Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2011, Article ID 509724, 19 pages
http://dx.doi.org/10.1155/2011/509724
Research Article

Analytical Behavior Prediction for Skewed Thick Plates on Elastic Foundation

Department of Civil and Environmental Engineering, Yonsei University, 134 Shinchon-Dong Seodaemun-Gu, Seoul 120-749, Republic of Korea

Received 11 May 2011; Accepted 1 August 2011

Academic Editor: Paulo Batista Gonçalves

Copyright © 2011 Pang-jo Chun and Yun Mook Lim. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. P. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, Engineering Societies Monographs, McGraw-Hill, New York, NY, USA, 2nd edition, 1959.
  2. Z. Celep, “Rectangular plates resting on tensionless elastic foundation,” Journal of Engineering Mechanics, vol. 114, no. 12, pp. 2083–2092, 1988. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  3. J. B. Kennedy, “Influence of elastic support on the bending of parallelogram plates,” Applied Scientific Research, vol. 18, no. 1, pp. 68–80, 1968. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  4. S. F. Ng and B. Das, “Finite deflection of skew sandwich plates on elastic foundations by the Galerkin method,” Journal of Structural Mechanics, vol. 14, no. 3, pp. 355–377, 1986. View at Google Scholar · View at Zentralblatt MATH
  5. G. C. Chell, S. Mondal, and G. Bairagi, “Large deflection analysis of rhombic sandwich plates placed on elastic foundation,” Indian Journal of Engineering & Materials Sciences, vol. 15, no. 1, pp. 7–13, 2008. View at Google Scholar
  6. J. N. Reddy, Theory and Analysis of Elastic Plates and Shells, CRC Press, New York, NY, USA, 2007. View at Zentralblatt MATH
  7. R. D. Mindlin, “Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates,” Journal of Applied Mechanics, vol. 18, no. 1, pp. 31–38, 1951. View at Google Scholar · View at Zentralblatt MATH
  8. E. Reissner, “The effect of transverse shear deformation on the bending of elastic plates,” Journal of Applied Mechanics, vol. 12, pp. A69–A77, 1945. View at Google Scholar · View at Zentralblatt MATH
  9. H. Kobayashi and K. Sonoda, “Rectangular Mindlin plates on elastic foundations,” International Journal of Mechanical Sciences, vol. 31, no. 9, pp. 679–692, 1989. View at Publisher · View at Google Scholar
  10. K. M. Liew, J. B. Han, Z. M. Xiao, and H. Du, “Differential quadrature method for Mindlin plates on Winkler foundations,” International Journal of Mechanical Sciences, vol. 38, no. 4, pp. 405–421, 1996. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  11. F. L. Liu, “Rectangular thick plates on winkler foundation: differential quadrature element solution,” International Journal of Solids and Structures, vol. 37, no. 12, pp. 1743–1763, 2000. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  12. ANSYS Release 11.0 Documentation, ANSYS Inc., 2007.
  13. P. Chun, Skewed bridge behaviors: experimental, analytical, and numerical analysis, Ph.D. thesis, Wayne State University, Wayne, NJ, USA, 2010. View at Zentralblatt MATH
  14. L. S. D. Morley, Skew Plates and Structures, Pergamon Press, New York, NY, USA, 1963. View at Zentralblatt MATH
  15. K. M. Liew and J. B. Han, “Bending analysis of simply supported shear deformable skew plates,” Journal of Engineering Mechanics, vol. 123, no. 3, pp. 214–221, 1997. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  16. P. J. Chun, G. Fu, and Y. M. Lim, “Analytical solutions for skewed thick plates subjected to transverse loading,” Structural Engineering and Mechanics, vol. 38, no. 5, pp. 549–571, 2011. View at Google Scholar · View at Zentralblatt MATH