Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2006, Article ID 56876, 30 pages
http://dx.doi.org/10.1155/MPE/2006/56876

An overview of constitutive models for shape memory alloys

Department of Mechanical Engineering, Alberto Luiz Coimbra Institute-Graduate School and Research in Engineering (COPPE), Federal University of Rio de Janeiro, P.O. Box 68.503, Rio de Janeiro, RJ 21941-972, Brazil

Received 1 September 2004; Revised 27 September 2005; Accepted 5 October 2005

Copyright © 2006 Alberto Paiva and Marcelo Amorim Savi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Abeyaratne, S. J. Kim, and J. K. Knowles, “A one-dimensional continuum model for shape-memory alloys,” International Journal of Solids and Structures, vol. 31, no. 16, pp. 2229–2249, 1994. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  2. R. Abeyaratne, S. J. Kim, and J. K. Knowles, “Continuum modeling of shape memory alloys,” in Mechanics of Phase Transformations and Shape Memory Alloys, pp. 59–69, ASME, New York, 1994a.
  3. M. Achenbach and I. A. Müller, “A model for shape memory,” Journal de Physique, vol. 12, no. 43, pp. 163–167, 1982. View at Google Scholar
  4. W. S. Anders, C. A. Rogers, and C. R. Fuller, “Vibration and low-frequency acoustic analysis of piecewise-activated adaptive composite panels,” Journal of Composite Materials, vol. 26, pp. 103–120, 1992. View at Google Scholar
  5. F. Auricchio and J. Lubliner, “A uniaxial model for shape memory alloys,” International Journal of Solids and Structures, vol. 34, no. 27, pp. 3601–3618, 1997. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  6. F. Auricchio and E. Sacco, “A one-dimensional model for superelastic shape memory alloys with different elastic properties between austenite and martensite,” International Journal of Non-Linear Mechanics, vol. 32, no. 6, pp. 1101–1114, 1997. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  7. F. Auricchio, R. L. Taylor, and J. Lubliner, “Shape-memory alloys: macromodeling and numerical simulations of the superelastic behavior,” Computer Methods in Applied Mechanics and Engineering, vol. 146, no. 3-4, pp. 281–312, 1997. View at Publisher · View at Google Scholar
  8. A. P. Baêta-Neves, M. A. Savi, and P. M. C. L. Pacheco, “On the fremond's constitutive model for shape memory alloys,” Mechanics Research Communications, vol. 31, no. 6, pp. 677–688, 2004. View at Google Scholar
  9. A. Bertran, “Thermo-mechanical constitutive equations for the description of shape memory effects in alloys,” Nuclear Engineering and Design, vol. 74, no. 2, pp. 173–182, 1982. View at Publisher · View at Google Scholar
  10. V. Birman, “Review of mechanics of shape memory alloys structures,” Applied Mechanics Review, vol. 50, no. 11, pp. 629–645, 1997. View at Google Scholar
  11. Z. H. Bo and D. C. Lagoudas, “Thermomechanical modeling of polycrystalline SMAs under cyclic loading. Part III: evolution of plastic strains and two-way shape memory effect,” International Journal of Engineering Science, vol. 37, no. 9, pp. 1175–1203, 1999. View at Publisher · View at Google Scholar
  12. J. G. Boyd and D. C. Lagoudas, “A thermodynamic constitutive model for the shape memory materials. Part I: the monolithic shape memory alloys,” International Journal of Plasticity, vol. 12, no. 6, pp. 805–842, 1996. View at Publisher · View at Google Scholar
  13. L. C. Brinson, “One dimensional constitutive behavior of shape memory alloys: themomechanical derivation with non-constant material functions and redefined martensite internal variable,” Journal of Intelligent Material Systems and Structures, no. 4, pp. 229–242, 1993. View at Google Scholar
  14. S. B. Choi, Y. M. Han, J. H. Kim, and C. C. Cheong, “Force tracking of a flexible gripper featuring shape memory alloys actuators,” Mechatronics, vol. 11, no. 6, pp. 677–690, 2001. View at Publisher · View at Google Scholar
  15. R. J. Comstock Jr., T. E. Buchheit, M. Somerday, and J. A. Wert, “Modeling the transformation stress of constrained shape memory alloys single crystals,” ACTA Materialia, vol. 44, no. 9, pp. 3505–3514, 1996. View at Publisher · View at Google Scholar
