Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2016, Article ID 1284520, 8 pages
http://dx.doi.org/10.1155/2016/1284520
Review Article

Review of the Strain Modulation Methods Used in Fiber Bragg Grating Sensors

School of Civil Engineering and Built Environment, Queensland University of Technology, Brisbane, QLD 4000, Australia

Received 4 October 2015; Revised 23 December 2015; Accepted 29 December 2015

Academic Editor: Emily J. Hao

Copyright © 2016 Kuo Li. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. O. Hill and G. Meltz, “Fiber Bragg grating technology fundamentals and overview,” Journal of Lightwave Technology, vol. 15, no. 8, pp. 1263–1276, 1997. View at Publisher · View at Google Scholar · View at Scopus
  2. A. D. Kersey, M. A. Davis, H. J. Patrick et al., “Fiber grating sensors,” Journal of Lightwave Technology, vol. 15, no. 8, pp. 1442–1463, 1997. View at Publisher · View at Google Scholar · View at Scopus
  3. Y.-J. Rao, “In-fibre Bragg grating sensors,” Measurement Science and Technology, vol. 8, no. 4, pp. 355–375, 1997. View at Publisher · View at Google Scholar · View at Scopus
  4. B. Lee, “Review of the present status of optical fiber sensors,” Optical Fiber Technology, vol. 9, no. 2, pp. 57–79, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Jones, “Structural-health monitoring: a sensitive issue,” Nature Photonics, vol. 2, no. 3, pp. 153–154, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Graham-Rowe, “Sensors take the strain,” Nature Photonics, vol. 1, no. 6, pp. 307–309, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. T. H. T. Chan, L. Yu, H. Y. Tam et al., “Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge: background and experimental observation,” Engineering Structures, vol. 28, no. 5, pp. 648–659, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Antunes, R. Travanca, H. Rodrigues et al., “Dynamic structural health monitoring of slender structures using optical sensors,” Sensors, vol. 12, no. 5, pp. 6629–6644, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. V. Mishra, N. Singh, U. Tiwari, and P. Kapur, “Fiber grating sensors in medicine: current and emerging applications,” Sensors and Actuators A: Physical, vol. 167, no. 2, pp. 279–290, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. L. Dziuda, F. W. Skibniewski, M. Krej, and J. Lewandowski, “Monitoring respiration and cardiac activity using fiber Bragg grating-based sensor,” IEEE Transactions on Biomedical Engineering, vol. 59, no. 7, pp. 1934–1942, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. Y.-J. Rao, D. J. Webb, D. A. Jackson, L. Zhang, and I. Bennion, “In-fiber Bragg-grating temperature sensor system for medical applications,” Journal of Lightwave Technology, vol. 15, no. 5, pp. 779–785, 1997. View at Publisher · View at Google Scholar · View at Scopus
  12. L. Mohanty, S. C. Tjin, D. T. T. Lie, S. E. C. Panganiban, and P. K. H. Chow, “Fiber grating sensor for pressure mapping during total knee arthroplasty,” Sensors and Actuators A: Physical, vol. 135, no. 2, pp. 323–328, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Rajan, D. Callaghan, Y. Semenova, M. McGrath, E. Coyle, and G. Farrell, “A fiber Bragg grating-based all-fiber sensing system for telerobotic cutting applications,” IEEE Sensors Journal, vol. 10, no. 12, pp. 1913–1920, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Laudati, F. Mennella, M. Giordano, G. D'Altrui, C. Calisti Tassini, and A. Cusano, “A fiber-optic Bragg grating seismic sensor,” IEEE Photonics Technology Letters, vol. 19, no. 24, pp. 1991–1993, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Zhang, S. Li, Z. Yin, B. Chen, H.-L. Cui, and J. Ning, “Fiber-Bragg-grating-based seismic geophone for oil/gas prospecting,” Optical Engineering, vol. 45, no. 8, Article ID 084404, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Gagliardi, M. Salza, P. Ferraro et al., “Design and test of a laser-based optical-fiber Bragg-grating accelerometer for seismic applications,” Measurement Science & Technology, vol. 19, no. 8, Article ID 085306, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. K. Li, Z. A. Zhou, A. C. Liu, X. P. Ye, H. X. Li, and D. Q. Cheng, “Using fiber Bragg grating in geothermal monitoring,” in Rock Stress and Earthquakes, F. Xie, Ed., pp. 815–817, Taylor & Francis Group, 2010. View at Google Scholar
