Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2013, Article ID 404327, 9 pages
http://dx.doi.org/10.1155/2013/404327
Research Article

Simulation of Multiphase Flow of the Oil-Water Separation in a Rotating Packed Bed for Oil Purification

College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China

Received 12 December 2012; Accepted 22 January 2013

Academic Editor: Xiaosheng Qin

Copyright © 2013 Xiaojun Zhang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. X. Xia, Contamination Control of Hydraulic System, China Machine Press, Beijing, 1992.
  2. C. Ramshaw, “‘HiGee’ distillation-An example of process intensification,” Chemical Engineering Science, vol. 389, pp. 13–14, 1983. View at Google Scholar
  3. M. Keyvani and N. C. Gardner, “Operating characteristics of rotating beds,” Chemical Engineering Progress, vol. 85, no. 9, pp. 48–52, 1989. View at Google Scholar
  4. H. S. Liu, C. C. Lin, S. C. Wu, and H. W. Hsu, “Characteristics of a rotating packed bed,” Industrial and Engineering Chemistry Research, vol. 35, no. 10, pp. 3590–3596, 1996. View at Publisher · View at Google Scholar
  5. D. P. Rao, A. Bhowal, and P. S. Goswami, “Process intensification in rotating packed beds (HIGee): an Appraisal,” Industrial and Engineering Chemistry Research, vol. 43, no. 4, pp. 1150–1162, 2004. View at Publisher · View at Google Scholar
  6. X. Li, Y. Liu, Z. Li, and X. Wang, “Continues distillation experiment with rotating packed bed,” Chinese Journal of Chemical Engineering, vol. 16, no. 4, pp. 656–662, 2008. View at Publisher · View at Google Scholar
  7. H. Ji, S. L. Nie, H. M. Sun, and X. H. Tang, “Research on on-line purification of hydraulic oil based on high gravity technology,” Chinese Hydraulics & Pneumatics, no. 11, pp. 1–6, 2011. View at Google Scholar
  8. C. Zheng, K. Guo, Y. Feng, C. Yang, and N. C. Gardner, “Pressure drop of centripetal gas flow through rotating beds,” Industrial and Engineering Chemistry Research, vol. 39, no. 3, pp. 829–834, 2000. View at Publisher · View at Google Scholar
  9. A. Basic and M. P. Dudukovic, “Liquid holdup in rotating packed beds: examination of the film flow assumption,” AIChE Journal, vol. 41, no. 2, pp. 301–316, 1995. View at Publisher · View at Google Scholar
  10. M. J. Lockett, “Flooding of rotating structured packing and its application to conventional packed columns,” Trans IChemE, vol. 73, pp. 379–384, 1995. View at Google Scholar
  11. K. Guo, F. Guo, Y. Feng, J. Chen, C. Zheng, and N. C. Gardner, “Synchronous visual and RTD study on liquid flow in rotating packed-bed contractor,” Chemical Engineering Science, vol. 55, no. 9, pp. 1699–1706, 2000. View at Publisher · View at Google Scholar
  12. C. Ramshaw and R. H. Mallinson, “Mass transfer process,” U.S. Patent 4, vol. 283, no. 255, 1981.
  13. H. H. Tung and R. S. H. Mah, “Modeling liquid mass tranfer in HIGee separtion process,” Chemical Engineering Communications, vol. 39, no. 1–6, pp. 147–153, 1985. View at Publisher · View at Google Scholar
  14. S. Munjal, M. P. Dudukovć, and P. Ramachandran, “Mass-transfer in rotating packed beds-I. Development of gas-liquid and liquid-solid mass-transfer correlations,” Chemical Engineering Science, vol. 44, no. 10, pp. 2245–2256, 1989. View at Publisher · View at Google Scholar
  15. S. Munjal, M. P. Duduković, and P. Ramachandran, “Mass-transfer in rotating packed beds-II. Experimental results and comparison with theory and gravity flow,” Chemical Engineering Science, vol. 44, no. 10, pp. 2257–2268, 1989. View at Publisher · View at Google Scholar
  16. M. Kumar and N. C. Gardner, “Operating characteristics of rotating beds,” Chemical Engineering Science, vol. 85, no. 9, pp. 48–52, 1989. View at Google Scholar
  17. M. P. Kumar and D. P. Rao, “Studies on a high-gravity gas-liquid contactor,” Industrial Engineering Chemistry Research, vol. 29, no. 5, pp. 917–920, 1990. View at Publisher · View at Google Scholar
  18. S. P. Singh, J. H. Wilson, R. M. Counce et al., “Removal of volatile organic compounds from groundwater using a rotary air stripper,” Industrial and Engineering Chemistry Research, vol. 31, no. 2, pp. 574–580, 1992. View at Publisher · View at Google Scholar
  19. Y. H. Chen, C. Y. Chang, W. L. Su et al., “Modeling ozone contacting process in a rotating packed bed,” Industrial and Engineering Chemistry Research, vol. 43, no. 1, pp. 228–236, 2004. View at Publisher · View at Google Scholar
  20. Y. S. Chen, C. C. Lin, and H. S. Liu, “Mass tranfer in a rotationg packed bed with viscous newtonian and non-newtonian fluids,” Industrial Engineering Chemistry Research, vol. 44, no. 4, pp. 1043–1051, 2005. View at Publisher · View at Google Scholar
  21. Y. S. Chen, C. C. Lin, and H. S. Liu, “Mass tranfer in a rotationg packed bed with viscous radii of the bed,” Industrial Engineering Chemistry Research, vol. 44, no. 20, pp. 7868–7875, 2005. View at Publisher · View at Google Scholar
  22. J. R. Burns and C. Ramshaw, “Process intensification: visual study of liquid maldistribution in rotating packed beds,” Chemical Engineering Science, vol. 51, no. 8, pp. 1347–1352, 1996. View at Publisher · View at Google Scholar
  23. L. J. Guo, Two-Phase and multiPhase Hydrodynamics, Xi'an Jiaotong University Press, Xi'an, China, 2002.
  24. X. Y. Kong, Advanced Mechanics of Fluid Flow in Porous Media, Chinese Science and Technology University Press, Hefei, China, 2010.
  25. L. S. Cheng, Advanced Mechanics of Fluid Flow in Porous Media, Petroleum Industry Press, Beijng, China, 2010.
  26. L. Fan, R.T. Hai, W. X. Wang, Z. Lu, and Z. M. Yang, “Application of computational fluid dynamic to model the hydraulic performance of subsurface flow wetlands,” Journal of Environmental Sciences, vol. 20, no. 12, pp. 1415–1422, 2008. View at Publisher · View at Google Scholar
  27. Z. Wen, L. C. Shi, and Y. R. Ren, The Flent Computational Dynamics Application Guide, Tsinghua University Press, Beijing, China, 2009.
  28. J. C. Sheng, Hydraulic Fluid Mechanics, Mechanical Industry Press, Beijing, China, 1980.
  29. Y. Yu, J. M. Zhang, and L. T. Jiang, Fluent Introductory and Advanced Course, Beijing Institute of Technology Press, Beijing, China, 2011.