  16. I. Dobovsek, “On formal structure of constitutive equations for materials exhibiting shape memory effects, shape memory materials,” Materials Science Forum, vol. 327, no. 3, pp. 359–362, 2000. View at Google Scholar
  17. F. Falk, “Model free-energy, mechanics and thermodynamics of shape memory alloys,” ACTA Metallurgica, vol. 28, no. 12, pp. 1773–1780, 1980. View at Publisher · View at Google Scholar
  18. F. Falk, “One-dimensional model of shape memory alloys,” Archives of Mechanics, vol. 35, no. 1, pp. 63–84, 1983. View at Google Scholar
  19. F. Falk and P. Konopka, “Three-dimensional Landau theory describing the martensitic transformation of shape memory alloys,” Journal de Physique, no. 2, pp. 61–77, 1990. View at Google Scholar
  20. F. D. Fischer, E. R. Oberaigner, K. Tanaka, and F. Nishimura, “Transformation induced plasticity revised: an updated formulation,” International Journal of Solids and Structures, vol. 35, no. 18, pp. 2209–2227, 1998. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  21. F. D. Fischer and K. Tanaka, “A micromechanical model for the kinetics of martensitic transformation,” International Journal of Solids and Structures, vol. 29, no. 14-15, pp. 1723–1728, 1992. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  22. M. Fremond, “Matériaux à Mémoire de Forme,” Comptes Rendus Mathematique. Academie de Sciences. Paris, vol. 304, s.II, no. 7, pp. 239–244, 1987. View at Google Scholar
  23. M. Fremond, “Shape memory alloy: a thermomechanical macroscopic theory,” CISM Courses and Lectures, no. 351, pp. 3–68, Springer, New York, 1996. View at Google Scholar
  24. H. Funakubo, Shape Memory Alloys, Gordon & Bleach, New York, 1987.
  25. K. Gall, H. Sehitoglu, R. Anderson, I. Karaman, Y. I. Chumlyakov, and I. V. Kireeva, “On the mechanical behavior of single crystal Ni-Ti shape memory alloys and related polycrystalline phenomenon,” Materials Science and Engineering, vol. A317, pp. 85–92, 2001. View at Google Scholar
  26. K. Gall, H. Sehitoglu, Y. I. Chumlyakov, and I. V. Kireeva, “Tension-compression asymmetry of the stress-strain response in aged single crystal and polycrystalline NiTi,” ACTA Materialia, vol. 47, no. 4, pp. 1203–1217, 1999. View at Publisher · View at Google Scholar
  27. B. C. Goo and C. Lexcellent, “Micromechanics-based modeling of two-way memory effect of a single-crystalline shape-memory alloy,” ACTA Materialia, vol. 45, no. 2, pp. 727–737, 1997. View at Publisher · View at Google Scholar
  28. S. Govindjee and G. J. Hall, “A computational model for shape memory alloys,” International Journal of Solids and Structures, vol. 37, no. 5, pp. 735–760, 2000. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  29. S. Govindjee and E. P. Kasper, “A shape memory alloy model for uranium-niobium accounting for plasticity,” Journal of Intelligent Material Systems and Structures, vol. 8, pp. 815–826, 1997. View at Google Scholar
  30. D. A. Hebda and S. R. White, “Effect of training conditions and extended thermal cycling on nitinol two-way shape memory behavior,” Smart Materials and Structures, vol. 4, no. 4, pp. 298–304, 1995. View at Publisher · View at Google Scholar
  31. D. E. Hodgson and J. W. Brown, Using Nitinol Alloys, Shape Memory Applications, California, 2000.
  32. Y. Ivshin and T. J. Pence, “A constitutive model for hysteretic phase transition behavior,” International Journal of Engineering Science, vol. 32, no. 4, pp. 681–704, 1994. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  33. Y. Ivshin and T. J. Pence, “A thermomechanical model for a one variant shape memory material,” Journal of Intelligent Material Systems and Structures, no. 5, pp. 455–473, 1994b. View at Google Scholar
  34. P. Kloucek, D. R. Reynolds, and T. I. Seidman, “Computational modeling of vibration damping in SMA wires,” Continuum Mechanics and Thermodynamics, vol. 16, no. 5, pp. 495–514, 2004. View at Google Scholar · View at MathSciNet
  35. P. K. Kumar, D. C. Lagoudas, and P. B. Entchev, “Thermomechanical characterization SMA actuators under cyclic loding,” in Proccedings of the ASME - International Mechanical Engineering Congress and R & D Expo, Washington, November 2003.
