Table of Contents Author Guidelines Submit a Manuscript
Journal of Sensors
Volume 2018, Article ID 1953528, 10 pages
https://doi.org/10.1155/2018/1953528
Research Article

Feasibility Study of Interlayer Slide Monitoring Using Postembedded Piezoceramic Smart Aggregates

1Key Laboratory of Earthquake Geodesy, Institute of Seismology, China Earthquake Administration, Wuhan 430071, China
2Department of Mechanical Engineering, University of Houston, Houston, TX 77204, USA
3Department of Civil and Environmental Engineering, University of Houston, Houston, TX 77204, USA

Correspondence should be addressed to Gangbing Song; ude.hu@gnosg

Received 10 August 2017; Accepted 3 January 2018; Published 25 March 2018

Academic Editor: Yinan Zhang

Copyright © 2018 Jianchao Wu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Savvaidis, “Existing landslide monitoring systems and techniques,” in From Stars to Earth and Culture. In Honor of the Memory of Professor Alexandros Tsioumis, pp. 242–258, The Aristotle University of Thessaloniki, Greece, 2003. View at Google Scholar
  2. D. Tarchi, N. Casagli, R. Fanti et al., “Landslide monitoring by using ground-based SAR interferometry: an example of application to the Tessina landslide in Italy,” Engineering Geology, vol. 68, no. 1-2, pp. 15–30, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. X. Ye, H. Kaufmann, and X. F. Guo, “Landslide monitoring in the Three Gorges area using D-InSAR and corner reflectors,” Photogrammetric Engineering & Remote Sensing, vol. 70, no. 10, pp. 1167–1172, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Colesanti and J. Wasowski, “Investigating landslides with space-borne synthetic aperture radar (SAR) interferometry,” Engineering Geology, vol. 88, no. 3-4, pp. 173–199, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Bitelli, M. Dubbini, and A. Zanutta, “Terrestrial laser scanning and digital photogrammetry techniques to monitor landslide bodies,” International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, vol. 35, no. B5, pp. 246–251, 2004. View at Google Scholar
  6. E. Brückl, F. K. Brunner, and K. Kraus, “Kinematics of a deep-seated landslide derived from photogrammetric, GPS and geophysical data,” Engineering Geology, vol. 88, no. 3-4, pp. 149–159, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. S. C. Stiros, C. Vichas, and C. Skourtis, “Landslide monitoring based on geodetically derived distance changes,” Journal of Surveying Engineering, vol. 130, no. 4, pp. 156–162, 2004. View at Publisher · View at Google Scholar
  8. M. Haberler-Weber, “Analysis and interpretation of geodetic landslide monitoring data based on fuzzy systems,” Natural Hazards and Earth System Science, vol. 5, no. 5, pp. 755–760, 2005. View at Publisher · View at Google Scholar
  9. G. Barla, F. Antolini, M. Barla, E. Mensi, and G. Piovano, “Monitoring of the Beauregard landslide (Aosta Valley, Italy) using advanced and conventional techniques,” Engineering Geology, vol. 116, no. 3-4, pp. 218–235, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. J. A. Gili, J. Corominas, and J. Rius, “Using Global Positioning System techniques in landslide monitoring,” Engineering Geology, vol. 55, no. 3, pp. 167–192, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. C. Squarzoni, C. Delacourt, and P. Allemand, “Differential single-frequency GPS monitoring of the La Valette landslide (French Alps),” Engineering Geology, vol. 79, no. 3-4, pp. 215–229, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Wang, “Millimeter-accuracy GPS landslide monitoring using precise point positioning with single receiver phase ambiguity (PPP-SRPA) resolution: a case study in Puerto Rico,” Journal of Geodetic Science, vol. 3, no. 1, pp. 22–31, 2013. View at Publisher · View at Google Scholar
