Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 132647, 12 pages
http://dx.doi.org/10.1155/2014/132647
Research Article

Static Eccentricity Fault Recognition in Three-Phase Line Start Permanent Magnet Synchronous Motor Using Finite Element Method

1Centre for Advanced Power and Energy Research, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2Department of Electrical and Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia

Received 15 July 2014; Revised 22 October 2014; Accepted 5 November 2014; Published 24 November 2014

Academic Editor: Yang Tang

Copyright © 2014 Mahdi Karami et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Toosi, M. R. Mehrjou, M. Karami, and M. R. Zare, “Increase performance of IPMSM by combination of maximum torque per ampere and flux-weakening methods,” ISRN Power Engineering, vol. 2013, Article ID 187686, 10 pages, 2013. View at Publisher · View at Google Scholar
  2. A. M. Knight and C. I. McClay, “The design of high-efficiency line-start motors,” IEEE Transactions on Industry Applications, vol. 36, no. 6, pp. 1555–1562, 2000. View at Publisher · View at Google Scholar · View at Scopus
  3. A. H. Isfahani and S. Vaez-Zadeh, “Line start permanent magnet synchronous motors: challenges and opportunities,” Energy, vol. 34, no. 11, pp. 1755–1763, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. G.-H. Kang, J. Hur, H. Nam, J.-P. Hong, and G.-T. Kim, “Analysis of irreversible magnet demagnetization in line-start motors based on the finite-element method,” IEEE Transactions on Magnetics, vol. 39, no. 3 I, pp. 1488–1491, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. W. H. Kim, K. C. Kim, S. J. Kim et al., “A study on the optimal rotor design of lspm considering the starting torque and efficiency,” IEEE Transactions on Magnetics, vol. 45, no. 3, pp. 1808–1811, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. W. Fei, P. C. K. Luk, J. Ma, J. X. Shen, and G. Yang, “A high-performance line-start permanent magnet synchronous motor amended from a small industrial three-phase induction motor,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4724–4727, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Faiz, B. M. Ebrahimi, B. Akin, and H. A. Toliyat, “Comprehensive eccentricity fault diagnosis in induction motors using finite element method,” IEEE Transactions on Magnetics, vol. 45, no. 3, pp. 1764–1767, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Faiz, B. M. Ebrahimi, and M. B. B. Sharifian, “Different faults and their diagnosis techniques in three-phase squirrel-cage induction motors—a review,” Electromagnetics, vol. 26, no. 7, pp. 543–569, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Yahia, A. J. M. Cardoso, A. Ghoggal, and S. E. Zouzou, “Induction motors airgap-eccentricity detection through the discrete wavelet transform of the apparent power signal under non-stationary operating conditions,” ISA Transactions, vol. 53, no. 2, pp. 603–611, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Faiz, I. Tabatabaei, and E. Sharifi-Ghazvini, “A precise electromagnetic modeling and performance analysis of a three-phase squirrel-cage induction motor under mixed eccentricity condition,” Electromagnetics, vol. 24, no. 6, pp. 471–489, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. B. M. Ebrahimi, M. Etemadrezaei, and J. Faiz, “Dynamic eccentricity fault diagnosis in round rotor synchronous motors,” Energy Conversion and Management, vol. 52, no. 5, pp. 2092–2097, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. B. L. Rajalakshmi Samaga and K. P. Vittal, “Comprehensive study of mixed eccentricity fault diagnosis in induction motors using signature analysis,” International Journal of Electrical Power and Energy Systems, vol. 35, no. 1, pp. 180–185, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Sahraoui, A. Ghoggal, S. E. Zouzou, and M. E. Benbouzid, “Dynamic eccentricity in squirrel cage induction motors—simulation and analytical study of its spectral signatures on stator currents,” Simulation Modelling Practice and Theory, vol. 16, no. 9, pp. 1503–1513, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. W. T. Thomson and A. Barbour, “On-line current monitoring and application of a finite element method to predict the level of static airgap eccentricity in three-phase induction motors,” IEEE Transactions on Energy Conversion, vol. 13, no. 4, pp. 347–354, 1998. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Faiz and S. Pakdelian, “Diagnosis of static eccentricity in switched reluctance motors based on mutually induced voltages,” IEEE Transactions on Magnetics, vol. 44, no. 8, pp. 2029–2034, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. B. M. Ebrahimi, M. Javan Roshtkhari, J. Faiz, and S. V. Khatami, “Advanced eccentricity fault recognition in permanent magnet synchronous motors using stator current signature analysis,” IEEE Transactions on Industrial Electronics, vol. 61, no. 4, pp. 2041–2052, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. M. R. Mehrjou, N. Mariun, M. Karami, N. Misron, S. Toosi, and M. R. Zare, “Evaluation of wavelet-functions for broken rotor bar detection of induction machine using coefficient-related features,” The International Journal of Applied Electronics in Physics & Robotics, vol. 1, no. 1, pp. 18–23, 2013. View at Google Scholar