  18. A. Gusarov, “Long-term exposure of fiber Bragg gratings in the BR1 low-flux nuclear reactor,” IEEE Transactions on Nuclear Science, vol. 57, no. 4, pp. 2044–2048, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. K. S. Kim, Y. C. Song, G. S. Pang, and D. J. Yoon, “Study on the application of Fiber Bragg Grating sensors for the containment structures of nuclear power plants,” in Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace, Pts 1 and 2, M. Tomizuka, Ed., pp. 584–590, 2005. View at Google Scholar
  20. A. F. Fernandez, A. I. Gusarov, B. Brichard et al., “Temperature monitoring of nuclear reactor cores with multiplexed fiber Bragg grating sensors,” Optical Engineering, vol. 41, no. 6, pp. 1246–1254, 2002. View at Publisher · View at Google Scholar · View at Scopus
  21. E. Udd, “25 Years of structural monitoring using fiber optic sensors,” in Smart Sensor Phenomena, Technology, Networks, and Systems 2011, W. Ecke, K. J. Peters, and T. E. Matikas, Eds., vol. 7982 of Proceedings of SPIE, 2011. View at Publisher · View at Google Scholar
  22. M. Buric, T. Chen, M. Maklad, P. R. Swinehart, and K. P. Chen, “Multiplexable low-temperature fiber Bragg grating hydrogen sensors,” IEEE Photonics Technology Letters, vol. 21, no. 21, pp. 1594–1596, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. Smartfibres, “FBG applications,” http://www.smartfibres.com/FBG-sensors.
  24. FBGS, “FBG applications,” http://www.fbgs.com/.
  25. Timbercon, “FBG applications,” http://www.timbercon.com/fiber-bragg-grating-sensor-technology/.
  26. National-Instruments, “FBG applications,” http://www.ni.com/opticalsensing/.
  27. FOS-TA, “FBG applications,” http://www.fos-ta.com/.
  28. E. Udd, Fiber Optic Sensors: An Introduction for Engineers and Scientists, Wiley-Interscience, Hoboken, NJ, USA, 2006.
  29. J. Dakin and B. Culshaw, Optical Fiber Sensors, Artech House, 1988.
  30. R. Kashyap, Fiber Bragg Gratings, Academic Press, Cambridge, Mass, USA, 2009.
  31. J. L. Cruz, L. Dong, and L. Reekie, “Improved thermal sensitivity of fibre Bragg gratings using a polymer overlayer,” Electronics Letters, vol. 32, no. 4, pp. 385–387, 1996. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Gupta, T. Mizunami, T. Yamao, and T. Shimomura, “Fiber Bragg grating cryogenic temperature sensors,” Applied Optics, vol. 35, no. 25, pp. 5202–5205, 1996. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Jung, H. Nam, B. Lee, J. O. Byun, and N. S. Kim, “Fiber Bragg grating temperature sensor with controllable sensitivity,” Applied Optics, vol. 38, no. 13, pp. 2752–2754, 1999. View at Publisher · View at Google Scholar · View at Scopus
  34. T. Mizunami, H. Tatehata, and H. Kawashima, “High-sensitivity cryogenic fibre-Bragg-grating temperature sensors using Teflon substrates,” Measurement Science & Technology, vol. 12, no. 7, pp. 914–917, 2001. View at Publisher · View at Google Scholar · View at Scopus
  35. S. W. James, R. P. Tatam, A. Twin, M. Morgan, and P. Noonan, “Strain response of fibre Bragg grating sensors at cryogenic temperatures,” Measurement Science and Technology, vol. 13, no. 10, pp. 1535–1539, 2002. View at Publisher · View at Google Scholar · View at Scopus
  36. C. Lupi, F. Felli, L. Ippoliti et al., “Metal coating for enhancing the sensitivity of fibre Bragg grating sensors at cryogenic temperature,” Smart Materials & Structures, vol. 14, no. 6, pp. N71–N76, 2005. View at Publisher · View at Google Scholar · View at Scopus
  37. K. Li, Z. A. Zhou, and A. Liu, “A high sensitive fiber Bragg grating cryogenic temperature sensor,” Chinese Optics Letters, vol. 7, no. 2, pp. 121–123, 2009. View at Publisher · View at Google Scholar · View at Scopus
  38. K. Li, Z. Zhou, A. Liu, and X. Wang, “High-sensitivity fiber bragg grating temperature sensor at high temperature,” Guangxue Xuebao/Acta Optica Sinica, vol. 29, no. 1, pp. 249–251, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. W. W. Morey and W. L. Glomb, “Incorporated Bragg filter temperature compensated optical waveguide device,” US Patent 07/456,440, 1991.
