Table of Contents Author Guidelines Submit a Manuscript
Retracted

This article has been retracted as it was submitted for publication without the knowledge and approval of the co-author Shuyun Jiang.

View the original article here.

References

  1. L. Wang and S. Jiang, “Performance analysis of high-speed deep/shallow recessed hybrid bearing,” Mathematical Problems in Engineering, vol. 2013, Article ID 918767, 9 pages, 2013.
Mathematical Problems in Engineering
Volume 2013 (2013), Article ID 918767, 9 pages
http://dx.doi.org/10.1155/2013/918767
Research Article

Performance Analysis of High-Speed Deep/Shallow Recessed Hybrid Bearing

School of Mechanical Engineering, Southeast University, Nanjing 211189, China

Received 10 June 2013; Accepted 5 November 2013

Academic Editor: Tirivanhu Chinyoka

Copyright © 2013 Lei Wang and Shuyun Jiang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. Abele, Y. Altintas, and C. Brecher, “Machine tool spindle units,” CIRP Annals, vol. 59, no. 2, pp. 781–802, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. W. Xiong, X. Yang, L. Lv, and J. Yuan, “Review on key technology of hydrodynamic and hydrostatic high-frequency motor spindles,” Journal of Mechanical Engineering, vol. 45, no. 9, pp. 1–18, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. W. B. Rowe, “A theoretical and experimental investigation of self compensated externally pressurized thrust bearings,” in Proceedings of the 6th Symposium on Gas Bearing, 1974.
  4. G. Hong, L. Xinmin, W. Xiaoling, and C. Shaoqi, “Performance of flat capillary compensated deep/shallow pockets hydrostatic/hydrodynamic journal-thrust floating ring bearing,” Tribology Transactions, vol. 52, no. 2, pp. 204–212, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. H. Guo, S. Lin Zhang, and S. Qi Cen, “Theoretical and experimental study on dynamic coefficients and stability for a hydrostatic/hydrodynamic conical bearing,” Journal of Tribology, vol. 131, pp. 701–708, 2009. View at Google Scholar
  6. D. Pan, Z. Yabin, and X. Hua, “The structure of new journal hybrid bearing for high-speed machine spindle and its performance,” Lubrication Engineering, vol. 34, no. 2, pp. 11–14, 2009. View at Google Scholar
  7. C.-H. Chen, Y. Kang, Y.-N. Huang, C.-H. Chu, and J.-T. Teng, “The restrictive effects of capillary compensation on the stability of the Jeffcott rotor-hybrid bearing system,” Tribology International, vol. 35, no. 12, pp. 849–855, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Chen, F. Wang, and Y. Zhang, “The flow field simulation of a novel water-lubricated hybrid bearing for high-speed spindle,” in Proceedings of the STLE/ASME International Joint Tribology Conference (IJTC '10), pp. 91–93, October 2010. View at Scopus
  9. N. Heinrichson, I. F. Santos, and A. Fuerst, “The influence of injection pockets on the performance of tilting-pad thrust bearings—part I. Theory,” Journal of Tribology, vol. 129, no. 4, pp. 895–903, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Guo, S. Lin Zhang, and S. Qi Cen, “Research on static characteristics of deep/shallow pockets hybrid bearing under laminar and turbulent mixed regimes,” in Advanced Materials Research, Materials Processing Technology, vol. 291–294, pp. 1516–1520, 2011. View at Google Scholar
  11. C.-H. Chen, Y. Kang, Y.-P. Chang, H.-H. Lee, and P.-C. Shen, “Influences of recess depth on the stability of the Jeffcott rotor supported by hybrid bearings with orifice restrictors,” Industrial Lubrication and Tribology, vol. 57, no. 1, pp. 41–51, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. C. H. Chen, Y. Kang, Y.-P. Chang, Y.-P. Wang, and H.-H. Lee, “Influence of restrictor on stability of the rigid rotor-hybrid bearing system,” Journal of Sound and Vibration, vol. 297, no. 3–5, pp. 635–648, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Helene, M. Arghir, and J. Frene, “Numerical study of the pressure pattern in a two-dimensional hybrid journal bearing recess, laminar, and turbulent flow results,” Journal of Tribology, vol. 125, no. 2, pp. 283–290, 2003. View at Publisher · View at Google Scholar · View at Scopus
  14. G. G. Hirs, “A bulk-flow theory for turbulence in lubricant films,” Journal of Lubrication Technology, vol. 95, no. 2, pp. 137–146, 1973. View at Google Scholar · View at Scopus
  15. B. J. Hamrock, S. R. Schmid, and B. O. Jacobson, Fundamentals of Fluid Film Lubrication, 2004.
  16. V. N. Constantinescu and S. Galetuse, “Pressure drop due to inertia forces in step bearings,” Journal of Lubrication Technology, vol. 98, no. 1, pp. 167–174, 1976. View at Google Scholar · View at Scopus
  17. J. Frêne, M. Arghir, and V. Constantinescu, “Combined thin-film and Navier-Stokes analysis in high Reynolds number lubrication,” Tribology International, vol. 39, no. 8, pp. 734–747, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Z. Szeri, Fluid Film Lubrication: Theory and Design, Cambridge University Press, 1998.
  19. S. M. Chun and D.-H. Ha, “Study on mixing flow effects in a high-speed journal bearing,” Tribology International, vol. 34, no. 6, pp. 397–405, 2001. View at Publisher · View at Google Scholar · View at Scopus