Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2012, Article ID 762371, 24 pages
http://dx.doi.org/10.1155/2012/762371
Research Article

A Parameterization Technique for the Continuation Power Flow Developed from the Analysis of Power Flow Curves

Electrical Engineering Department, São Paulo State University (UNESP), 15385-000 Ilha Solteira, SP, Brazil

Received 24 March 2012; Accepted 3 May 2012

Academic Editor: Cristian Toma

Copyright © 2012 Elisabete de Mello Magalhães et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. D. Chiang, H. Li, H. Yoshida, Y. Fukuyama, and Y. Nakanishi, “The generation of ZIP–V curves for tracing power system steady state stationary behavior due to load and generation variations,” in Proceedings of the IEEE IEEE Power Engineering Society Summer Meeting (PES '99), pp. 647–651, Edmonton, Alberta, Canada, July 1999.
  2. Reactive Power Reserve Work Group, “Voltage stability criteria, undervoltage load shedding strategy, and reactive power reserve monitoring methodology,” Final Report, p. 154, May 1999.
  3. P. W. Sauer and M. A. Pai, “Power system steady-state stability and the load-flow Jacobian,” IEEE Transactions on Power Systems, vol. 5, no. 4, pp. 1374–1383, 1990. View at Publisher · View at Google Scholar · View at Scopus
  4. C. A. Cañizares, “Conditions for saddle-node bifurcations in AC/DC power systems,” International Journal of Electrical Power and Energy Systems, vol. 17, no. 1, pp. 61–68, 1995. View at Google Scholar · View at Scopus
  5. C. A. Canizares, F. L. Alvarado, C. L. DeMarco, I. Dobson, and W. F. Long, “Point of collapse methods applied to AC/DC power systems,” IEEE Transactions on Power Systems, vol. 7, no. 2, pp. 673–683, 1992. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Iba, H. Suzuki, M. Egawa, and T. Watanabe, “Calculation of critical loading condition with nose curve using homotopy continuation method,” IEEE Transactions on Power Systems, vol. 6, no. 2, pp. 584–593, 1991. View at Publisher · View at Google Scholar · View at Scopus
  7. V. Ajjarapu and C. Christy, “The continuation power flow: a tool for steady state voltage stability analysis,” IEEE Transactions on Power Systems, vol. 7, no. 1, pp. 416–423, 1992. View at Publisher · View at Google Scholar · View at Scopus
  8. H. D. Chiang, A. J. Flueck, K. S. Shah, and N. Balu, “CPFLOW: a practical tool for tracing power system steady-state stationary behavior due to load and generation variations,” IEEE Transactions on Power Systems, vol. 10, no. 2, pp. 623–634, 1995. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Seydel, From Equilibrium to Chaos: Practical Bifurcation and Stability Analysis, vol. 5, Springer, New York, NY, USA, 2nd edition, 1994. View at Zentralblatt MATH
  10. D. A. Alves, L. C. P. da Silva, C. A. Castro, and V. F. da Costa, “Continuation load flow method parameterized by power losses,” in Proceedings of the IEEE Power Engineering Society Winter Meeting (PES '00), pp. 1123–1128, Singapore, January, 2000.
  11. A. J. Flueck and J. R. Dondeti, “A new continuation power flow tool for investigating the nonlinear effects of transmission branch parameter variations,” IEEE Transactions on Power Systems, vol. 15, no. 1, pp. 223–227, 2000. View at Google Scholar · View at Scopus
  12. D. A. Alves, L. C. P. Da Silva, C. A. Castro, and V. F. Da Costa, “Study of alternative schemes for the parameterization step of the continuation power flow method based on physical parameters-Part-I: ,athematical modeling,” Electric Power Components and Systems, vol. 31, no. 12, pp. 1151–1166, 2003. View at Google Scholar · View at Scopus
  13. E. Garbelini, D. A. Alves, A. B. Neto, E. Righeto, L. C. P. da Silva, and C. A. Castro, “An efficient geometric parameterization technique for the continuation power flow,” Electric Power Systems Research, vol. 77, no. 1, pp. 71–82, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. S. H. Li and H. D. Chiang, “Nonlinear predictors and hybrid corrector for fast continuation power flow,” IET Generation, Transmission and Distribution, vol. 2, no. 3, pp. 341–354, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. T. Van Cutsem and C. Vournas, Voltage Stability of Electric Power Systems, Power Electronics and Power Systems International Series in Engineering and Computer Science, Springer, 2007.
  16. D. Khaniya, Development of Three Phase Continuation Power Flow for Voltage Stability Analysis of Distribution System, Electrical and Computer Engineering, Mississippi State University, 2008.
  17. M. Crow, Computational Methods for Electric Power Systems, CRC Press, 2009.
  18. A. Chakrabarti, An Introduction to Reactive Power Control and Voltage Stability in Power Transmission Systems, PHI Learning, 2010.
  19. V. Ajjarapu, Computational Techniques for Voltage Stability Assessment and Control, Power Electronics and Power Systems Series, Springer, 2010.
  20. A. N. Bonini and D. A. Alves, “An efficient geometric parameterization technique for the continuation power flow through the tangent predictor,” Tendências em Matemática Aplicada e Computacional, vol. 9, no. 2, pp. 185–194, 2008. View at Google Scholar
  21. J. Zhao and B. Zhang, “Reasons and countermeasures for computation failures of continuation power flow,” in Proceedings of the IEEE Power Engineering Society General Meeting (PES '06), June 2006. View at Scopus
  22. R. Baldick, Applied Optimization: Formulation and Algorithms for Engineering Systems, Cambridge University, Cambridge, UK, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH
  23. Y. Mansour, “Suggested techniques for voltage stability analysis,” IEEE Power Engineering Subcommittee Report 93TH0620-5- PWR, 1993. View at Google Scholar
  24. L. Powell, Power System Load Flow Analysis, McGraw-Hill, 2005.
  25. J. S. Chai and A. Bose, “Bottlenecks in parallel algorithms for power system stability analysis,” IEEE Transactions on Power Systems, vol. 8, no. 1, pp. 9–15, 1993. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Jovanovic, “Semi-Newton load flow algorithms in transient security simulations,” IEEE Transactions on Power Systems, vol. 15, no. 2, pp. 694–699, 2000. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Semlyen and F. De León, “Quasi-Newton power flow using partial Jacobian updates,” IEEE Transactions on Power Systems, vol. 16, no. 3, pp. 332–339, 2001. View at Publisher · View at Google Scholar · View at Scopus