  40. G. W. Yoffe, P. A. Krug, F. Ouellette, and D. A. Thorncraft, “Passive temperature-compensating package for optical-fiber gratings,” Applied Optics, vol. 34, no. 30, pp. 6859–6861, 1995. View at Publisher · View at Google Scholar · View at Scopus
  41. M. G. Xu, J.-L. Archambault, L. Reekie, and J. P. Dakin, “Discrimination between strain and temperature effects using dual-wavelength fiber grating sensors,” Electronics Letters, vol. 30, no. 13, pp. 1085–1087, 1994. View at Publisher · View at Google Scholar · View at Scopus
  42. M. G. Xu, L. Dong, L. Reekie, J. A. Tucknott, and J. L. Cruz, “Temperature-independent strain sensor using a chirped Bragg grating in a tapered optical fibre,” Electronics Letters, vol. 31, no. 10, pp. 823–825, 1995. View at Publisher · View at Google Scholar
  43. S. W. James, M. L. Dockney, and R. P. Tatam, “Simultaneous independent temperature and strain measurement using in-fibre Bragg grating sensors,” Electronics Letters, vol. 32, no. 12, pp. 1133–1134, 1996. View at Publisher · View at Google Scholar · View at Scopus
  44. M. H. Song, S. B. Lee, S. S. Choi, and B. H. Lee, “Simultaneous measurement of temperature and strain using two fiber Bragg gratings embedded in a glass tube,” Optical Fiber Technology, vol. 3, no. 2, pp. 194–196, 1997. View at Publisher · View at Google Scholar · View at Scopus
  45. Y. L. Lo, “Using in-fiber Bragg-grating sensors for measuring axial strain and temperature simultaneously on surfaces of structures,” Optical Engineering, vol. 37, no. 8, pp. 2272–2276, 1998. View at Publisher · View at Google Scholar · View at Scopus
  46. Y. Yu, H. Tam, W. Chung, and M. S. Demokan, “Fiber Bragg grating sensor for simultaneous measurement of displacement and temperature,” Optics Letters, vol. 25, no. 16, pp. 1141–1143, 2000. View at Publisher · View at Google Scholar · View at Scopus
  47. X. Y. Dong, X. F. Yang, C.-L. Zhao, L. Ding, P. Shum, and N. Q. Ngo, “A novel temperature-insensitive fiber Bragg grating sensor for displacement measurement,” Smart Materials & Structures, vol. 14, no. 2, pp. N7–N10, 2005. View at Publisher · View at Google Scholar · View at Scopus
  48. K. Li and Z. Zhou, “A high sensitive fiber Bragg grating strain sensor with automatic temperature compensation,” Chinese Optics Letters, vol. 7, no. 3, pp. 191–193, 2009. View at Publisher · View at Google Scholar · View at Scopus
  49. L. A. Fernandes, M. Becker, O. Frazão et al., “Temperature and strain sensing with femtosecond laser written Bragg gratings in defect and nondefect suspended-silica-core fibers,” IEEE Photonics Technology Letters, vol. 24, no. 7, pp. 554–556, 2012. View at Publisher · View at Google Scholar · View at Scopus
  50. X. Y. Dong, C. L. Zhan, K. Hu, P. Shum, and C. C. Chan, “Temperature-insensitive tilt sensor with strain-chirped fiber Bragg gratings,” IEEE Photonics Technology Letters, vol. 17, no. 11, pp. 2394–2396, 2005. View at Publisher · View at Google Scholar · View at Scopus
  51. H.-J. Chen, L. Wang, and W. F. Liu, “Temperature-insensitive fiber Bragg grating tilt sensor,” Applied Optics, vol. 47, no. 4, pp. 556–560, 2008. View at Publisher · View at Google Scholar · View at Scopus
