Table of Contents
Journal of Waste Management
Volume 2014 (2014), Article ID 389316, 7 pages
http://dx.doi.org/10.1155/2014/389316
Research Article

Utilization of Brine Sludge in Nonstructural Building Components: A Sustainable Approach

Environmental Science & Technology Division, CSIR-Central Building Research Institute, Roorkee 247 667, India

Received 29 May 2014; Accepted 5 August 2014; Published 21 August 2014

Academic Editor: Milva Pepi

Copyright © 2014 Mridul Garg and Aakanksha Pundir. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Balasubramanian, P. C. Sabumon, J. U. Lazar, and R. Ilangovan, “Reuse of textile effluent treatment plant sludge in building materials,” Waste Management, vol. 26, no. 1, pp. 22–28, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. Xue, S. Wu, H. Hou, and J. Zha, “Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture,” Journal of Hazardous Materials, vol. 138, no. 2, pp. 261–268, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. P. Ahmedzade and B. Sengoz, “Evaluation of steel slag coarse aggregate in hot mix asphalt concrete,” Journal of Hazardous Materials, vol. 165, no. 1–3, pp. 300–305, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Maslehuddin, A. M. Sharif, M. Shameem, M. Ibrahim, and M. S. Barry, “Comparison of properties of steel slag and crushed limestone aggregate concretes,” Construction and Building Materials, vol. 17, no. 2, pp. 105–112, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. W. Shen, M. Zhou, W. Ma, J. Hu, and Z. Cai, “Investigation on the application of steel slag-fly ash-phosphogypsum solidified material as road base material,” Journal of Hazardous Materials, vol. 164, no. 1, pp. 99–104, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Saxena, V. Sorna Gowri, J. Prabhakar, and T. Sangeetha, “Innovative building materials: polymer composites, copper tailing bricks, and blue dust primers,” Civil Engineering & Construction Review, vol. 15, pp. 46–50, 2002. View at Google Scholar
  7. N. J. Saikia, P. Sengupta, P. K. Gogoi, and P. C. Borthakur, “Cementitious properties of metakaolin-normal Portland cement mixture in the presence of petroleum effluent treatment plant sludge,” Cement and Concrete Research, vol. 32, no. 11, pp. 1717–1724, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. N. J. Saikia, P. Sengupta, P. K. Gogoi, and P. C. Borthakur, “Hydration behaviour of lime-co-calcined kaolin-petroleum effluent treatment plant sludge,” Cement and Concrete Research, vol. 32, no. 2, pp. 297–302, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. “CPCB Report on ‘Review of Environmental standards of Caustic Soda industry (Membrane cell) and preparation of COINDS on Caustic soda’,” 2013.
  10. F. P. Glasser, “Fundamental aspects of cement solidification and stabilisation,” Journal of Hazardous Materials, vol. 52, no. 2-3, pp. 151–170, 1997. View at Publisher · View at Google Scholar · View at Scopus
  11. A. T. Lima, L. M. Ottosen, and A. B. Ribeiro, “Assessing fly ash treatment: remediation and stabilization of heavy metals,” Journal of Environmental Management, vol. 95, pp. S110–S115, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. O. D. Whitescarver, J. T. Kwan, M. K. Chan, and D. P. Hoyer, “Process for using sludge from geothermal brine to make concrete and concrete composition,” U.S Patent Number: 4,900,360, 1990.
  13. D. I. Kaplan, K. Roberts, J. Coates, M. Siegfried, and S. Serkiz, Saltstone and Concrete Interactions with Radionuclides: Sorption (Kd), Desorption, and Reduction Capacity Measurements, United States Department of Energy, Savannah River Site, SC, USA, 2008.
  14. R. Zentar, D. Wang, N. E. Abriak, M. Benzerzour, and W. Chen, “Utilization of siliceous-aluminous fly ash and cement for solidification of marine sediments,” Construction and Building Materials, vol. 35, pp. 856–863, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. IS, “Methods of chemical analysis of hydraulic cement,” IS 4032-2005, Bureau of Indian Standards, New Delhi, India, 2005. View at Google Scholar
  16. IS: 3812-2003, Specification for Fly ash for Use as Pozzolana and Admixture, Bureau of Indian Standards, New Delhi, India.
  17. IS, “Methods of test for Pozzolanic materials,” IS 1727-2004, Bureau of Indian Standards, New Delhi, India, 2004. View at Google Scholar
  18. “Indian standard methods of test for aggregates for concrete,” IS: 2386-1963, (Part 1, 3, 4), Bureau of Indian Standards, New Delhi, India.
  19. IS: 4031-2005, Methods of Physical Tests for Hydraulic Cements, Bureau of Indian Standards, New Delhi, India, 2005.
  20. IS: 6909-2004, Specification for supersulphated cement, Bureau of Indian Standards, New Delhi, India.
  21. M. Garg and A. Pundir, “Investigation of properties of fluorogypsum-slag composite binders-hydration, strength and microstructure,” Cement and Concrete Composites, vol. 45, pp. 227–233, 2014. View at Google Scholar
  22. IS, “Precast concrete blocks for paving-specification,” IS 15658-2006, Bureau of Indian Standards, New Delhi, India, 2006. View at Google Scholar
  23. “Fly Ash—lime bricks—specification,” IS: 12894-1999, Bureau of Indian Standards, New Delhi, India.
  24. IS: 4139-1989, Specification for calcium silicate bricks, Bureau of Indian Standards, New Delhi, India.
  25. M. Garg and A. Pundir, “Comprehensive study of fly ash binder developed with fly ash—alpha gypsum plaster—Portland cement,” Construction and Building Materials, vol. 37, pp. 758–765, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Garg, N. Rani, and A. Pundir, “Utilization of steel slag in construction materials,” New Building Materials Construction World, vol. 19, pp. 163–166, 2014. View at Google Scholar
  27. ASTM, “Standard test method for shake extraction of solid waste with water,” ASTM D3987-85, ASTM International, West Conshohocken, Pa, USA, 2004. View at Google Scholar
  28. IS:10500-2012, Standards for Discharge of Environmental Pollutants in Inland Surface Water, Bureau of Indian Standards, New Delhi, India, 2012.