  36. C. A. P. L. La Cava, E. P. Silva, L. G. Machado, P. M. C. L. Pacheco, and M. A. Savi, “Modeling of a shape memory preload device for bolted joints,” in Proceedings of National Congress of Mechanical Engineering (CONEM 2000 - ABCM), Rio de Janeiro, 2000.
  37. S. Leclercq, G. Bourbon, and C. Lexcellent, “Plasticity like model of martensite phase transition in shape memory alloys,” Journal de Physique IV, vol. 5, pp. 513–518, 1995. View at Google Scholar
  38. J. Lemaitre and J. L. Chaboche, Mechanics of Solid Materials, Cambridge University Press, Cambridge, 1990. View at Zentralblatt MATH
  39. V. I. Levitas, A. V. Idesman, E. Stein, J. Spielfeld, and E. Hornbogen, “A simple micromechanical model for pseudoelastic behavior of CuZnAl alloy,” Journal of Intelligent Material Systems and Structures, no. 5, pp. 324–334, 1998. View at Google Scholar
  40. C. Lexcellent, S. Leclercq, B. Gabry, and G. Bourbon, “The two-way shape memory effect of shape memory alloys: an experimental study and a phenomenological model,” International Journal of Plasticity, vol. 16, no. 10-11, pp. 1155–1168, 2000. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  41. C. Liang and C. A. Rogers, “One-dimensional thermomechanical constitutive relations for shape memory materials,” Journal of Intelligent Material Systems and Structures, no. 1, pp. 207–234, 1990. View at Google Scholar
  42. T. J. Lim and D. L. McDowell, “Degradation of an Ni-Ti alloy during cyclic loading,” in Proceedings of 1994 North American Conference on Smart Structures and Materials, SPIE, vol. 2189, pp. 326–341, 1994.
  43. Z. K. Lu and G. J. Weng, “A Self-consistent model for the stress-strain behavior of shape-memory alloy polycrystals,” ACTA Materialia, vol. 46, no. 15, pp. 5423–5433, 1998. View at Publisher · View at Google Scholar
  44. L. G. Machado, Chaos in dynamical systems with shape memory and multi-degree of freedom, Master's thesis, 2002.
  45. L. G. Machado and M. A. Savi, “Odontological applications of shape memory alloys,” Revista Brasileira de Odontologia, vol. 59, no. 5, pp. 302–306, 2002. View at Google Scholar
  46. L. G. Machado and M. A. Savi, “Medical applications of shape memory alloys,” Brazilian Journal of Medical and Biological Research, vol. 36, no. 6, pp. 683–691, 2003. View at Publisher · View at Google Scholar
  47. O. Matsumoto, S. Miyazaki, K. Otsuka, and H. Tamura, “Crystallography of martensitic transformation in Ti-Ni single crystals,” ACTA Metallurgica, vol. 35, no. 8, pp. 2137–2144, 1987. View at Publisher · View at Google Scholar
  48. D. A. Miller and D. C. Lagoudas, “Thermomechanical characterization of NiTiCu and NiTi SMA actuators: influence of plastic strains,” Smart Materials and Structures, vol. 9, no. 5, pp. 640–652, 2000. View at Publisher · View at Google Scholar
  49. I. Muller and S. Seelecke, “Thermodynamic aspects of shape memory alloys,” Mathematical and Computer Modelling, vol. 34, no. 12-13, pp. 1307–1355, 2001. View at Publisher · View at Google Scholar
  50. F. Nishimura, N. Watanabe, and K. Tanaka, “Transformation lines in an Fe-based shape memory alloy under tensile and compressive stress states,” Materials Science and Engineering, vol. A22, pp. 134–142, 1996. View at Google Scholar
  51. F. Nishimura, N. Watanabe, and K. Tanaka, “Stress-strain-temperature hysteresis and martensite start line in an Fe-based shape memory alloy,” Materials Science and Engineering. A-Structural Materials Properties Microstructure and Processing, vol. 238, no. 2, pp. 367–376, 1997. View at Google Scholar
