Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2012, Article ID 263429, 8 pages
http://dx.doi.org/10.1155/2012/263429
Research Article

Modeling of Thermel Transport for GMAW

Mechanical Engineering, Government College of Engineering & Textile Technology Berhampore, West Bengal 742101, India

Received 26 December 2011; Revised 25 March 2012; Accepted 5 April 2012

Academic Editor: Sergio Preidikman

Copyright © 2012 Aniruddha Ghosh. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. W. Eagar and N. S. Tsai, “Temperature fields produced by traveling distributed heat sources,” Welding Journal, vol. 62, no. 12, pp. 346–355, 1983. View at Google Scholar · View at Scopus
  2. N. T. Nguyen, A. Ohta, K. Matsuoka, N. Suzuki, and Y. Maeda, “Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources,” Welding Research, vol. 78, no. 8, pp. 265-S–274-S, 1999. View at Google Scholar · View at Scopus
  3. V. D. Fachinotti and A. Cardona, “Semi-analytical solution of the thermal field induced by a moving double-ellipsoidal welding heat source in a semi-infinite body,” Mecánica Computacional, vol. 27, pp. 1519–1530, 2009. View at Google Scholar
  4. N. T. Nguyen, Y.-W. Mai, S. Simpson, and A. Ohta, “Analytical approximate solution for double ellipsoidal heat source in finite thick plate,” Welding Journal, vol. 83, no. 3, pp. 82S–93S, 2004. View at Google Scholar · View at Scopus
  5. P. N. Sabapathy, M. A. Wahab, and M. J. Painter, “Prediction of burn-through during in-service welding of gas pipelines,” International Journal of Pressure Vessels and Piping, vol. 77, no. 11, pp. 669–677, 2000. View at Publisher · View at Google Scholar · View at Scopus
  6. P. N. Sabapathy, M. A. Wahaba, and M. J. Painter, “Numerical models of in-service welding of gas pipelines,” Journal of Materials Processing Technology, vol. 118, no. 1–3, pp. 14–21, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Klobčar, J. Tušek, and B. Taljat, “Finite element modeling of GTA weld surfacing applied to hot-work tooling,” Computational Materials Science, vol. 31, no. 3-4, pp. 368–378, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Ghosh and S. Chattopadhyaya, “Prediction of transient temperature distribution, HAZ width and microstructural analysis of submerged arc-welded structural steel plates,” Defect and Diffusion Forum, vol. 316-317, pp. 135–152, 2011. View at Publisher · View at Google Scholar · View at Scopus