Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2015, Article ID 971473, 9 pages
http://dx.doi.org/10.1155/2015/971473
Research Article

Electrophoretic Deposition of SnO2 Nanoparticles and Its LPG Sensing Characteristics

1Department of Ceramics and Glass, Anadolu University, 26470 Eskisehir, Turkey
2Department of Mechanical Engineering, Ondokuz Mayıs University, 55139 Samsun, Turkey
3Department of Materials Science and Engineering, Anadolu University, 26555 Eskisehir, Turkey

Received 26 December 2014; Revised 1 April 2015; Accepted 12 April 2015

Academic Editor: Chandra K. Dixit

Copyright © 2015 Göktuğ Günkaya et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Haridas, A. Chowdhuri, K. Sreenivas, and V. Gupta, “Effect of thickness of platinum catalyst clusters on response of SnO2 thin film sensor for LPG,” Sensors and Actuators B: Chemical, vol. 153, no. 1, pp. 89–95, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Gürbüz, G. Günkaya, and A. Doğan, “LPG sensing characteristics of electrospray deposited SnO2 nanoparticles,” Applied Surface Science, vol. 318, pp. 334–340, 2014. View at Publisher · View at Google Scholar
  3. L. Yang, C. Yin, Z. Zhang, and B. Zhu, “A study of hydrogen sensing properties and microstructure for highly dispersed Pd SnO2 thin films with high response magnitude,” Applied Surface Science, vol. 311, pp. 74–82, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Liu, J. Wan, Q. Fu et al., “Tin oxide films for nitrogen dioxide gas detection at low temperatures,” Sensors and Actuators B, vol. 177, pp. 460–466, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. R. H. R. Castro and D. Gouvêa, “The influence of the Chitosan adsorption on the stability of SnO2 suspensions,” Journal of the European Ceramic Society, vol. 23, no. 6, pp. 897–903, 2003. View at Publisher · View at Google Scholar · View at Scopus
  6. G. G. Mandayo, E. Castaño, F. J. Gracia, A. Cirera, A. Cornet, and J. R. Morante, “Strategies to enhance the carbon monoxide sensitivity of tin oxide thin films,” Sensors and Actuators B: Chemical, vol. 95, no. 1–3, pp. 90–96, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Li, L. Qiao, L. Wang, Y. Zeng, W. Fu, and H. Yang, “Synthesis of self-assembled 3D hollow microspheres of SnO2 with an enhanced gas sensing performance,” Applied Surface Science, vol. 285, pp. 130–135, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Das and V. Jayaraman, “SnO2: a comprehensive review on structures and gas sensors,” Progress in Materials Science, vol. 66, pp. 112–255, 2014. View at Publisher · View at Google Scholar
  9. X. Lou, C. Peng, X. Wang, and W. Chu, “Gas-sensing properties of nanostructured SnO2-based sensor synthesized with different methods,” Vacuum, vol. 81, no. 7, pp. 883–889, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Y. Choi and T. S. Oh, “CO sensitivity of La2O3-doped SnO2 thick film gas sensor,” Thin Solid Films, vol. 547, pp. 230–234, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. G. D. Khuspe, R. D. Sakhare, S. T. Navale et al., “Nanostructured SnO2 thin films for NO2 gas sensing applications,” Ceramics International, vol. 39, no. 8, pp. 8673–8679, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. B. Esfandyarpour, S. Mohajerzadeh, S. Famini, A. Khodadadi, and E. Asl Soleimani, “High sensitivity Pt-doped SnO2 gas sensors fabricated using sol-gel solution on micromachined (1 0 0) Si substrates,” Sensors and Actuators B: Chemical, vol. 100, no. 1-2, pp. 190–194, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Xi, D. Qian, X. Tang, and C. Chen, “High surface area SnO2 nanoparticles: Synthesis and gas sensing properties,” Materials Chemistry and Physics, vol. 108, no. 2-3, pp. 232–236, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. H. C. Wang, Y. Li, and M. J. Yang, “Fast response thin film SnO2 gas sensors operating at room temperature,” Sensors and Actuators B: Chemical, vol. 119, no. 2, pp. 380–383, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. L. A. Patil, M. D. Shinde, A. R. Bari, V. V. Deo, D. M. Patil, and M. P. Kaushik, “Fe2O3 modified thick films of nanostructured SnO2 powder consisting of hollow