  13. L. Gui, K. Yin, and T. Glade, “Landslide displacement analysis based on fractal theory, in Wanzhou District, Three Gorges Reservoir, China,” Geomatics, Natural Hazards and Risk, vol. 7, no. 5, pp. 1707–1725, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Corominas, J. Moya, A. Lloret et al., “Measurement of landslide displacements using a wire extensometer,” Engineering Geology, vol. 55, no. 3, pp. 149–166, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Simeoni and L. Mongiovì, “Inclinometer monitoring of the Castelrotto landslide in Italy,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 133, no. 6, pp. 653–666, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. B. Sabet Divsholi and Y. Yang, “Combined embedded and surface-bonded piezoelectric transducers for monitoring of concrete structures,” NDT & E International, vol. 65, pp. 28–34, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. C. Dumoulin, G. Karaiskos, J. Carette, S. Staquet, and A. Deraemaeker, “Monitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers,” Smart Materials and Structures, vol. 21, no. 4, article 047001, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. Z. Shi and T. Zhang, “Bending analysis of a piezoelectric curved actuator with a generally graded property for the piezoelectric parameter,” Smart Materials and Structures, vol. 17, no. 4, article 045018, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. V. P. Venugopal and G. Wang, “Modeling and analysis of Lamb wave propagation in a beam under lead zirconate titanate actuation and sensing,” Journal of Intelligent Material Systems and Structures, vol. 26, no. 13, pp. 1679–1698, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Yang, V. G. M. Annamdas, C. Wang, and Y. Zhou, “Application of multiplexed FBG and PZT impedance sensors for health monitoring of rocks,” Sensors, vol. 8, no. 1, pp. 271–289, 2008. View at Publisher · View at Google Scholar
  21. W. Dansheng, L. Zhi, and Z. Hongping, “A new three-dimensional electromechanical impedance model for an embedded dual-PZT transducer,” Smart Materials and Structures, vol. 25, no. 7, article 075002, 2016. View at Publisher · View at Google Scholar · View at Scopus
  22. D. Wang, Q. Wang, H. Wang, and H. Zhu, “Experimental study on damage detection in timber specimens based on an electromechanical impedance technique and RMSD-based Mahalanobis distance,” Sensors, vol. 16, no. 10, p. 1765, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. C. Dumoulin and A. Deraemaeker, “Design optimization of embedded ultrasonic transducers for concrete structures assessment,” Ultrasonics, vol. 79, pp. 18–33, 2017. View at Publisher · View at Google Scholar · View at Scopus
  24. Z. F. Shi, H. J. Xiang, and B. F. Spencer Jr, “Exact analysis of multi-layer piezoelectric/composite cantilevers,” Smart Materials and Structures, vol. 15, no. 5, pp. 1447–1458, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. G. Song, H. Li, B. Gajic, W. Zhou, P. Chen, and H. Gu, “Wind turbine blade health monitoring with piezoceramic-based wireless sensor network,” International Journal of Smart and Nano Materials, vol. 4, no. 3, pp. 150–166, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. Z. Wu and M. Abe, “Structural health monitoring and intelligent infrastructure,” in Proceedings of the First International Conference on Structural Health Monitoring and Intelligent Infrastructure, 13-15 November 2003, Tokyo, Japan, Taylor & Francis, 2003.
  27. S. V. Gopinathan, V. V. Varadan, and V. K. Varadan, “A review and critique of theories for piezoelectric laminates,” Smart Materials and Structures, vol. 9, no. 1, pp. 24–48, 2000. View at Publisher · View at Google Scholar · View at Scopus
  28. X. Wang, L. Ye, Y.-W. Mai, and S. C. Galea, “Designing for piezoelectric ceramic wafers bonded on structures using force transfer criteria,” Smart Materials and Structures, vol. 9, no. 2, pp. 157–162, 2000. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Kamlah and Q. Jiang, “A constitutive model for ferroelectric PZT ceramics under uniaxial loading,” Smart Materials and Structures, vol. 8, no. 4, pp. 441–459, 1999. View at Publisher · View at Google Scholar · View at Scopus
  30. S. C. Hwang, C. S. Lynch, and R. M. McMeeking, “Ferroelectric/ferroelastic interactions and a polarization switching model,” Acta Metallurgica et Materialia, vol. 43, no. 5, pp. 2073–2084, 1995. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Kamlah, “Ferroelectric and ferroelastic piezoceramics – modeling of electromechanical hysteresis phenomena,” Continuum Mechanics and Thermodynamics, vol. 13, no. 4, pp. 219–268, 2001. View at Publisher · View at Google Scholar · View at Scopus
