Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2011 (2011), Article ID 146505, 29 pages
http://dx.doi.org/10.1155/2011/146505
Research Article

A Corotational Finite Element Method Combined with Floating Frame Method for Large Steady-State Deformation and Free Vibration Analysis of a Rotating-Inclined Beam

1Department of Mechanical Engineering, National Chiao Tung University, Hsinchu 300, Taiwan
2Department of Mechanical Engineering, De Lin Institute of Technology, Tucheng 236, Taiwan

Received 30 March 2011; Accepted 19 May 2011

Academic Editor: Delfim Soares Jr.

Copyright © 2011 Ming Hsu Tsai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. J. Schilhansl, “Bending frequency of a rotating cantilever beam,” Journal of Applied Mechanics, vol. 25, pp. 28–30, 1958. View at Google Scholar
  2. R. O. Stafford and V. Giurgiutiu, “Semi-analytic methods for rotating Timoshenko beams,” International Journal of Mechanical Sciences, vol. 17, no. 11-12, pp. 719–727, 1975. View at Google Scholar · View at Scopus
  3. A. Leissa, “Vibrational aspects of rotating turbomachinery blades,” Applied Mechanics Reviews, vol. 34, no. 5, pp. 629–635, 1981. View at Google Scholar · View at Scopus
  4. D. H. Hodges and M. J. Rutkowski, “Free-vibration analysis of rotating beams by a variable-order finite-element method,” AIAA Journal, vol. 19, no. 11, pp. 1459–1466, 1981. View at Google Scholar · View at Scopus
  5. A. D. Wright, C. E. Smith, R. W. Thresher, and J. L. C. Wang, “Vibration modes of centrifugally stiffened beams,” Journal of Applied Mechanics, vol. 49, no. 1, pp. 197–202, 1982. View at Google Scholar · View at Scopus
  6. K. B. Subrahmanyam and K. R. V. Kaza, “Non-linear flap-lag-extensional vibrations of rotating, pretwisted, preconed beams including Coriolis effects,” International Journal of Mechanical Sciences, vol. 29, no. 1, pp. 29–43, 1987. View at Google Scholar · View at Scopus
  7. T. Yokoyama, “Free vibration characteristics of rotating Timoshenko beams,” International Journal of Mechanical Sciences, vol. 30, no. 10, pp. 743–755, 1988. View at Google Scholar · View at Scopus
  8. M. R. M. da Silva, C. L. Zaretzky, and D. H. Hodges, “Effects of approximations on the static and dynamic response of a cantilever with a tip mass,” International Journal of Solids and Structures, vol. 27, no. 5, pp. 565–583, 1991. View at Google Scholar · View at Scopus
  9. S. Y. Lee and Y. H. Kuo, “Bending frequency of a rotating beam with an elastically restrained root,” Journal of Applied Mechanics, vol. 58, no. 1, pp. 209–214, 1991. View at Google Scholar · View at Scopus
  10. H. P. Lee, “Vibration on an inclined rotating cantilever beam with tip mass,” Journal of Vibration and Acoustics, vol. 115, pp. 241–245, 1993. View at Google Scholar
  11. S. Naguleswaran, “Lateral Vibration of a centrifugally tensioned uniform Euler-Bernoulli beam,” Journal of Sound and Vibration, vol. 176, no. 5, pp. 613–624, 1994. View at Publisher · View at Google Scholar · View at Scopus
  12. M. R. M. Crespo Da Silva, “A comprehensive analysis of the dynamics of a helicopter rotor blade,” International Journal of Solids and Structures, vol. 35, no. 7-8, pp. 619–635, 1998. View at Google Scholar · View at Scopus
  13. H. H. Yoo and S. H. Shin, “Vibration analysis of rotating cantilever beams,” Journal of Sound and Vibration, vol. 212, no. 5, pp. 807–828, 1998. View at Google Scholar · View at Scopus
  14. A. Bazoune, Y. A. Khulief, N. G. Stephen, and M. A. Mohiuddin, “Dynamic response of spinning tapered Timoshenko beams using modal reduction,” Finite Elements in Analysis and Design, vol. 37, no. 3, pp. 199–219, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. S. C. Lin and K. M. Hsiao, “Vibration analysis of a rotating Timoshenko beam,” Journal of Sound and Vibration, vol. 240, no. 2, pp. 303–322, 2001. View at Publisher · View at Google Scholar · View at Scopus
