Optimization of Microextrusion Preforming Using Taguchi Method

Table 5

Dimensions of the deformed micropin.

	Position	Measurement (mm)			Mean ± SD (mm)	Standard dimension (mm)
	a	1.133	1.149	1.145	1.142±0.0068	1.14±0.01
	b	1.121	1.133	1.124	1.126±0.0051
	c	0.880	0.879	0.882	0.880±0.0013	0.88±0.01
	d	0.877	0.870	0.876	0.874±0.0031