microspheres synthesized from pyrolysis of ultrasonically atomized aerosol for LPG sensing,” Sensors and Actuators, B: Chemical, vol. 155, no. 1, pp. 174–182, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Neri, T. Krishnakumar, R. Jayaprakash et al., “Sb-SnO2-nanosized-based resistive sensors for NO2 detection,” Journal of Sensors, vol. 2009, Article ID 980965, 7 pages, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. C. A. Randall, J. van Tassel, M. Matsko, and C. P. Bowen, “Electric field processing of ferroelectric particulate ceramics and composites,” in Proceedings of the 10th IEEE International Symposium on Applications of Ferroelectrics, pp. 189–192, IEEE, August 1996. View at Scopus
  18. J. Li, Y. J. Wu, T. Yamamoto, and M. Kuwabara, “Electrophoretic deposition and photoluminescent properties of Eu-doped BaTiO3 thin film from a suspension of monodispersed nanocrystallites,” Science and Technology of Advanced Materials, vol. 5, no. 4, pp. 393–398, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. M. F. de Riccardis, D. Carbone, and A. Rizzo, “A novel method for preparing and characterizing alcoholic EPD suspensions,” Journal of Colloid and Interface Science, vol. 307, no. 1, pp. 109–115, 2007. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Dougami and T. Takada, “Modification of metal oxide semiconductor gas sensor by electrophoretic deposition,” Sensors and Actuators, B: Chemical, vol. 93, no. 1–3, pp. 316–320, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Ortona, T. Fend, H.-W. Yu, K. Raju, and D.-H. Yoon, “Fabrication of cylindrical SiCf/Si/SiC-based composite by electrophoretic deposition and liquid silicon infiltration,” Journal of the European Ceramic Society, vol. 34, no. 5, pp. 1131–1138, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. L. Besra and M. Liu, “A review on fundamentals and applications of electrophoretic deposition (EPD),” Progress in Materials Science, vol. 52, no. 1, pp. 1–61, 2007. View at Publisher · View at Google Scholar · View at Scopus
  23. K. Raju, H. Yu, J. Park, and D. Yoon, “Fabrication of SiCf/SiC composites by alternating current electrophoretic deposition (AC–EPD) and hot pressing,” Journal of the European Ceramic Society, vol. 35, no. 2, pp. 503–511, 2015. View at Publisher · View at Google Scholar
  24. E. Caproni, D. Gouvêa, and R. Muccillo, “Yttria-stabilized zirconia closed end tubes prepared by electrophoretic deposition,” Ceramics International, vol. 37, no. 1, pp. 273–277, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Lommens, D. Van Thourhout, P. F. Smet, D. Poelman, and Z. Hens, “Electrophoretic deposition of ZnO nanoparticles, from micropatterns to substrate coverage,” Nanotechnology, vol. 19, no. 24, Article ID 245301, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. A. A. Sadeghi, T. Ebadzadeh, B. Raissi, and S. Ghashghaie, “Electrophoretic deposition of TiO2 nanoparticles in viscous alcoholic media,” Ceramics International, vol. 39, no. 7, pp. 7433–7438, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. A. R. Gardeshzadeh, B. Raissi, and E. Marzbanrad, “Electrophoretic deposition of SnO2 nanoparticles using low frequency AC electric fields,” Materials Letters, vol. 62, no. 10-11, pp. 1697–1699, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Li, Z. Chen, T. Li, Q. Jiang, Y. Wang, and W. Zhang, “Electrophoretic deposition of crack-free magnesium oxide-coated tin oxide film and its application in dye-sensitized solar cells,” Electrochimica Acta, vol. 133, pp. 275–282, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. K. Ui, S. Kawamura, and N. Kumagai, “Fabrication of binder-free SnO2 nanoparticle electrode for lithium secondary batteries by electrophoretic deposition method,” Electrochimica Acta, vol. 76, pp. 383–388, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. H. Liu, J. Wan, Q. Fu et al., “Tin oxide films for nitrogen dioxide gas detection at low temperatures,” Sensors and Actuators, B: Chemical, vol. 177, pp. 460–466, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. A. R. Gardeshzadeh and B. Raissi, “SnO2 gas sensor fabricated by low frequency alternating field