Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2012, Article ID 761978, 15 pages
http://dx.doi.org/10.1155/2012/761978
Research Article

Quasiparticle Swarm Optimization for Cross-Section Linear Profile Error Evaluation of Variation Elliptical Piston Skirt

Automation Department, Nanjing Institute of Technology, Nanjing 211167, China

Received 28 August 2011; Revised 23 October 2011; Accepted 14 November 2011

Academic Editor: Andrzej Swierniak

Copyright © 2012 Xiulan Wen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. M. Meng, Y. Y. Zhang, Y. Z. Hu, and H. Wang, “Thermo-elasto-hydrodynamic lubrication analysis of piston skirt considering oil film inertia effect,” Tribology International, vol. 40, no. 7, pp. 1089–1099, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Y. Huang, N. X. Wang, and Q. Yang, “The evaluation of piston skirt contour error,” Acta Northwest Agriculture University, vol. 21, no. 3, pp. 41–46, 1993 (Chinese). View at Google Scholar
  3. R. Y. Huang and N. X. Wang, “Study on the evaluation of piston skirt cross-section contour error with moment method,” Transactions of CSICE, vol. 14, no. 1, pp. 84–91, 1996 (Chinese). View at Google Scholar
  4. H. G. Liu, D. A. Wan, X. L. Min et al., “Study on least square method about the evaluation of contour of cross section of variation elliptical piston skirt,” Journal of Tongji University, vol. 28, no. 2, pp. 231–235, 2000 (Chinese). View at Google Scholar
  5. ISO/DIS 1101-1996, Technical drawings—geometrical tolerancing, ISO, Geneva, Switzerland, 1996.
  6. S. H. Cheraghi, H. S. Lim, and S. Motavalli, “Straightness and flatness tolerance evaluation: an optimization approach,” Precision Engineering, vol. 18, no. 1, pp. 30–37, 1996. View at Publisher · View at Google Scholar · View at Scopus
  7. G. L. Samuel and M. S. Shunmugam, “Evaluation of sphericity error from coordinate measurement data using computational geometric techniques,” Computer Methods in Applied Mechanics and Engineering, vol. 190, no. 51-52, pp. 6765–6781, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Weber, S. Motavalli, B. Fallahi, and S. H. Cheraghi, “A unified approach to form error evaluation,” Precision Engineering, vol. 26, no. 3, pp. 269–278, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. X. Zhu and H. Ding, “Flatness tolerance evaluation: an approximate minimum zone solution,” CAD Computer Aided Design, vol. 34, no. 9, pp. 655–664, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. X. M. Li and Z. Y. Shi, “Evaluation of roundness error from coordinate data using curvature technique,” Measurement, vol. 43, no. 2, pp. 164–168, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Wen and A. Song, “An improved genetic algorithm for planar and spatial straightness error evaluation,” International Journal of Machine Tools and Manufacture, vol. 43, no. 11, pp. 1157–1162, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. C. H. Liu, W. Y. Jywe, and C. K. Chen, “Quality assessment on a conical taper part based on the minimum zone definition using genetic algorithms,” International Journal of Machine Tools and Manufacture, vol. 44, no. 2-3, pp. 183–190, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. X. L. Wen, J. C. Huang, D. H. Sheng, and F. L. Wang, “Conicity and cylindricity error evaluation using particle swarm optimization,” Precision Engineering, vol. 34, no. 2, pp. 338–344, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. X. L. Wen, Y. B. Zhao, F. L. Wang, and D. X. Wang, “Particle swarm optimization for the evaluation of cross-section contour error of variation elliptical piston skirt,” in Proceedings of the International Conference on Computer Application and System Modeling, pp. V131–V135, October 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Wolfgang, “Quasi-Monte Carlo sampling to improve the efficiency of Monte Carlo EM,” Computational Statistics and Data Analysis, vol. 48, no. 4, pp. 685–701, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Kennedy and R. Eberhart, “Particle swarm optimization,” in Proceedings of the IEEE International Conference on Neural Networks, pp. 1942–1948, December 1995. View at Scopus
  17. R. Eberhart, Y. Shi, and J. Kennedy, Swarm Intelligence, Morgan Kaufmann, San Mateo, Calif, USA, 2001.
  18. Y. del Valle, G. K. Venayagamoorthy, S. Mohagheghi, J. C. Hernandez, and R. G. Harley, “Particle swarm optimization: basic concepts, variants and applications in power systems,” IEEE Transactions on Evolutionary Computation, vol. 12, no. 2, pp. 171–195, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Richards and D. Ventura, “Choosing a starting configuration for particle swarm optimization,” in Proceedings of the IEEE International Joint Conference on Neural Networks, pp. 2309–2312, July 2004. View at Scopus
  20. E. F. Campana, G. Fasano, and A. Pinto, “Dynamic system analysis and initial particles position in particle swarm optimization,” in Proceedings of the IEEE Swarm Intelligence Symposium, pp. 202–209, May 2006.
  21. G. Lei, “Adaptive random search in quasi-Monte Carlo methods for global optimization,” Computers & Mathematics with Applications, vol. 43, no. 6-7, pp. 747–754, 2002. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  22. H. Maaranen, K. Miettinen, and M. M. Mäkelä, “Quasi-random initial population for genetic algorithms,” Computers & Mathematics with Applications, vol. 47, no. 12, pp. 1885–1895, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  23. R. C. Eberhart and Y. Shi, “Comparing inertia weights and constriction factors in particle swarm optimization,” in Proceedings of the Congress on Evolutionary Computation, pp. 84–88, July 2000. View at Scopus
  24. J. J. Liang, A. K. Qin, P. N. Suganthan, and S. Baskar, “Comprehensive learning particle swarm optimizer for global optimization of multimodal functions,” IEEE Transactions on Evolutionary Computation, vol. 10, no. 3, pp. 281–295, 2006. View at Publisher · View at Google Scholar · View at Scopus