Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014 (2014), Article ID 196729, 8 pages
http://dx.doi.org/10.1155/2014/196729
Research Article

The Pressure Drop Model of Liquid Flow with Wall Mass Transfer in Horizontal Wellbore with Perforated Completion

The State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation Engineering, Southwest Petroleum University, Chengdu, Sichuan 610500, China

Received 16 December 2013; Revised 27 March 2014; Accepted 3 April 2014; Published 16 April 2014

Academic Editor: Marcelo M. Cavalcanti

Copyright © 2014 Ping Yue et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. J. Dikken, “Pressure drop in horizontal wells and its effect on their production performance,” in Proceedings of the 64th Annual Technical Conference and Exhibition, Paper SPE 19824, pp. 574–19824, San Antonio, Tex, USA, October 1989. View at Scopus
  2. G. T. Jackson, M. T. Balhoff, C. Huh, and M. Delshad, “CFD-based representation of non-Newtonian polymer injectivity for a horizontal well with coupled formation-wellbore hydraulics,” Journal of Petroleum Science and Engineering, vol. 78, no. 1, pp. 86–95, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. D. Y. Ding, “Coupled simulation of near-wellbore and reservoir models,” Journal of Petroleum Science and Engineering, vol. 76, no. 1-2, pp. 21–36, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. R. M. S. M. Schulkes and O. H. Utvik, “Pressure drop in a perforated pipe with radial inflow: single-phase flow,” SPE Journal, vol. 3, no. 1, pp. 77–85, 1998. View at Google Scholar
  5. H. Yuan, C. Sarica, and J. P. Brill, “Effect of perforation density on single phase liquid flow behavior in horizontal wells,” in Proceedings of the 2nd SPE International Conference on Horizontrd Well Technology, SPE 37109, pp. 603–612, Alberta, Canada, November 1996. View at Scopus
  6. Z.-M. Wang, J.-N. Xiao, X.-Q. Wang, and J.-G. Wei, “Experimental study for pressure drop of variable mass flow in horizontal well,” Journal of Experiments in Fluid Mechanics, vol. 25, no. 5, pp. 26–29, 2011 (Chinese). View at Google Scholar · View at Scopus
  7. H. Asheim, J. Kolnes, and P. A. Oudeman, “A flow resistance correlation for completed wellbore,” Journal of Petroleum Science and Engineering, vol. 8, no. 2, pp. 97–104, 1992. View at Publisher · View at Google Scholar · View at Scopus
  8. R. A. Novy, “Pressure drops in horizontal wells: when can they be ignored?” SPE Reservoir Engineering, vol. 10, no. 1, pp. 29–35, 1995. View at Google Scholar · View at Scopus
  9. E. Ozkan, C. Sarica, M. Haciislamoglu, and R. Raghavan, “The influence of pressure drop along the wellbore on horizontal well productivity,” in Proceedings of the SPE Production Operations Symposium, Paper SPE 25502, Stillwater, Okla, USA, March 1993.
  10. E. Ozkan, C. Sarica, M. Haciislamoglu, and R. Raghavan, “Effect of conductivity on horizontal well pressure behavior,” Paper SPE 30230 as supplement to paper 24683, 1995.
  11. B. Guo, “Corrections to horizontal drain hole productivity equations for wellbore friction effect,” Journal of Petroleum Science and Engineering, vol. 70, no. 3-4, pp. 344–349, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. J.-H. Zhang, C.-Q. Yan, and P.-Z. Gao, “Characteristics of pressure drop and correlation of friction factors for single-phase flow in rolling horizontal pipe,” Journal of Hydrodynamics B, vol. 21, no. 5, pp. 614–621, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Su and J. S. Gudmundsson, “Pressure drop in perforated pipes: experiments and analysis,” in Proceedings of the Asia Pacific Oil & Gas Conference, Paper SPE 28800, pp. 563–574, Melbourne, Australia, November 1994. View at Scopus
  14. L.-B. Ouyang, S. Arbabi, and K. Aziz, “General wellbore flow model for horizontal, vertical and slanted well completions,” SPE Journal, vol. 3, no. 2, pp. 124–132, 1998. View at Google Scholar · View at Scopus
  15. H. Yuan, C. Sarica, S. Miska, and J. P. Brill, “An experimental and analytical study of single-phase liquid flow in a horizontal well,” Journal of Energy Resources Technology, vol. 119, no. 20, pp. 20–25, 1997. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Yuan, C. Sanica, and J. P. Brill, “Effect of completion geometry and phasing on single-phase liquid flow behavior in horizontal wells,” in Proceedings of the SPE Technical Conference and Exhibition, Paper SPE 48937, pp. 93–104, New Orleans, Louisiana, September 1998. View at Scopus
  17. W. Jiang, C. Sarica, E. Ozkan, and M. Kelkar, “Investigation of the effects of completion geometry on single-phase liquid flow behavior in horizontal wells,” Journal of Energy Resources Technology, vol. 123, no. 2, pp. 119–126, 2001. View at Publisher · View at Google Scholar · View at Scopus
  18. W. Jiang, Investigation of the effects of completion geometries upon single phase liquid flow behavior in horizontal wells [M.S. thesis], The University of Tulsa, Tulsa, Okla, USA, 1999.