  52. Z. Nishiyama, Martensitic Transformation, Academic Press, New York, 1978.
  53. M. Ortiz, P. M. Pinsky, and R. L. Taylor, “Operator split methods for the numerical solution of the elastoplastic dynamic problem,” Computer Methods of Applied Mechanics and Engineering, vol. 39, no. 2, pp. 137–157, 1983. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  54. K. Otsuka and X. Ren, “Recent developments in the research of shape memory alloys,” Intermetallics, vol. 7, no. 5, pp. 511–528, 1999. View at Publisher · View at Google Scholar
  55. P. M. C. L. Pacheco and M. A. Savi, “A non-explosive release device for aerospace applications using shape memory alloys,” in Proceedings of XIV Brazilian Mechanical Engineering Congress, Sao Paulo, December 1997.
  56. A. Paiva, M. A. Savi, A. M. B. Braga, and P. M. C. L. Pacheco, “A constitutive model for shape memory alloys considering tensile-compressive asymmetry and plasticity,” International Journal of Solids and Structures, vol. 42, no. 11-12, pp. 3439–3457, 2005. View at Publisher · View at Google Scholar
  57. J. Perkins, Shape Memory Effects in Alloys, Plenum Press, New York, 1975.
  58. P. Prader and A. C. Kneissl, “Deformation behavior and two-way shape-memory effect of NiTi alloys,” Zeitschrift fur Metallkunde, vol. 88, pp. 410–415, 1997. View at Google Scholar
  59. RAYCHEM—TYCO ELECTRONIC CORPORATION, captured on 04/29/2001, http://www.raychem.com.
  60. O. K. Rediniotis, L. N. Wilson, D. C. Lagoudas, and M. M. Khan, “Development of a shape-memory-alloy actuated biomimetic hydrofoil,” Journal of Intelligent Material Systems and Structures, vol. 13, no. 1, pp. 35–49, 2002. View at Publisher · View at Google Scholar
  61. R. T. Rockafellar, Convex Analysis, Princeton Mathematical Series, no. 28, Princeton University Press, New Jersey, 1970. View at Zentralblatt MATH · View at MathSciNet
  62. C. A. Rogers, “Intelligent materials,” Scientific American, pp. 122–127, 1995. View at Google Scholar
  63. C. A. Rogers, C. Liang, and C. R. Fuller, “Modeling of shape memory alloy hybrid composites for structural acoustic control,” Journal of Acoustic Society of America, vol. 89, no. 1, pp. 210–220, 1991. View at Publisher · View at Google Scholar
  64. M. A. Savi and A. M. Braga, “Chaotic vibration of an oscillator with shape memory,” Journal of the Brazilian Society of Mechanical Science, vol. 15, no. 1, pp. 1–20, 1993. View at Google Scholar
  65. M. A. Savi and A. Paiva, “Describing internal subloops due to incomplete phase transformations in shape memory alloys,” Archive of Applied Mechanics, vol. 74, no. 9, pp. 637–647, 2005. View at Publisher · View at Google Scholar
  66. M. A. Savi, A. Paiva, A. P. Baêta-Neves, and P. M. C. L. Pacheco, “Phenomenological modeling and numerical simulation of shape memory alloys: a thermo-plastic-phase transformation coupled model,” Journal of Intelligent Material Systems and Structures, vol. 13, no. 5, pp. 261–273, 2002. View at Publisher · View at Google Scholar
  67. J. A. Shaw and S. Kyriakides, “Thermomechanical aspects of NiTi,” Journal of the Mechanics and Physics of Solids, vol. 43, no. 8, pp. 1243–1281, 1995. View at Publisher · View at Google Scholar
  68. E. P. Silva, Modelagem Mecânica De Transformações De Fase Induzidas Por Tensões Em Sólidos, Master's thesis, Department of Mechanical Engineering, University of Brasilia, Brasilia, 1995.
