Table of Contents
Journal of Structures
Volume 2013, Article ID 756253, 9 pages
http://dx.doi.org/10.1155/2013/756253
Research Article

Research on the Behavior of the Steel Plated Shear Wall by Finite Element Method

1Department of Civil Engineering, Shahid Rajaee Teacher Training University, Tehran 16788-15811, Iran
2School of Civil Engineering, University of Tehran, Tehran 11265-4563, Iran
3Department of Civil Engineering, West Tehran Branch, Islamic Azad University, Tehran 14619-88631, Iran

Received 26 February 2013; Accepted 13 May 2013

Academic Editor: Zhongwei Guan

Copyright © 2013 S. M. R. Mortazavi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Basler, “Strength of plate girders in shear,” ASCE Journal of the Structural Division, vol. 87, no. 7, pp. 150–180, 1961. View at Google Scholar
  2. P. A. Timler and G. L. Kulak, “Experimental study of steel plate shear walls,” Structural Engineering Report No. 114, Department of Civil Engineering University of Alberta, Edmonton, Alberta, Canada, 1983. View at Google Scholar
  3. R. G. Driver, G. L. Kulak, A. E. Elwi, and D. J. L. Kennedy, “FE and simplified models of steel plate shear wall,” Journal of Structural Engineering, vol. 124, no. 2, pp. 121–130, 1998. View at Google Scholar · View at Scopus
  4. A. S. Lubell, H. G. L. Prion, C. E. Ventura, and M. Rezai, “Unstiffened steel plate shear wall performance under cyclic loading,” Journal of Structural Engineering, vol. 126, no. 4, pp. 453–460, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Elgaaly and Y. Liu, “Analysis of thin-steel-plate shear walls,” Journal of Structural Engineering, vol. 123, no. 11, pp. 1487–1496, 1997. View at Google Scholar · View at Scopus
  6. A. Astaneh-Asl, Seismic Behavior and Design of Steel Sheer Walls, Structural Steel Educational Council Technical Information and Product Service, 2001.
  7. NBCC, National Building Code of Canada, Ontario, Canada, 2010.
  8. American Institute of Steel Construction, “Seismic provision for structural steel building,” AISC 341-05, ANSI, Washington, DC, USA, 2005. View at Google Scholar
  9. L. J. Thorburn, G. L. Kulak, and C. J. Montgomery, “Analysis of steel plate shear walls,” Structural Engineering Report No. 107, Department of Civil Engineering, University of Alberta, Alberta, Canada, 1983. View at Google Scholar
  10. P. A. Timler, “Design procedures development, analytical verification and cost valuation of steel plate shear wall structures,” Earthquake Engineering Research Facility Technical Report No. 98-01, Department of Civil Engineering, University of British Columbia, Vancouver, British Columbia, Canada, 1998. View at Google Scholar
  11. ANSYS, Finite Element Method Software, SAS IP, Release 5. 6, 1999.
  12. ATC-24, Guidelines of Cyclic Seismic Testing on Components For Steel Structures, Applied Technology Council, Redwood City, Calif, USA, 1992.