  32. X.-F. Li, X.-L. Peng, and K. Y. Lee, “The static response of functionally graded radially polarized piezoelectric spherical shells as sensors and actuators,” Smart Materials and Structures, vol. 19, no. 3, article 035010, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. H. Miao, S. Dong, and F. Li, “Excitation of fundamental shear horizontal wave by using face-shear (d36) piezoelectric ceramics,” Journal of Applied Physics, vol. 119, no. 17, article 174101, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Kim and J.-H. Lee, “Self-moving cell linear motor using piezoelectric stack actuators,” Smart Materials and Structures, vol. 14, no. 5, pp. 934–940, 2005. View at Publisher · View at Google Scholar · View at Scopus
  35. T. T. Zhang, Z. F. Shi, and B. F. Spencer Jr, “Vibration analysis of a functionally graded piezoelectric cylindrical actuator,” Smart Materials and Structures, vol. 17, no. 2, article 025018, 2008. View at Publisher · View at Google Scholar · View at Scopus
  36. H. S. Kim, J.-H. Kim, and J. Kim, “A review of piezoelectric energy harvesting based on vibration,” International Journal of Precision Engineering and Manufacturing, vol. 12, no. 6, pp. 1129–1141, 2011. View at Publisher · View at Google Scholar · View at Scopus
  37. J. Liang and W.-H. Liao, “Energy flow in piezoelectric energy harvesting systems,” Smart Materials and Structures, vol. 20, no. 1, article 015005, 2010. View at Google Scholar
  38. Y. C. Shu, I. C. Lien, and W. J. Wu, “An improved analysis of the SSHI interface in piezoelectric energy harvesting,” Smart Materials and Structures, vol. 16, no. 6, pp. 2253–2264, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. H. J. Song, Y. T. Choi, G. Wang, and N. M. Wereley, “Energy harvesting utilizing single crystal PMN-PT material and application to a self-powered accelerometer,” Journal of Mechanical Design, vol. 131, no. 9, article 091008, 2009. View at Publisher · View at Google Scholar · View at Scopus
  40. F. Ewere, G. Wang, and B. Cain, “Experimental investigation of galloping piezoelectric energy harvesters with square bluff bodies,” Smart Materials and Structures, vol. 23, no. 10, article 104012, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. H. A. Sodano, A. Erturk, J. M. Renno, and D. J. Inman, “Modeling of piezoelectric energy harvesting from an L-shaped beam-mass structure with an application to UAVs,” Journal of Intelligent Material Systems and Structures, vol. 20, no. 5, pp. 529–544, 2009. View at Publisher · View at Google Scholar · View at Scopus
  42. Y.-H. Hsu and C.-K. Lee, “Targeted origin placement for the autonomous gain-phase tailoring of piezoelectric sensors,” Smart Materials and Structures, vol. 11, no. 3, pp. 444–458, 2002. View at Publisher · View at Google Scholar · View at Scopus
  43. W. J. Staszewski, “Structural health monitoring using guided ultrasonic waves,” in Advances in Smart Technologies in Structural Engineering. Computational Methods in Applied Sciences, vol 1, J. Holnicki-Szulc and C. M. Soares, Eds., pp. 117–162, Springer, Berlin, Heidelberg, 2004. View at Publisher · View at Google Scholar
  44. Q. Kong, R. Robert, P. Silva, and Y. Mo, “Cyclic crack monitoring of a reinforced concrete column under simulated pseudo-dynamic loading using piezoceramic-based smart aggregates,” Applied Sciences, vol. 6, no. 11, p. 341, 2016. View at Publisher · View at Google Scholar · View at Scopus
  45. L. F. Li, B. Xu, and J. M. Chen, “Damage monitoring for a Rc shear wall under rapid cyclic loading with embedded smart aggregates,” Proceedings of the Eleventh International Symposium on Structural Engineering, vol. I and Ii, pp. 1432–1437, 2010. View at Google Scholar
  46. S. Gupta, J. Gonzalez, and K. J. Loh, “Damage detection using smart concrete engineered with nanocomposite cement-aggregate interfaces,” Structural Health Monitoring 2015: System Reliability for Verification and Implementation, Vols. 1 and 2, pp. 3033–3040, 2015, http://www.dpi-proceedings.com/index.php/SHM2015/article/view/1037. View at Publisher · View at Google Scholar
  47. C. Zhang, X. Yu, L. Alexander, Y. Zhang, R. Rajamani, and N. Garg, “Piezoelectric active sensing system for crack detection in concrete structure,” Journal of Civil Structural Health Monitoring, vol. 6, no. 1, pp. 129–139, 2016. View at Publisher · View at Google Scholar · View at Scopus