  18. S. Nandi, H. A. Toliyat, and X. Li, “Condition monitoring and fault diagnosis of electrical motors—a review,” IEEE Transactions on Energy Conversion, vol. 20, no. 4, pp. 719–729, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. G. K. Singh and S. A. S. Al Kazzaz, “Induction machine drive condition monitoring and diagnostic research—a survey,” Electric Power Systems Research, vol. 64, no. 2, pp. 145–158, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. J. R. Cameron, W. T. Thomson, and A. B. Dow, “Vibration and current monitoring for detecting airgap eccentricity in large induction motors,” IEE Proceedings B: Electric Power Applications, vol. 133, no. 3, pp. 155–163, 1986. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Faiz and M. Ojaghi, “Different indexes for eccentricity faults diagnosis in three-phase squirrel-cage induction motors: a review,” Mechatronics, vol. 19, no. 1, pp. 2–13, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Nandi, S. Ahmed, and H. A. Toliyat, “Detection of rotor slot and other eccentricity related harmonics in a three phase induction motor with different rotor cages,” IEEE Transactions on Energy Conversion, vol. 16, no. 3, pp. 253–260, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. W. le Roux, R. G. Harley, and T. G. Habetler, “Detecting rotor faults in low power permanent magnet synchronous machines,” IEEE Transactions on Power Electronics, vol. 22, no. 1, pp. 322–328, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. B. M. Ebrahimi, J. Faiz, and M. J. Roshtkhari, “Static-, dynamic-, and mixed-eccentricity fault diagnoses in permanent-magnet synchronous motors,” IEEE Transactions on Industrial Electronics, vol. 56, no. 11, pp. 4727–4739, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. T.-J. Kim, S.-M. Hwang, K.-T. Kim, W.-B. Jung, and C.-U. Kim, “Comparison of dynamic responses for IPM and SPM motors by considering mechanical and magnetic coupling,” IEEE Transactions on Magnetics, vol. 37, no. 4, pp. 2818–2820, 2001. View at Publisher · View at Google Scholar · View at Scopus
  26. B. M. Ebrahimi, J. Faiz, and B. N. Araabi, “Pattern identification for eccentricity fault diagnosis in permanent magnet synchronous motors using stator current monitoring,” IET Electric Power Applications, vol. 4, no. 6, pp. 418–430, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. A. H. Bonnett and G. C. Soukup, “Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors,” IEEE Transactions on Industry Applications, vol. 28, no. 4, pp. 921–937, 1992. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Akar, “Detection of a static eccentricity fault in a closed loop driven induction motor by using the angular domain order tracking analysis method,” Mechanical Systems and Signal Processing, vol. 34, no. 1-2, pp. 173–182, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Seera, C. P. Lim, S. Nahavandi, and C. K. Loo, “Condition monitoring of induction motors: a review and an application of an ensemble of hybrid intelligent models,” Expert Systems with Applications, vol. 41, no. 10, pp. 4891–4903, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. H. Torkaman and E. Afjei, “Sensorless method for eccentricity fault monitoring and diagnosis in switched reluctance machines based on stator voltage signature,” IEEE Transactions on Magnetics, vol. 49, no. 2, pp. 912–920, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. J. Hong, S. Park, D. Hyun et al., “Detection and classification of rotor demagnetization and eccentricity faults for PM synchronous motors,” IEEE Transactions on Industry Applications, vol. 48, no. 3, pp. 923–932, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. D. Hyun, J. Hong, S. B. Lee et al., “Automated monitoring of airgap eccentricity for inverter-fed induction motors under standstill conditions,” IEEE Transactions on Industry Applications, vol. 47, no. 3, pp. 1257–1266, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. D. G. Dorrell and C. Cossar, “A vibration-based condition monitoring system for switched reluctance machine rotor eccentricity detection,” IEEE Transactions on Magnetics, vol. 44, no. 9, pp. 2204–2214, 2008. View at Publisher · View at Google Scholar · View at Scopus
  34. S. Nandi, T. C. Ilamparithi, S. B. Lee, and D. Hyun, “Detection of eccentricity faults in induction machines based on nameplate parameters,” IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1673–1683, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. H. Guldemir, “Detection of airgap eccentricity using line current spectrum of induction motors,” Electric Power Systems Research, vol. 64, no. 2, pp. 109–117, 2003. View at Publisher · View at Google Scholar · View at Scopus
  36. M. M. Liwschitz, “Field harmonics in induction motors,” Transactions of the American Institute of Electrical Engineers, vol. 61, no. 11, pp. 797–803, 1942. View at Publisher · View at Google Scholar
  37. R. Sharifi and M. Ebrahimi, “Detection of stator winding faults in induction motors using three-phase current monitoring,” ISA Transactions, vol. 50, no. 1, pp. 14–20, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. W. T. Thomson, D. Rankin, and D. G. Dorrell, “On-line current monitoring to diagnose airgap eccentricity in large three-phase induction motors-industrial case histories verify the predictions,” IEEE Transactions on Energy Conversion, vol. 14, no. 4, pp. 1372–1378, 1999. View at Publisher · View at Google Scholar · View at Scopus
  39. S. A. Taher and M. Malekpour, “A novel technique for rotor bar failure detection in single-cage induction motor using FEM and MATLAB/SIMULINK,” Mathematical Problems in Engineering, vol. 2011, Article ID 620689, 14 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. D. Casadei, F. Filippetti, C. Rossi, and A. Stefani, “Magnets faults characterization for permanent magnet synchronous motors,” in Proceedings of the IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED '09), pp. 1–6, IEEE, Cargèse, France, September 2009. View at Publisher · View at Google Scholar · View at Scopus