Editorial Board
Chief Editor
- Andrea Tridello
, Politecnico di Torino, Italy
Academic Editors
- José A.F.O. Correia, University of Porto, Portugal
- Joseph Absi, Centre Européen de la Céramique Groupe d'Etude des Matériaux Hétérogènes Ecole Nationale Supérieure de Céramique Industrielle, France
- Majid R. Ayatollahi, Fatigue and Fracture LabDepartment of Mechanical EngineeringIran University of Science and Technology, Iran
- Sara Bagherifard, Politecnico di Milano, Department of Mechanical Engineering, Via La Masa, 34, 20156 Milan, Italy, Italy
- Hamid Reza Bakhsheshi-Rad, UTM, Malaysia
- Matteo Benedetti, University of Trento, Italy
- Filippo Berto, Sapienza University of Rome, Rome, Italy
- Ricardo Branco, University of Coimbra, Portugal
- K.C. Chan, The Hong Kong Polytechnic University, China
- Sergio Cicero, Univ Cantabria Avda Castros S N E 39005 Santander Spain, Spain
- Anton Du Plessis, CT Scanner Facility Central Analytical Facilities University of Stellenbosch, South Africa
- Juergen Eckert, Montanuniversität Leoben and Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Austria
- Paolo Ferro, University of Padova , Italy
- Chao Gao, Norwegian University of Science and Technology, Norway
- Josef Kiendl, Bundeswehr University Munich, Germany
- An-Tonios Kontsos, Theoretical and Applied Mechanics Group Department of Mechanical Engineering and Mechanics Drexel University, USA
- Andrei Kotousov, School of Mechanical EngineeringThe University of Adelaide, Australia
- Grzegorz Lesiuk, Wroclaw University of Science and Technology, Poland
- Thomas J Marrow, Department of Materials University of Oxford , United Kingdom
- Liviu Marsavina, Timisoara University, Romania
- Pavlo Maruschak, Ternopil Ivan Puluj National Technical University, Ukraine
- Minoo Naebe, Carbon Nexus Facility Institute for Frontier Materials Deakin University, Australia
- S. Pantelakis, Laboratory of Technology and Strength of MaterialsDepartment of Mechanical Engineering and AeronauticsUniversity of Patras, Greece
- Davide Paolino, Department of Mechanics Polytechnical School of Turin, Italy
- Mirco Peron, NTNU, Norway
- Konda Gokuldoss Prashanth, Additive Manufacturing Center, Sandvik AB , Sweden
- John Provine, Standford University, USA
- Kumbakonam Ramamani Rajagopal, Texas A and M University, USA
- Nima Razavi, Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Norway
- Luis Reis, Universidade de Lisboa, Portugal
- Richard Russell, NASA, USA
- Enrico Salvati, University of Udine, United Kingdom
- Aleksandar Sedmak, University of Belgrade, Faculty of Mechanical Engineering, Serbia
- Nima Shamsaei, Laboratory for Fatigue & Additive Manufacturing Excellence (FAME) Department of Mechanical Engineering Auburn University, USA
- Challapalli Suryanarayana, Department of Mechanical and Aerospace Engineering University of Central Florida Orlando Florida 32816 2450 USA and Department of Materials Science and Engineering University of Central Florida Orlando Florida 32816 2450 USA, USA
- Lucas Susmel, Department of Civil and Structural Engineering The University of Sheffield , United Kingdom
- Chak-yin Tang, The Hong Kong Polytechnic University, Hong Kong
- Jan Torgersen, Norwegian University of Science and Technology , Norway
- Kim Vanmeensel, Department of Materials Engineering Katholieke Universiteit Leuven , Belgium
- Haohui Xin, Xi'an Jiaotong University, United Kingdom
- Xiao-Ping Zhou, Department of Civil Engineering, School of Civil Engineering, Chongqing University, Shazheng Road, Shapingba District, Chongqing 400045, China, China
- Shun-Peng Zhu, University of Electronic Science and Technology of China, China
Publishing Collaboration
More info
Journal metricsAcceptance rate15%
Submission to final decision67 days
Acceptance to publication16 days
CiteScore4.400
Journal Citation Indicator-
Impact Factor-
Submit
Check your manuscript for errors before submitting