  48. Q. Kong, Q. Feng, and G. Song, “Water presence detection in a concrete crack using smart aggregates,” International Journal of Smart and Nano Materials, vol. 6, no. 3, pp. 149–161, 2015. View at Publisher · View at Google Scholar · View at Scopus
  49. D. Zou, T. Liu, Y. Huang, F. Zhang, C. Du, and B. Li, “Feasibility of water seepage monitoring in concrete with embedded smart aggregates by P-wave travel time measurement,” Smart Materials and Structures, vol. 23, no. 6, article 067003, 2014. View at Publisher · View at Google Scholar · View at Scopus
  50. Q. Feng, Q. Kong, L. Huo, and G. Song, “Crack detection and leakage monitoring on reinforced concrete pipe,” Smart Materials and Structures, vol. 24, no. 11, article 115020, 2015. View at Publisher · View at Google Scholar · View at Scopus
  51. T. Liu, Y. Huang, D. Zou, J. Teng, and B. Li, “Exploratory study on water seepage monitoring of concrete structures using piezoceramic based smart aggregates,” Smart Materials and Structures, vol. 22, no. 6, article 065002, 2013. View at Publisher · View at Google Scholar · View at Scopus
  52. Q. Kong, R. Wang, G. Song, Z. J. Yang, and B. Still, “Monitoring the soil freeze-thaw process using piezoceramic-based smart aggregate,” Journal of Cold Regions Engineering, vol. 28, no. 2, article 06014001, 2014. View at Publisher · View at Google Scholar · View at Scopus
  53. K. Chung, S. Kharkovsky, Q. Kong, and G. Song, “Cure-state monitoring of concrete and mortar specimens using smart aggregates,” in 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, pp. 304–308, Montevideo, Uruguay, May 2014. View at Publisher · View at Google Scholar · View at Scopus
  54. H. Yin, T. Wang, D. Yang, S. Liu, J. Shao, and Y. Li, “A smart washer for bolt looseness monitoring based on piezoelectric active sensing method,” Applied Sciences, vol. 6, no. 11, p. 320, 2016. View at Publisher · View at Google Scholar · View at Scopus
  55. J. Shao, T. Wang, H. Yin, D. Yang, and Y. Li, “Bolt looseness detection based on piezoelectric impedance frequency shift,” Applied Sciences, vol. 6, no. 10, p. 298, 2016. View at Publisher · View at Google Scholar · View at Scopus
  56. J. Wu, Q. Kong, W. Li, I. Lim, and G. Song, “Interlayer slide detection using piezoceramic smart aggregates based on active sensing approach,” IEEE Sensors Journal, vol. 17, no. 19, pp. 6160–6166, 2017. View at Publisher · View at Google Scholar · View at Scopus
  57. G. Song, H. Gu, and Y.-L. Mo, “Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a review,” Smart Materials and Structures, vol. 17, no. 3, article 033001, 2008. View at Publisher · View at Google Scholar · View at Scopus
  58. G. Song, H. Gu, and Y. L. Mo, “Smart aggregates: a distributed intelligent multi-purpose sensor network (DIMSN) for civil structures,” in 2007 IEEE International Conference on Networking, Sensing and Control, pp. 775–780, London, UK, April 2007. View at Publisher · View at Google Scholar · View at Scopus
  59. B. Xu, T. Zhang, G. Song, and H. Gu, “Active interface debonding detection of a concrete-filled steel tube with piezoelectric technologies using wavelet packet analysis,” Mechanical Systems and Signal Processing, vol. 36, no. 1, pp. 7–17, 2013. View at Publisher · View at Google Scholar · View at Scopus
  60. G. Song, H. Gu, Y. L. Mo, T. T. C. Hsu, and H. Dhonde, “Concrete structural health monitoring using embedded piezoceramic transducers,” Smart Materials and Structures, vol. 16, no. 4, pp. 959–968, 2007. View at Publisher · View at Google Scholar · View at Scopus
  61. L. Yabin, L. Dongsheng, P. Seyed Mohammad, K. Qingzhao, L. Ing, and S. Gangbing, “Bond-slip detection of concrete-encased composite structure using electro-mechanical impedance technique,” Smart Materials and Structures, vol. 25, no. 9, article 095003, 2016. View at Publisher · View at Google Scholar · View at Scopus
  62. T. Jiang, Q. Kong, W. Wang, L. Huo, and G. Song, “Monitoring of grouting compactness in a post-tensioning tendon duct using piezoceramic transducers,” Sensors, vol. 16, no. 8, p. 1343, 2016. View at Publisher · View at Google Scholar · View at Scopus
  63. I. Lillamand, J.-F. Chaix, M.-A. Ploix, and V. Garnier, “Acoustoelastic effect in concrete material under uni-axial compressive loading,” NDT & E International, vol. 43, no. 8, pp. 655–660, 2010. View at Publisher · View at Google Scholar · View at Scopus