  52. H. Y. Au, S. K. Khijwania, H. Y. Fu, W. H. Chung, and H. Y. Tam, “Temperature-insensitive fiber bragg grating based tilt sensor with large dynamic range,” Journal of Lightwave Technology, vol. 29, no. 11, Article ID 5740549, pp. 1714–1720, 2011. View at Publisher · View at Google Scholar · View at Scopus
  53. B.-O. Guan, H.-Y. Tam, and S.-Y. Liu, “Temperature-independent fiber Bragg grating tilt sensor,” IEEE Photonics Technology Letters, vol. 16, no. 1, pp. 224–226, 2004. View at Publisher · View at Google Scholar · View at Scopus
  54. R. Aneesh, M. Maharana, P. Munendhar, H. Y. Tam, and S. K. Khijwania, “Simple temperature insensitive fiber Bragg grating based tilt sensor with enhanced tunability,” Applied Optics, vol. 50, no. 25, pp. E172–E176, 2011. View at Publisher · View at Google Scholar · View at Scopus
  55. S. He, X. Dong, K. Ni, Y. Jin, C. C. Chan, and P. Shum, “Temperature-insensitive 2D tilt sensor with three fiber Bragg gratings,” Measurement Science and Technology, vol. 21, no. 2, Article ID 025203, 2010. View at Publisher · View at Google Scholar · View at Scopus
  56. K. Ni, X. Dong, Y. Jin, and H. Xu, “Temperature-independent fiber Bragg grating tilt sensor,” Microwave and Optical Technology Letters, vol. 52, no. 10, pp. 2250–2252, 2010. View at Publisher · View at Google Scholar · View at Scopus
  57. K. Li, T. H. T. Chan, M. H. Yau, D. P. Thambiratnam, and H. Y. Tam, “Experimental verification of the modified spring-mass theory of fiber Bragg grating accelerometers using transverse forces,” Applied Optics, vol. 53, no. 6, pp. 1200–1211, 2014. View at Publisher · View at Google Scholar · View at Scopus
  58. K. Li, T. H. T. Chan, M. H. Yau, D. P. Thambiratnam, and H. Y. Tam, “Biaxial fiber Bragg grating accelerometer using axial and transverse forces,” IEEE Photonics Technology Letters, vol. 26, no. 15, pp. 1549–1552, 2014. View at Publisher · View at Google Scholar · View at Scopus
  59. K. Li, T. H. T. Chan, M. H. Yau, T. Nguyen, D. P. Thambiratnam, and H. Y. Tam, “Very sensitive fiber Bragg grating accelerometer using transverse forces with an easy over-range protection and low cross axial sensitivity,” Applied Optics, vol. 52, no. 25, pp. 6401–6410, 2013. View at Publisher · View at Google Scholar · View at Scopus
  60. A. Stefani, S. Andresen, W. Yuan, N. Herholdt-Rasmussen, and O. Bang, “High sensitivity polymer optical fiber-Bragg-grating-based accelerometer,” IEEE Photonics Technology Letters, vol. 24, no. 9, pp. 763–765, 2012. View at Publisher · View at Google Scholar · View at Scopus
  61. S. R. K. Morikawa, A. S. Ribeiro, R. D. Regazzi, L. C. G. Valente, and A. M. B. Braga, “Triaxial Bragg grating accelerometer,” in Proceedings of the 15th Optical Fiber Sensors Conference Technical Digest, vol. 1, pp. 95–98, IEEE, Portland, Ore, USA, May 2002. View at Publisher · View at Google Scholar
  62. P. Antunes, H. Varum, and P. S. André, “Uniaxial fiber Bragg grating accelerometer system with temperature and cross axis insensitivity,” Measurement, vol. 44, no. 1, pp. 55–59, 2011. View at Publisher · View at Google Scholar · View at Scopus
  63. P. F. Costa Antunes, C. A. Marques, H. Varum, and P. S. Andre, “Biaxial optical accelerometer and high-angle inclinometer with temperature and cross-axis insensitivity,” IEEE Sensors Journal, vol. 12, no. 7, pp. 2399–2406, 2012. View at Publisher · View at Google Scholar · View at Scopus
