Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2016 (2016), Article ID 6874125, 9 pages
http://dx.doi.org/10.1155/2016/6874125
Research Article

An Electrical Wave Height Measurement at Spatial Multipoint Locations in Liquid Dampers for Structural Vibration Mitigation

Department of Architectural Engineering, Dankook University, Jukjeon-dong, Suji-gu, Yongin-si, Gyeonggi-do 448-701, Republic of Korea

Received 29 February 2016; Accepted 11 July 2016

Academic Editor: Ki Y. Koo

Copyright © 2016 Junhee Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Kareem, T. Kijewski, and Y. Tamura, “Mitigation of motions of tall buildings with specific examples of recent applications,” Wind and Structures, vol. 2, no. 3, pp. 201–251, 1999. View at Publisher · View at Google Scholar · View at Scopus
  2. J. P. Den Hartog, Mechanical Vibrations, McGraw-Hill, New York, NY, USA, 4th edition, 1956.
  3. Y. Fujino, L. Sun, B. M. Pacheco, and P. Chaiseri, “Tuned liquid damper (TLD) for suppressing horizontal motion of structures,” Journal of Engineering Mechanics, vol. 118, no. 10, pp. 2017–2030, 1992. View at Publisher · View at Google Scholar · View at Scopus
  4. L. M. Sun, Y. Fujino, B. M. Pacheco, and P. Chaiseri, “Modelling of tuned liquid damper (TLD),” Journal of Wind Engineering and Industrial Aerodynamics, vol. 43, no. 1–3, pp. 1883–1894, 1992. View at Publisher · View at Google Scholar · View at Scopus
  5. K. C. S. Kwok and B. Samali, “Performance of tuned mass dampers under wind loads,” Engineering Structures, vol. 17, no. 9, pp. 655–667, 1995. View at Publisher · View at Google Scholar · View at Scopus
  6. K.-W. Min, J. Kim, and Y.-W. Kim, “Design and test of tuned liquid mass dampers for attenuation of the wind responses of a full scale building,” Smart Materials and Structures, vol. 23, no. 4, Article ID 045020, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Tamura, K. Fujii, T. Ohtsuki, T. Wakahara, and R. Kohsaka, “Effectiveness of tuned liquid dampers under wind excitation,” Engineering Structures, vol. 17, no. 9, pp. 609–621, 1995. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Benerfi, M. Murudi, and A. H. Shah, “Tuned liquid dampers for controlling earthquake response of structures,” Earthquake Engineering and Structural Dynamics, vol. 29, pp. 454–463, 2000. View at Google Scholar
  9. K.-W. Min, J. Kim, and H.-R. Lee, “A design procedure of two-way liquid dampers for attenuation of wind-induced responses of tall buildings,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 129, pp. 22–30, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Sakai, S. Takaeda, and T. Tamaki, “Tunes liquid column damper-new type device for suppression of building vibration,” in Proceedings of the International Conference on High-Rise Building, pp. 926–931, Nanjing, China, 1989.
  11. Y. L. Xu, B. Samali, and K. C. S. Kwok, “Control of along-wind response of structures by mass and liquid dampers,” ASCE Journal of Engineering Mechanics, vol. 118, no. 1, pp. 20–39, 1992. View at Publisher · View at Google Scholar · View at Scopus
  12. J.-K. Yu, T. Wakahara, and D. A. Reed, “A non-linear numerical model of the tuned liquid damper,” Earthquake Engineering and Structural Dynamics, vol. 28, no. 6, pp. 671–686, 1999. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Gao, K. C. S. Kwok, and B. Samali, “Optimization of tuned liquid column dampers,” Engineering Structures, vol. 19, no. 6, pp. 476–486, 1997. View at Publisher · View at Google Scholar · View at Scopus
  14. S. K. Yalla and A. Kareem, “Optimum absorber parameters for tuned liquid column dampers,” Journal of Structural Engineering, vol. 126, no. 8, pp. 906–915, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. J.-C. Wu, C.-H. Chang, and Y.-Y. Lin, “Optimal designs for non-uniform tuned liquid column dampers in horizontal motion,” Journal of Sound and Vibration, vol. 326, no. 1-2, pp. 104–122, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. F. Ziegler, “The tuned liquid column damper as a cost-effective alternative for the mechanical damper in civil engineering structures,” International Journal of Acoustics & Vibrations, vol. 12, no. 1, pp. 25–39, 2007. View at Google Scholar · View at Scopus
  17. J.-C. Wu, M.-H. Shih, Y.-Y. Lin, and Y.-C. Shen, “Design guidelines for tuned liquid column damper for structures responding to wind,” Engineering Structures, vol. 27, no. 13, pp. 1893–1905, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. C. C. Chang and W. L. Qu, “Unified dynamic absorber design formulas for wind-induced vibration control of tall buildings,” The Structural Design of Tall Buildings, vol. 7, no. 2, pp. 147–166, 1998. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Ziegler, “Special design of tuned liquid column-gas dampers for the control of spatial structural vibrations,” Acta Mechanica, vol. 201, no. 1–4, pp. 249–267, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Fujino, L. Sun, B. M. Pacheco, and M. Isobe, “Nonlinear waves and dynamic pressure in rectangular tuned liquid damper (TLD): simulation and experimental verification,” Structural Engineering/Earthquake Engineering, JSCE, vol. 6, no. 2, pp. 81–92, 1989. View at Google Scholar
  21. K. Schroder, Semiconductor Material and Device Characterization, John Wiley and Sons, 2nd edition, 1998.
  22. F. M. Smits, “Measurement of sheet resistivities with the four-point probe,” Bell System Technical Journal, vol. 37, no. 3, pp. 711–718, 1958. View at Publisher · View at Google Scholar
  23. F. Wenner, “A method of measuring earth resistivity,” Bulletin of the Bureau of Standards, vol. 12, no. 4, pp. 469–478, 1915. View at Publisher · View at Google Scholar
  24. L. B. Valdes, “Resistivity measurements on germanium for transistors,” Proceedings of the IRE, vol. 42, no. 2, pp. 420–427, 1954. View at Publisher · View at Google Scholar · View at Scopus
  25. R. Hall, “Minimizing errors of four point probe measurements on circular wafers,” Journal of Scientific Instruments, vol. 44, no. 1, pp. 53–54, 1967. View at Publisher · View at Google Scholar · View at Scopus