  16. P. Marugabandhu and J. H. Griffin, “A reduced-order model for evaluating the effect of rotational speed on the natural frequencies and mode shapes of blades,” Journal of Engineering for Gas Turbines and Power, vol. 125, no. 3, pp. 772–776, 2003. View at Publisher · View at Google Scholar · View at Scopus
  17. J. R. Banerjee and H. Su, “Development of a dynamic stiffness matrix for free vibration analysis of spinning beams,” Computers and Structures, vol. 82, no. 23–26, pp. 2189–2197, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Wang and N. M. Wereley, “Free vibration analysis of rotating blades with uniform tapers,” AIAA Journal, vol. 42, no. 12, pp. 2429–2437, 2004. View at Google Scholar · View at Scopus
  19. A. A. Al-Qaisia, “Non-linear dynamics of a rotating beam clamped with an attachment angle and carrying an inertia element,” Arabian Journal for Science and Engineering, vol. 29, no. 1, pp. 81–98, 2004. View at Google Scholar · View at Scopus
  20. M. Sabuncu and K. Evran, “The dynamic stability of a rotating asymmetric cross-section Timoshenko beam subjected to lateral parametric excitation,” Finite Elements in Analysis and Design, vol. 42, no. 5, pp. 454–469, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Y. Lee and J. J. Sheu, “Free vibrations of a rotating inclined beam,” Journal of Applied Mechanics, vol. 74, no. 3, pp. 406–414, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Y. Lee and J. J. Sheu, “Free vibration of an extensible rotating inclined Timoshenko beam,” Journal of Sound and Vibration, vol. 304, no. 3–5, pp. 606–624, 2007. View at Publisher · View at Google Scholar · View at Scopus
  23. W. R. Chen, “On the vibration and stability of spinning axially loaded pre-twisted Timoshenko beams,” Finite Elements in Analysis and Design, vol. 46, no. 11, pp. 1037–1047, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. C. L. Huang, W. Y. Lin, and K. M. Hsiao, “Free vibration analysis of rotating Euler beams at high angular velocity,” Computers and Structures, vol. 88, no. 17-18, pp. 991–1001, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. B. Yardimoglu, “A novel finite element model for vibration analysis of rotating tapered Timoshenko beam of equal strength,” Finite Elements in Analysis and Design, vol. 46, no. 10, pp. 838–842, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. P. W. Likins, “Mathematical modeling of spinning elastic bodies for modal analysis,” AIAA Journal, vol. 11, no. 9, pp. 1251–1258, 1973. View at Google Scholar · View at Scopus
  27. J. C. Simo and L. Vu-Quoc, “The role of non-linear theories in transient dynamic analysis of flexible structures,” Journal of Sound and Vibration, vol. 119, no. 3, pp. 487–508, 1987. View at Google Scholar · View at Scopus
  28. K. M. Hsiao, “Corotational total Lagrangian formulation for three-dimensional beam element,” AIAA journal, vol. 30, no. 3, pp. 797–804, 1992. View at Google Scholar · View at Scopus
  29. K. M. Hsiao, R. T. Yang, and A. C. Lee, “Consistent finite element formulation for non-linear dynamic analysis of planar beam,” International Journal for Numerical Methods in Engineering, vol. 37, no. 1, pp. 75–89, 1994. View at Google Scholar · View at Scopus
  30. A. A. Shabana, H. A. Hussien, and J. L. Escalona, “Application of the absolute nodal coordinate formulation to large rotation and large deformation problems,” Journal of Mechanical Design, vol. 120, no. 2, pp. 188–195, 1998. View at Google Scholar · View at Scopus
  31. J. L. Escalona, H. A. Hussien, and A. A. Shabana, “Application of the absolute nodal co-ordinate formulation to multibody system dynamics,” Journal of Sound and Vibration, vol. 214, no. 5, pp. 833–850, 1998. View at Google Scholar · View at Scopus
  32. T. J. Chung, Continuum Mechanics, Prentice Hall, Englewood Cliffs, NJ, USA, 1988.
  33. D. J. Malvern, Introduction to the Mechanics of the Continuous Medium, Prentice Hall, Englewood Cliffs, NJ, USA, 1969.
  34. S. S. Rao, Mechanical Vibrations, Addison-Wesley, 1986.