  64. J. Zhang, X. Qiao, M. Hu et al., “Proposal of metal bellows-based fiber Bragg grating accelerometer,” Chinese Optics Letters, vol. 9, no. 9, Article ID 090606, 2011. View at Publisher · View at Google Scholar · View at Scopus
  65. T. A. Berkoff and A. D. Kersey, “Experimental demonstration of a fiber bragg grating accelerometer,” IEEE Photonics Technology Letters, vol. 8, no. 12, pp. 1677–1679, 1996. View at Publisher · View at Google Scholar · View at Scopus
  66. Y. X. Guo, D. S. Zhang, H. Meng, X. Y. Wen, and Z. D. Zhou, “Metal packaged fiber Bragg grating accelerometer,” in 22nd International Conference on Optical Fiber Sensors (OFS '12), vol. 8421 of Proceedings of SPIE, Beijing, China, October 2012. View at Publisher · View at Google Scholar
  67. K. Li, M. H. Yau, T. H. T. Chan, D. Thambiratnam, and H. Y. Tam, “Fiber Bragg grating strain modulation based on nonlinear string transverse-force amplifier,” Optics Letters, vol. 38, no. 3, pp. 311–313, 2013. View at Publisher · View at Google Scholar · View at Scopus
  68. K. Li, T. H. Chan, M. H. Yau, D. P. Thambiratnam, and H. Y. Tam, “Fiber Bragg grating accelerometer based on a transversely rotating stick,” Optik, vol. 126, no. 23, pp. 4337–4341, 2015. View at Publisher · View at Google Scholar
  69. H.-J. Sheng, W.-F. Liu, K.-R. Lin, S.-S. Bor, and M.-Y. Fu, “High-sensitivity temperature-independent differential pressure sensor using fiber Bragg gratings,” Optics Express, vol. 16, no. 20, pp. 16013–16018, 2008. View at Publisher · View at Google Scholar · View at Scopus
  70. Y. S. Hsu, L. Wang, W.-F. Liu, and Y. J. Chiang, “Temperature compensation of optical fiber Bragg grating pressure sensor,” IEEE Photonics Technology Letters, vol. 18, no. 7, pp. 874–876, 2006. View at Publisher · View at Google Scholar · View at Scopus
  71. H.-J. Sheng, M.-Y. Fu, T.-C. Chen, W.-F. Liu, and S.-S. Bor, “A lateral pressure sensor using a fiber Bragg grating,” IEEE Photonics Technology Letters, vol. 16, no. 4, pp. 1146–1148, 2004. View at Publisher · View at Google Scholar · View at Scopus
  72. Y.-Q. Liu, Z.-Y. Guo, Z.-G. Liu, D.-H. Zhao, C.-F. Ge, and X.-Y. Dong, “Fiber grating sensor with enhanced pressure and temperature sensitivity,” Chinese Physics Letters, vol. 17, no. 2, pp. 115–116, 2000. View at Publisher · View at Google Scholar · View at Scopus
  73. M. G. Xu, H. Geiger, and J. P. Dakin, “Fibre grating pressure sensor with enhanced sensitivity using a glass-bubble housing,” Electronics Letters, vol. 32, no. 2, pp. 128–129, 1996. View at Publisher · View at Google Scholar · View at Scopus
  74. Y. Zhang, D. Feng, Z. Liu et al., “High-sensitivity pressure sensor using a shielded polymer-coated fiber Bragg grating,” IEEE Photonics Technology Letters, vol. 13, no. 6, pp. 618–619, 2001. View at Publisher · View at Google Scholar · View at Scopus
  75. T. Guo, Q. Zhao, H. Zhang et al., “Temperature-insensitive fiber Bragg grating dynamic pressure sensing system,” Optics Letters, vol. 31, no. 15, pp. 2269–2271, 2006. View at Publisher · View at Google Scholar · View at Scopus
  76. L. Mohanty, L. M. Koh, and S. C. Tjin, “Fiber Bragg grating microphone system,” Applied Physics Letters, vol. 89, no. 16, Article ID 161109, 2006. View at Publisher · View at Google Scholar · View at Scopus
