Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2013, Article ID 635809, 17 pages
http://dx.doi.org/10.1155/2013/635809
Research Article

Dynamic Characteristics Study with Multidegree-of-Freedom Coupling in TBM Cutterhead System Based on Complex Factors

1School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China
2Northern Heavy Industry Group Ltd., Shenyang 110141, China

Received 8 October 2013; Revised 18 November 2013; Accepted 18 November 2013

Academic Editor: Rongni Yang

Copyright © 2013 Wei Sun et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Promotion Center for Science & Technology Achievements of Ministry of Water Resources, Full Face Rock Tunnel Boring Machine (TBM), Petroleum Industry Press, Beijing, China, 2005 (Chinese).
  2. H. L. Li, “Troubleshooting for cutter disk cracking of model TB880 rock tunneler,” Construction Machinery and Equipment, vol. 41, no. 3, pp. 62–67, 2010 (Chinese). View at Google Scholar
  3. Y. J. Wang, “Analysis of the causes of failures and maintenance techniques for the main bearing of the TBM,” Traffic Engineering and Technology for National Defence, no. 2, pp. 46–49, 2011 (Chinese). View at Google Scholar
  4. M. X. Qi, Y. J. Wang, and H. L. Li, “Research and application of overall refit of open type TBM,” Modern Tunnelling TechNology, vol. 46, no. 4, pp. 64–70, 2009 (Chinese). View at Google Scholar
  5. A. E. Samuel and L. P. Seow, “Disc force measurements on a full-face tunnelling machine,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 21, no. 2, pp. 83–96, 1984. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. X. Zhang, S. Q. Kou, and P.-A. Lindqvist, “In-situ measurements of cutter forces on boring machine at Äspö Hard Rock Laboratory,” Rock Mechanics and Rock Engineering, vol. 36, no. 1, pp. 63–83, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Rostami, “Hard rock TBM cutterhead modeling for design and performance prediction,” Geomechanik Und Tunnelbau, vol. 1, pp. 18–28, 2008. View at Google Scholar
  8. L. H. Wang, Y. L. Kang, Z. X. Cai et al., “The energy method to predict disc cutter wear extent for hard rock TBMs,” Tunnelling and Underground Space Technology, vol. 28, no. 1, pp. 183–191, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. Q. Zhang, C. Qu, Y. Kang et al., “Identification and optimization of energy consumption by shield tunnel machines using a combined mechanical and regression analysis,” Tunnelling and Underground Space Technology, vol. 28, no. 1, pp. 350–354, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. M. Xia, T. Ooyang, X. M. Zhang et al., “Mechanical model of breaking rock and force characteristic of disc cutter,” Journal of Central South University, vol. 19, pp. 1846–1852, 2012. View at Publisher · View at Google Scholar
  11. Q. Tang, M. J. Xu, Y. M. Xia et al., “Numerical study on mode of breaking rock by TBM cutter in two cutting orders,” Journal of Central South University, vol. 43, no. 3, pp. 940–946, 2012 (Chinese). View at Google Scholar
  12. J. Huo, W. Sun, L. Guo, Z. Li, and X. Zhang, “Numerical simulation of the rock fracture process induced by multi-disc-cutters and cutter spacing design,” Journal of Harbin Engineering University, vol. 33, no. 1, pp. 96–99, 2012 (Chinese). View at Publisher · View at Google Scholar · View at Scopus
  13. J. Z. Huo, W. Sun, J. Chen, and X. Zhang, “Disc cutters plane layout design of the full-face rock tunnel boring machine (TBM) based on different layout patterns,” Computers & Industrial Engineering, vol. 61, no. 4, pp. 1209–1225, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. W. Sun, J. Huo, J. Chen et al., “Disc cutters' layout design of the full-face rock tunnel boring machine (TBM) using a cooperative coevolutionary algorithm,” Journal of Mechanical Science and Technology, vol. 25, no. 2, pp. 415–427, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. Li, J. Z. Huo, W. Sun et al., “Cutterhead structure optimal design of the full-face rock tunnel boring machine,” Machine Design & Research, vol. 27, no. 1, article 90, pp. 83–86, 2011 (Chinese). View at Google Scholar
  16. K. Z. Zhang, Study on dynamic characteristics of redundantly driven revolving system of shield TBM [Ph.D. thesis], Shanghai Jiao Tong University, Shanghai, China, 2011 (Chinese).
  17. T. Sakanushi, J. Hu, K. Yamada et al., “The parameterization of all stabilizing two-degrees-of-freedom simple repetitive controllers and its application,” International Journal of Innovative Computing Information and Control, vol. 9, no. 3, pp. 1271–1292, 2013. View at Google Scholar
  18. K. Yamada, N. Nakazawa, I. Murakami et al., “A design method for two-degree-of-freedom multi-period repetitive control systems,” Key Engineering Materials, vol. 459, pp. 194–210, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. S. C. Martin and L. L. Whitcomb, “Preliminary experiments in comparative experimental identification of six degree-of-freedom coupled dynamic plant models for underwater robot vehicles,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '13), pp. 2962–2969, Karlsruhe, Germany, 2013. View at Publisher · View at Google Scholar
  20. R. F. Li and J. J. Wang, Gear Transmission System Dynamics, Science Press, Beijing, China, 1997 (Chinese).
  21. J.-X. Zhou, G. Liu, and S.-J. Ma, “Vibration and noise analysis of gear transmission system,” Journal of Vibration and Shock, vol. 30, no. 6, pp. 234–238, 2011 (Chinese). View at Google Scholar · View at Scopus
  22. S. E. Deng and Q. Y. Jia, Design Principles of Rolling Bearings, Standards Press of China, Beijing, China, 2008 (Chinese).
  23. J. W. Luo and T. Y. Luo, The Calculation and Application of Rolling Bearings, Machinery Industry Press, Beijing, 2009 (Chinese).
  24. Mechanical Design Handbook Editorial Board, Mechanical Design Handbook Offprint Mechanical Vibration and Noise, Machinery Industry Press, Beijing, China, 2007 (Chinese).
  25. H. X. Zhang and N. C. Zhang, “Brief discussion on cutter head vibration of type 803E TBM,” Tunnel Construction, vol. 27, no. 6, article 111, pp. 76–78, 2007 (Chinese). View at Google Scholar