  69. J. C. Simo and R. L. Taylor, “A return mapping algorithm for plane stress elastoplasticity,” International Journal for Numerical Methods in Engineering, vol. 22, no. 3, pp. 649–670, 1986. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  70. SINTEF, “Shape Memory Alloys in Oil Well Applications,” 1999. View at Google Scholar
  71. P. Sittner and V. Novák, “Anisotropy of martensitic transformations in modeling of shape memory alloy polycrystals,” International Journal of Plasticity, vol. 16, no. 10-11, pp. 1243–1268, 2000. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  72. P. Sittner, V. Novák, and N. Zárubová, “Martensitic transformations in [001] Cu-Al-Zn-Mn single crystals,” ACTA Materialia, vol. 46, no. 4, pp. 1265–1281, 1998. View at Publisher · View at Google Scholar
  73. P. Sittner, V. Novák, N. Zárubová, and V. Studnicka, “Stress state effect on martensitic structures in shape memory alloys,” Materials Science and Engineering, vol. A273-275, pp. 370–374, 1999. View at Google Scholar
  74. A. C. Souza, E. Mamiya, and N. Zouain, “Three-dimensional model for solids undergoing stress-induced phase transformations,” European Journal of Mechanics - A Solids, vol. 17, no. 5, pp. 789–806, 1998. View at Google Scholar · View at Zentralblatt MATH
  75. Q. P. Sun and K. C. Hwang, “Micromechanics modeling for the constitutive behavior of polycrystalline shape memory alloys—part II. Study of individual phenomenon,” Journal of the Mechanics and Physics of Solids, vol. 41, p. 19, 1993b. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  76. Q. P. Sun and K. C. Hwang, “Micromechanics modeling for the constitutive behavior of polycrystalline shape memory alloys—part I. Derivation of general relations,” Journal of the Mechanics and Physics of Solids, vol. 41, no. 1, pp. 1–17, 1993. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  77. K. Tanaka, “A thermomechanical sketch of shape memory effect: one-dimensional tensile behavior,” Materials Science Research International, vol. 18, p. 251, 1985. View at Google Scholar
  78. K. Tanaka and S. Nagaki, “Thermomechanical description of materials with internal variables in the process of phase transitions,” Ingenieur—Archive, vol. 51, pp. 287–299, 1982. View at Google Scholar · View at Zentralblatt MATH
  79. K. Tanaka, F. Nishimura, and H. Tobushi, “Phenomenological analysis on subloops in shape memory alloys due to incomplete transformations,” Journal of Intelligent Material Systems and Structures, vol. 5, pp. 387–493, 1994. View at Google Scholar
  80. R. Vaidyanathan, H. J. Chiel, and R. D. Quinn, “A hydrostatic robot for marine applications,” Robotics and Autonomous Systems, vol. 30, no. 1-2, pp. 103–113, 2000. View at Publisher · View at Google Scholar
  81. J. van Humbeeck, “Non-medical applications of shape memory alloys,” Materials Science and Engineering A, vol. 273-275, pp. 134–148, 1999. View at Publisher · View at Google Scholar
  82. H. Warlimont, L. Delaey, R. V. Krishnan, and H. Tas, “Thermoelasticity, pseudoelasticity and the memory effects associated with martensitic transformations—part 3: thermodynamics and kinetics,” Journal of Materials Science, vol. 9, no. 9, pp. 1545–1555, 1974. View at Publisher · View at Google Scholar
  83. R. J. Wasilevski, “On the nature of the martensitic transformation,” Mettalurgical Transactions, vol. 6A, pp. 1405–1418, 1975. View at Google Scholar
  84. K. Williams, G. Chiu, and R. Bernhard, “Adaptive-passive absorbers using shape memory alloys,” Journal of Sound and Vibration, vol. 249, no. 5, pp. 835–848, 2002. View at Google Scholar
  85. S. K. Wu and H. C. Lin, “Recent development of NiTi-based shape memory alloys in Twain,” Materials Chemistry and Physics, vol. 64, no. 2, pp. 81–92, 2000. View at Publisher · View at Google Scholar
  86. S. Zhang and P. G. McCormick, “Thermodynamic analysis of shape memory phenomena—I. Effect of transformation plasticity on elastic strain energy,” ACTA Materialia, vol. 48, no. 12, pp. 3081–3089, 2000. View at Publisher · View at Google Scholar
  87. S. Zhang and P. G. McCormick, “Thermodynamic analysis of shape memory phenomena—II. Modelling,” ACTA Materialia, vol. 48, no. 12, pp. 3091–3101, 2000. View at Publisher · View at Google Scholar
  88. X. D. Zhang, C. A. Rogers, and C. Liang, “Modeling of two-way shape memory effect,” in Smart Structures and Material—ASME, pp. 79–90, New York, December 1991.