Table of Contents
Journal of Structures
Volume 2014 (2014), Article ID 908415, 10 pages
http://dx.doi.org/10.1155/2014/908415
Research Article

Numerical Analysis of Eccentrically Loaded Cold-Formed Plain Channel Columns

National Institute of Technology, Tiruchirappalli 620015, India

Received 20 February 2014; Revised 20 May 2014; Accepted 26 May 2014; Published 24 June 2014

Academic Editor: Lucio Nobile

Copyright © 2014 A. P. Nivethitha et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. Kalyanaraman and P. Ramakrishna, “Non-uniformly compressed stiffened elements,” in Proceedings of the 7th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, Mo, USA, 1984.
  2. V. Kalyanaraman and P. Jayabalan, “Local buckling of stiffened and unstiffened elements under nonuniform compression,” in Proceedings of the 12th International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 1–9, St. Loutis, Mo, USA, October 1994. View at Scopus
  3. A. I. El-Sheikh, E. M. A. El-Kassas, and R. I. Mackie, “Performance of stiffened and unstiffened cold-formed channel members in axial compression,” Engineering Structures, vol. 23, no. 10, pp. 1221–1231, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. B. W. Schafer, Z. Li, and C. D. Moen, “Computational modeling of cold-formed steel,” Thin-Walled Structures, vol. 48, no. 10-11, pp. 752–762, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Young and J. Yan, “Channel columns undergoing local, distortional, and overall buckling,” Journal of Structural Engineering, vol. 128, no. 6, pp. 728–736, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. B. Young and J. Yan, “Finite element analysis and design of fixed-ended plain channel columns,” Finite Elements in Analysis and Design, vol. 38, no. 6, pp. 549–566, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. B. Young and K. J. R. Rasmussen, “Behaviour of cold-formed singly symmetric columns,” Thin-Walled Structures, vol. 33, no. 2, pp. 83–102, 1999. View at Google Scholar · View at Scopus
  8. H. T. Nguyen and S. E. Kim, “Buckling of composite columns of lipped-channel and hat sections with web stiffener,” Thin-Walled Structures, vol. 47, no. 11, pp. 1149–1160, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. C. G. Wang, Z. F. Xu, Z. N. Zhang, and Y. F. Cao, “Load-carrying capacity of cold-formed steel columns with complicated section under eccentric compression loading,” Advanced Materials Research, vol. 838–841, pp. 601–604, 2013. View at Google Scholar
  10. T. H. Miller and T. Pekoz, “Load-eccentricity effects on cold-formed steel lipped-channel columns,” Journal of Structural Engineering, vol. 120, no. 3, pp. 805–823, 1994. View at Google Scholar · View at Scopus
  11. J. Rhodes, M. Macdonald, and W. McNiff, “Buckling of cold formed stainless steel columns under concentric and eccentric loading,” in Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 687–699, St. Louis, Mo, USA, October 2000. View at Scopus
  12. J. Dejin and C. Shaofan, “Inelastic torsional-flexural buckling of cold-formed open sections under eccentric load,” in Proceedings of the 7th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, Mo, USA, 1984.
  13. B. W. Schafer, “Review: The Direct Strength Method of cold-formed steel member design,” Journal of Constructional Steel Research, vol. 64, no. 7-8, pp. 766–778, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. B. W. Schafer and S. Adany, “Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods,” in Proceedings of the 18th International Specialty Conference on Cold-Formed Steel Structures: Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 39–54, October 2006. View at Scopus
  15. P. Jayabalan, Behaviour of non uniformly compressed thin unstiffened elements [Ph.D. thesis], Deptartment of Civil Engineering, India Institute of Technology Madras, 1989.