Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014 (2014), Article ID 238515, 12 pages
http://dx.doi.org/10.1155/2014/238515
Research Article

Methods for Prediction of Steel Temperature Curve in the Whole Process of a Localized Fire in Large Spaces

1School of Safety Engineering, China University of Mining and Technology, Xuzhou 221116, China
2Jiangsu Key Laboratory for Environmental Impact and Structural Safety in Civil Engineering, Xuzhou 221116, China
3Institute of Industry Technology, Guangzhou and Chinese Academy of Sciences, Guangzhou 510000, China

Received 4 October 2013; Revised 2 December 2013; Accepted 10 December 2013; Published 5 January 2014

Academic Editor: Oluwole Daniel Makinde

Copyright © 2014 Zhang Guowei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. O. Pettersson, S. E. Magnusson, and J. Thor, Fire Engineering Design of Steel Structures, Lund Institute of Technology, Lund, Sweden, 1976.
  2. D. J. Latham, B. R. Kirby, and G. Thomson, “The temperatures attained by unprotected structural steelwork in experimental natural fires,” Fire Safety Journal, vol. 12, no. 2, pp. 139–152, 1987. View at Google Scholar · View at Scopus
  3. J. I. Ghojel and M. B. Wong, “Heat transfer model for unprotected steel members in a standard compartment fire with participating medium,” Journal of Constructional Steel Research, vol. 61, no. 6, pp. 825–833, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. F. Wald, M. Chladná, D. Moore, A. Santiago, and T. Lennon, “Temperature distribution in a full-scale steel framed building subject to a natural fire,” Steel and Composite Structures, vol. 6, no. 2, pp. 159–182, 2006. View at Google Scholar · View at Scopus
  5. T. R. Kay, B. R. Kirby, and R. R. Preston, “Calculation of the heating rate of an unprotected steel member in a standard fire resistance test,” Fire Safety Journal, vol. 26, no. 4, pp. 327–350, 1996. View at Publisher · View at Google Scholar · View at Scopus
  6. L. Gardner and K. T. Ng, “Temperature development in structural stainless steel sections exposed to fire,” Fire Safety Journal, vol. 41, no. 3, pp. 185–203, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. T. Z. Harmathy and M. A. Sultan, “Correlation between the severities of the ASTM E119 and ISO 834 fire exposures,” Fire Safety Journal, vol. 13, no. 2-3, pp. 163–168, 1988. View at Google Scholar · View at Scopus
  8. ASTM, Standard Methods of Fire Tests of Building Construction and Materials (ASTM Standard E119-05), American Society for Testing and Materials, West Conshohocken, Pa, USA, 2005.
  9. I. F. R. Tests, Elements of Building Construction, ISO-834, International Organization for Standardization, Geneva, Switzerland, 1975.
  10. C. R. Barnett, “Replacing international temperature-time curves with BFD curve,” Fire Safety Journal, vol. 42, no. 4, pp. 321–327, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. A. H. Buchanan, Structural Design for Fire Safety, vol. 273, Wiley, New York, NY, USA, 2001.
  12. C. Gutiérrez-Montes, E. Sanmiguel-Rojas, A. Viedma, and G. Rein, “Experimental data and numerical modelling of 1.3 and 2.3 MW fires in a 20 m cubic atrium,” Building and Environment, vol. 44, no. 9, pp. 1827–1839, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Zhang, G. Zhu, and L. Huang, “Experiment and theoretical model for the temperature development in steel members exposed to fire in the large space building,” Journal of China University of Mining and Technolgy, vol. 42, no. 3, pp. 370–374, 2013. View at Google Scholar
  14. C. L. Shi, M. H. Zhong, T. R. Fu, L. He, and R. Huo, “An investigation on spill plume temperature of large space building fires,” Journal of Loss Prevention in the Process Industries, vol. 22, no. 1, pp. 76–85, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Wald, L. Simões da Silva, D. B. Moore et al., “Experimental behaviour of a steel structure under natural fire,” Fire Safety Journal, vol. 41, no. 7, pp. 509–522, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. SFPE Handbook of Fire Protection Engineering, National Fire Protection Association, Quincy, Mass, USA, 1988.
  17. National Fire Protection Association, NFPA 204: Standard For Smoke and Heat Venting, National Fire Protection Association, 2002.
  18. K. B. McGrattan and G. P. Forney, Fire Dynamics Simulator: User's Manual, US Department of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.
  19. W. Xue and G.-J. Zhang, “FDS fire simulation and application,” Jilin Forestry Science and Technology, vol. 6, pp. 4–8, 2006. View at Google Scholar
  20. T. G. Ma and J. G. Quintiere, “Numerical simulation of axi-symmetric fire plumes: accuracy and limitations,” Fire Safety Journal, vol. 38, no. 5, pp. 467–492, 2003. View at Publisher · View at Google Scholar · View at Scopus
  21. T.-S. Shen, Y.-H. Huang, and S.-W. Chien, “Using fire dynamic simulation (FDS) to reconstruct an arson fire scene,” Building and Environment, vol. 43, no. 6, pp. 1036–1045, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Zhang, G. Zhu, G. Yuan et al., “Temperature model of steel members exposed to thermal radiation and fire in large space building,” Journal of Harbin Institute of Technology, vol. 45, no. 6, pp. 96–101, 2013. View at Google Scholar
  23. Y. Du and G. Li, “A new temperature-time curve for fire-resistance analysis of structures,” Fire Safety Journal, vol. 54, pp. 113–120, 2012. View at Google Scholar