Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 273693, 13 pages
http://dx.doi.org/10.1155/2014/273693
Research Article

Semiempirical Methodology for Estimating the Service Life of Concrete Deck Panels Strengthened with Fiber-Reinforced Polymer

1Department of Civil Engineering, Gyeongnam National University of Science and Technology, 150 Chilam-dong, Jinju, Gyeongnam 660-758, Republic of Korea
2Department of Civil and Environmental Engineering, Hanyang University, 1271 Sa1-dong, Ansan-si, Gyeonggi-do 425-791, Republic of Korea

Received 25 November 2013; Revised 26 February 2014; Accepted 26 February 2014; Published 26 March 2014

Academic Editor: Ting-Hua Yi

Copyright © 2014 Eon-Kyoung Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. N. Swamy, R. Jones, and J. W. Bloxham, “Structural behavior of reinforced concrete beams strengthened by epoxy-bonded steel plates,” The Structural Engineer, vol. 65, no. 2, pp. 59–68, 1987. View at Google Scholar · View at Scopus
  2. H. Saadatmanesh and M. R. Ehsani, “RC beams strengthened with GFRP plates. I. Experimental study,” Journal of the Structural Engineering, vol. 117, no. 11, pp. 3417–3433, 1991. View at Google Scholar · View at Scopus
  3. J. G. Teng, S. Y. Cao, and L. Lam, “Behaviour of GFRP-strengthened RC cantilever slabs,” Construction and Building Materials, vol. 15, no. 7, pp. 339–349, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. B. Zhang, R. Masmoudi, and B. Benmokrane, “Behaviour of one-way concrete slabs reinforced with CFRP grid reinforcements,” Construction and Building Materials, vol. 18, no. 8, pp. 625–635, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. I. Liu, D. J. Oehlers, R. Seracino, and G. Ju, “Moment redistribution parametric study of CFRP, GFRP and steel surface plated RC beams and slabs,” Construction and Building Materials, vol. 20, no. 1-2, pp. 59–70, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. ISIS Canada, “Strengthening Reinforced Concrete structures with externally-bonded fibre reinforced polymers,” Design Manual 4, ISIS Canada, 2001. View at Google Scholar
  7. American Concrete Linstitute, “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures,” ACI Committee 440-F Draft Document, 2000. View at Google Scholar
  8. S. K. Yoon, A study on the fatigue behavior and the fatigue design of the reinforced concrete deck slabs of the composite bridges [Ph.D. dissertation], Seoul National University, 1996.
  9. Korea’s Ministry of Construction and Transportation, Annual Statistics Report of Road Traffic Density, 2000.
  10. P. C. Perdikaris, S. R. Beim, and S. N. Bousias, “Slab continuity effect on ultimate and fatigue strength of reinforced concrete bridge deck models,” ACI Structural Journal, vol. 86, no. 4, pp. 483–491, 1989. View at Google Scholar · View at Scopus
  11. Y. Maeda and S. Matsui, “Load-carrying capacity and remaining life of first-built composite Girder Bridge in Japan,” in Proceedings of the Composite and Mixed Construction, pp. 50–59, 1985.
  12. J. R. Yost and E. R. Schmeckpeper, “Strength and serviceability of FRP grid reinforced bridge decks,” Journal of Bridge Engineering, vol. 6, no. 6, pp. 605–612, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Li, T. Yi, M. Gu, and L. Huo, “Evaluation of earthquake-induced structural damages by wavelet transform,” Progress in Natural Science, vol. 19, no. 4, pp. 461–470, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Sim and H. Oh, “Structural behavior of strengthened bridge deck specimens under fatigue loading,” Engineering Structures, vol. 26, no. 14, pp. 2219–2230, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. B. H. Oh, “Fatigue-life distributions of concrete for various stress levels,” ACI Materials Journal, vol. 88, no. 2, pp. 122–128, 1991. View at Google Scholar · View at Scopus
  16. J. A. Collins, Fatigue of Materials in Mechanical Design, John Wiley & Sons, New York, NY, USA, 1981.
  17. H. Oh, J. Sim, and C. Meyer, “Fatigue life of damaged bridge deck panels strengthened with carbon fiber sheets,” ACI Structural Journal, vol. 102, no. 1, pp. 85–92, 2005. View at Google Scholar · View at Scopus
  18. P. C. Perdikaris and S. R. Beim, “RC bridge decks under pulsating and moving load,” Journal of the Structural Engineering, vol. 114, no. 3, pp. 591–607, 1988. View at Google Scholar · View at Scopus
  19. H. S. Shang, T. H. Yi, and L. S. Yang, “Experimental study on the compressive strength of big mobility concrete with nondestructive testing method,” Advances in Materials Science and Engineering, vol. 2012, Article ID 345214, 6 pages, 2012. View at Publisher · View at Google Scholar
  20. T. H. Yi, H. N. Li, and H. M. Sun, “Multi-stage structural damage diagnosis method based on, “energy-damage” theory,” Smart Structures and Systems, vol. 12, no. 3-4, pp. 345–361, 2013. View at Google Scholar
  21. H. Oh, J. Sim, and C. Meyer, “Experimental assessment of bridge deck panels strengthened with carbon fiber sheets,” Composites B: Engineering, vol. 34, no. 6, pp. 527–538, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. C. G. Schilling and K. H. Klippstein, “Fatigue of steel beams by simulated bridge traffic,” Proceedings of ASCE, vol. 103, no. 8, pp. 1561–1575, 1977. View at Google Scholar · View at Scopus
  23. C. G. Schilling, “Stress cycle of design of steel bridge,” Journal of the Structural Engineering, vol. 110, no. 6, pp. 1222–1234, 1984. View at Google Scholar · View at Scopus
  24. American Association of State Highway and Transportation Officials, Standard Specifications for Highway Bridges, AASHTO, Washington, DC, USA, 16th edition, 1996.
  25. Korea’s Ministry of Construction and Transportation, Korean Highway Design Specification, 1996.
  26. S. W. Collins and K. R. Nowak, “Reliability of highway girder bridges,” Journal of the Structural Engineering, vol. 117, no. 8, pp. 2372–2388, 1991. View at Google Scholar · View at Scopus
  27. A. S. Nowak, A. S. Yamani, and S. W. Tabsh, “Probabilistic models for resistance of concrete bridge girders,” ACI Structural Journal, vol. 91, no. 3, pp. 269–276, 1994. View at Google Scholar · View at Scopus
  28. E. J. Gumbull, Static of Extreme, Columbia University Press, New York, NY, USA, 1958.
  29. J. P. T. Yao, “Fatigue reliability and design,” ASCE Journal of the Structural Division, vol. 100, 1974. View at Google Scholar
  30. J. R. Benjamin and C. A. Cornell, Probability, Statics, and Decision for Civil Engineers, McGraw Hill, New York, NY, USA, 1970.
  31. K. C. Kapur and L. R. Lamberson, Reliability in Engineering Design, John Wiley & Sons, New York, NY, USA, 1997.