. L. Ma, W. Xie, B. Liu, and L. N. Sun, “Design of micro-positioning stage with flexure hinge,” Optics and Precision Engineering, vol. 22, pp. 338–345, 2014. View at Publisher · View at Google Scholar
  19. D. Q. Liu, Y. M. Huang, Z. F. Wu, and Y. Yang, “Position error compensation for a Macro-micro feed system,” Journal of Mechanical Science and Technology, vol. 30, p. 645, 2011. View at Google Scholar
  20. Q. S. Xu and J. Mech, “Design, testing and precision control of a novel long-stroke flexure micropositioning system,” Mechanism and Machine Theory, vol. 70, pp. 209–224, 2013. View at Publisher · View at Google Scholar
  21. C. S. Zhao, Springer, 2011.
  22. Nanomotion Ltd, “AB2 driver user manual,” D/N: AB02458000-00 REV: C, 2011, http://www.nanomotion.com.
  23. C. Y. Xu, Hefei University of Technology, 2008.
  24. K. C. Fan and Z. F. Lai, “An intelligent nano-positioning control system driven by an ultrasonic motor,” International Journal of Precision Engineering and Manufacturing, vol. 9, no. 3, pp. 40–45, 2008. View at Google Scholar
  25. F. Cheng, K. C. Fan, J. W. Miao, B. K. Li, and H. Y. Wang, “A BPNN-PID based long-stroke nanopositioning control scheme driven by ultrasonic motor,” Precision Engineering, vol. 36, no. 3, pp. 485–493, 2012. View at Publisher · View at Google Scholar
  26. H. Y. Wang, K. C. Fan, J. K. Ye, and C. H. Lin, “A long-stroke nanopositioning control system of the coplanar stage,” IEEE/ASME Transactions on Mechatronics, vol. 19, no. 1, pp. 348–356, 2014. View at Publisher · View at Google Scholar · View at Scopus