electrophoretic deposition,” Materials Science in Semiconductor Processing, vol. 13, no. 3, pp. 151–155, 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. A. R. Gardeshzadeh, B. Raissi, E. Marzbanrad, and H. Mohebbi, “Fabrication of resistive CO gas sensor based on SnO2 nanopowders via low frequency AC electrophoretic deposition,” Journal of Materials Science: Materials in Electronics, vol. 20, no. 2, pp. 127–131, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. D. S. Dhawale, D. P. Dubal, A. M. More, T. P. Gujar, and C. D. Lokhande, “Room temperature liquefied petroleum gas (LPG) sensor,” Sensors and Actuators B, vol. 147, no. 2, pp. 488–494, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. A. Dogan, G. Gunkaya, E. Suvaci, and M. Niederberger, “Electrophoretic deposition of nano-sized BaTiO3,” Journal of Materials Science, vol. 41, no. 24, pp. 8196–8201, 2006. View at Publisher · View at Google Scholar · View at Scopus
  35. M. Zunic, L. Chevallier, F. Deganello et al., “Electrophoretic deposition of dense BaCe0.9Y0.1O3-x electrolyte thick-films on Ni-based anodes for intermediate temperature solid oxide fuel cells,” Journal of Power Sources, vol. 190, no. 2, pp. 417–422, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. H. Maleki-Ghaleh, M. Rekabeslami, M. S. Shakeri et al., “Nano-structured yttria-stabilized zirconia coating by electrophoretic deposition,” Applied Surface Science, vol. 280, pp. 666–672, 2013. View at Publisher · View at Google Scholar · View at Scopus
  37. J. Li, Y. J. Wu, T. Yamamoto, and M. Kuwabara, “Electrophoretic deposition and photoluminescent properties of Eu-doped BaTiO3 thin film from a suspension of monodispersed nanocrystallites,” Science and Technology of Advanced Materials, vol. 5, no. 4, pp. 393–398, 2004. View at Publisher · View at Google Scholar · View at Scopus
  38. S. Basu and P. K. Basu, “Nanocrystalline metal oxides for methane sensors: role of noble metals,” Journal of Sensors, vol. 2009, Article ID 861968, 20 pages, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. E. R. Leite, J. A. Cerri, E. Longo, J. A. Varela, and C. A. Paskocima, “Sintering of ultrafine undoped SnO2 powder,” Journal of the European Ceramic Society, vol. 21, no. 5, pp. 669–675, 2001. View at Publisher · View at Google Scholar · View at Scopus
  40. T. Hyodo, N. Nishida, Y. Shimizu, and M. Egashira, “Preparation and gas-sensing properties of thermally stable mesoporous SnO2,” Sensors and Actuators B: Chemical, vol. 83, no. 1–3, pp. 209–215, 2002. View at Publisher · View at Google Scholar · View at Scopus
  41. A. Srivastava, K. Jain, A. K. Srivastava, and S. T. Lakshmikumar, “Study of structural and microstructural properties of SnO2 powder for LPG and CNG gas sensors,” Materials Chemistry and Physics, vol. 97, no. 1, pp. 85–90, 2006. View at Publisher · View at Google Scholar · View at Scopus
  42. A. D. Garje and S. N. Sadakale, “LPG sensing properties of platinum doped nanocrystalline SnO2 based thick films with effect of dipping time and sintering temperature,” Advanced Materials Letters, vol. 4, no. 1, pp. 58–63, 2013. View at Publisher · View at Google Scholar · View at Scopus
  43. D.-S. Lee, D.-D. Lee, S.-W. Ban, M. Lee, and Y. T. Kim, “SnO2 gas sensing array for combustible and explosive gas leakage recognition,” IEEE Sensors Journal, vol. 2, no. 3, pp. 140–148, 2002. View at Publisher · View at Google Scholar · View at Scopus
  44. S. Chaisitsak, “Nanocrystalline SnO2:F thin films for liquid petroleum gas sensors,” Sensors, vol. 11, no. 7, pp. 7127–7140, 2011. View at Publisher · View at Google Scholar · View at Scopus
  45. R. S. Niranjan, Y. K. Hwang, D.-K. Kim, S. H. Jhung, J.-S. Chang, and I. S. Mulla, “Nanostructured tin oxide: synthesis and gas-sensing properties,” Materials Chemistry and Physics, vol. 92, no. 2-3, pp. 384–388, 2005. View at Publisher · View at Google Scholar · View at Scopus
  46. S. Majumder, S. Hussain, R. Bhar, and A. K. Pal, “Liquid petroleum gas sensor based on SnO2/Pd composite films deposited on Si/SiO2 substrates,” Vacuum, vol. 81, no. 8, pp. 985–996, 2007. View at Publisher · View at Google Scholar · View at Scopus