TY - JOUR A2 - Cao, SunQun AU - Niu, Xiaofeng AU - Wang, Guanqian AU - Liang, Wei AU - Hou, Hua AU - Wang, Hongxia AU - Zhang, Jinshan PY - 2013 DA - 2013/11/24 TI - Application of Fuzzy Set Theory to Quantitative Analysis of Correctness of the Mathematical Model Based on the ADI Method during Solidification SP - 894384 VL - 2013 AB - The explicit finite difference (EFD) method is used to calculate the casting temperature field during the solidification process. Because of its limited time step, the computational efficiency of the EFD method is lower than that of the alternating direction implicit (ADI) method. A model based on the equivalent specific heat method and the ADI method that improves computational efficiency is established. The error of temperature field simulation comes from model simplification, the acceptable hypotheses and calculation errors caused by different time steps, and the different mesh numbers that are involved in the process of numerical simulation. This paper quantitatively analyzes the degree of similarity between simulated and experimental results by the hamming distance (HD). For a thick-walled position, the time step influences the simulation results of the temperature field and the number of casting meshes has little influence on the simulation results of temperature field. For a thin-walled position, the time step has minimal influence on the simulation results of the temperature field and the number of casting meshes has a larger influence on the simulation results of temperature field. SN - 1024-123X UR - https://doi.org/10.1155/2013/894384 DO - 10.1155/2013/894384 JF - Mathematical Problems in Engineering PB - Hindawi Publishing Corporation KW - ER -