Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2011, Article ID 340235, 14 pages
http://dx.doi.org/10.1155/2011/340235
Research Article

Vibration Attenuation in Rotating Machines Using Smart Spring Mechanism

1Laboratory of Mechanics and Structures, (LMEst) School of Mechanical Engineering, University of Uberlândia, Uberlândia, MG, Brazil
2Group of Smart Materials and Structures, (GMSINT) Mechanical Engineering Department, Engineering Faculty of Ilha Solteira, UNESP, Ilha Solteira, SP, Brazil

Received 9 July 2010; Accepted 13 October 2010

Academic Editor: Marcelo Messias

Copyright © 2011 Aldemir Ap. Cavalini et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Mahfoud, J. Der Hagopian, N. Lévecque, and V. Steffen Jr., “Experimental model to control and monitor rotating machines,” Mechanism and Machine Theory, vol. 44, no. 4, pp. 761–771, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. R. C. Simões, V. Steffen Jr., J. Der Hagopian, and J. Mahfoud, “Modal active vibration control of a rotor using piezoelectric stack actuators,” Journal of Vibration and Control, vol. 13, no. 1, pp. 45–64, 2007. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  3. D. J. Inman, Engineering Vibration, Prentice-Hall, Upper Saddle River, NJ, USA, 2001.
  4. V. Wickramasinghe, Y. Chen, and D. Zimcik, “Experimental evaluation of the smart spring impedance control approach for adaptive vibration suppression,” Journal of Intelligent Material Systems and Structures, vol. 19, no. 2, pp. 171–179, 2008. View at Publisher · View at Google Scholar
  5. Y. Skladanek, J. Der Hagopian, and J. Mahfoud, “Energy cost assessment of the active control of a rotating machine by using an electromagnetic actuator and a piezoelectric actuator,” in Proceedings of the ASME Gas Turbine Technical Congress & Exposition, vol. 6, pp. 847–854, Orlando, Fla, USA, June 2009.
  6. D. Guyomar, C. Richard, and S. Mohammadi, “Semi-passive random vibration control based on statistics,” Journal of Sound and Vibration, vol. 307, no. 3–5, pp. 818–833, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Matichard and L. Gaudiller, “Improvement of potential energetic exhange using non linear control,” in Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM '05), pp. 807–812, 2005.
  8. E. H. Maslen, P. E. Allaire, M. D. Noh, and C. K. Sortore, “Magnetic bearing design for reduced power consumption,” Journal of Tribology, vol. 118, no. 4, pp. 839–846, 1996. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Lalanne and G. Ferraris, Rotordynamics Prediction in Engineering, John Wiley & Sons, New York, NY, USA, 2nd edition, 1998.
  10. S. Daley, F. A. Johnson, J. B. Pearson, and R. Dixon, “Active vibration control for marine applications,” Control Engineering Practice, vol. 12, no. 4, pp. 465–474, 2004. View at Publisher · View at Google Scholar
  11. C. Yong, D. G. Zimcik, V. K. Wickramasinghe, and F. Nitzsche, “Development of the smart spring for active vibration control of helicopter blades,” Journal of Intelligent Material Systems and Structures, vol. 15, no. 1, pp. 37–47, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. F. Nitzsche, T. Harold, V. K. Wickramasinghe, C. Yong, and D. G. Zimcik, “Development of a maximum energy extraction control for the smart spring,” Journal of Intelligent Material Systems and Structures, vol. 16, no. 11-12, pp. 1057–1066, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. G. N. Vanderplaats, Numerical Optimization Techniques for Engineering Design, Vanderplaats Research & Development, Inc., Colorado Springs, Colo, USA, 4th edition, 1999.