  77. G. B. Hocker, “Fiber-optic sensing of pressure and temperature,” Applied Optics, vol. 18, no. 9, pp. 1445–1448, 1979. View at Publisher · View at Google Scholar · View at Scopus
  78. M. G. Xu, L. Reekie, Y. T. Chow, and J. P. Dakin, “Optical in-fibre grating high pressure sensor,” Electronics Letters, vol. 29, no. 4, pp. 398–399, 1993. View at Publisher · View at Google Scholar · View at Scopus
  79. Y. Dai, M. Yang, G. Xu, and Y. Yuan, “Magnetic field sensor based on fiber Bragg grating with a spiral microgroove ablated by femtosecond laser,” Optics Express, vol. 21, no. 14, pp. 17386–17391, 2013. View at Publisher · View at Google Scholar · View at Scopus
  80. J. Mora, A. Díez, J. L. Cruz, and M. V. Andrés, “A magnetostrictive sensor interrogated by fiber gratings for DC-current and temperature discrimination,” IEEE Photonics Technology Letters, vol. 12, no. 12, pp. 1680–1682, 2000. View at Publisher · View at Google Scholar · View at Scopus
  81. K. S. Chiang, R. Kancheti, and V. Rastogi, “Temperature-compensated fiber-Bragg-grating-based magnetostrictive sensor for dc and ac currents,” Optical Engineering, vol. 42, no. 7, pp. 1906–1909, 2003. View at Publisher · View at Google Scholar · View at Scopus
  82. C. Ambrosino, S. Campopiano, A. Cutolo, and A. Cusano, “Sensitivity tuning in terfenol-D based fiber Bragg grating magnetic sensors,” IEEE Sensors Journal, vol. 8, no. 9, pp. 1519–1520, 2008. View at Publisher · View at Google Scholar · View at Scopus
  83. M. H. Yang, J. X. Dai, C. M. Zhou, and D. S. Jiang, “Optical fiber magnetic field sensors with TbDyFe magnetostrictive thin films as sensing materials,” Optics Express, vol. 17, no. 23, pp. 20777–20782, 2009. View at Publisher · View at Google Scholar · View at Scopus
  84. J. X. Dai, M. H. Yang, X. B. Li, H. L. Liu, and X. L. Tong, “Magnetic field sensor based on magnetic fluid clad etched fiber Bragg grating,” Optical Fiber Technology, vol. 17, no. 3, pp. 210–213, 2011. View at Publisher · View at Google Scholar · View at Scopus
  85. G. N. Smith, T. Allsop, K. Kalli et al., “Characterisation and performance of a Terfenol-D coated femtosecond laser inscribed optical fibre Bragg sensor with a laser ablated microslot for the detection of static magnetic fields,” Optics Express, vol. 19, no. 1, pp. 363–370, 2011. View at Publisher · View at Google Scholar · View at Scopus
  86. H. Liu, S. W. Or, and H. Y. Tam, “Magnetostrictive composite-fiber Bragg grating (MC-FBG) magnetic field sensor,” Sensors and Actuators A: Physical, vol. 173, no. 1, pp. 122–126, 2012. View at Publisher · View at Google Scholar · View at Scopus
  87. X.-Z. Lin, Y. Zhang, H.-L. An, and H.-D. Liu, “Electrically tunable singlemode fibre Bragg reflective filter,” Electronics Letters, vol. 30, no. 11, pp. 887–888, 1994. View at Publisher · View at Google Scholar · View at Scopus
  88. P. M. Cavaleiro, F. M. Araújo, and A. B. L. Ribeiro, “Metal-coated fibre Bragg grating sensor for electric current metering,” Electronics Letters, vol. 34, no. 11, pp. 1133–1135, 1998. View at Publisher · View at Google Scholar · View at Scopus
  89. H.-J. Sheng, P.-T. Tsai, W.-Y. Lee et al., “Random rotary position sensor based on fiber Bragg gratings,” IEEE Sensors Journal, vol. 12, no. 5, pp. 1436–1441, 2012. View at Publisher · View at Google Scholar · View at Scopus