Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 291461, 13 pages
http://dx.doi.org/10.1155/2014/291461
Research Article

Parameters Separated Calibration Based on Particle Swarm Optimization for a Camera and a Laser-Rangefinder Information Fusion

1School of Information Science and Engineering, Central South University, Changsha 410083, China
2School of Computer and Information Engineering, Hunan University of Commerce, Changsha 410205, China

Received 27 March 2014; Revised 31 May 2014; Accepted 2 June 2014; Published 2 July 2014

Academic Editor: Youqing Wang

Copyright © 2014 Kaijun Zhou and Lingli Yu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Chen, Z. Chen, and S. G. Wei, “Research on point cloud data segmentation based on extrinsic calibration of laser and CCD,” Microcomputer Information, no. 7, pp. 295–297, 2008. View at Google Scholar
  2. C. Chen and H. Chien, “Geometric calibration of a multi-layer LiDAR system and image sensors using plane-based implicit laser parameters for textured 3-D depth reconstruction,” Journal of Visual Communication and Image Representation, vol. 25, no. 4, pp. 659–669, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. L. Yu, Z. Cai, Z. Zhi, and Z. Feng, “Fault detection and identification for dead reckoning system of mobile robot based on fuzzy logic particle filter,” Journal of Central South University of Technology, vol. 19, no. 5, pp. 1249–1257, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. L. Jiang, X. Hao, and W. Zhang, “A study on the calibration of pitch angle deviation for airborne Lidar system,” in The International Society for Optical Engineering, Laser Radar Technology and Applications XVIII, vol. 8731 of Proceedings of SPIE, Baltimore, Md, USA, May 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. Q. L. Zhang and R. Pless, “Extrinsic calibration of a camera and laser range finder (improves camera calibration),” in Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '04), pp. 2301–2306, Sendai, Japan, October 2004. View at Scopus
  6. F. Vasconcelos, J. P. Barreto, and U. Nunes, “A minimal solution for the extrinsic calibration of a camera and a laser-rangefinder,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 34, no. 11, pp. 2097–2107, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Liu, F. J. Li, and G. J. Zhang, “An external parameter calibration method for multiple cameras based on laser rangefinder,” Measurement, vol. 47, no. 1, pp. 954–962, 2014. View at Publisher · View at Google Scholar
  8. L. Mazzei, P. Medici, and M. Panciroli, “A lasers and cameras calibration procedure for VIAC multi-sensorized vehicles,” in Proceedings of the IEEE Intelligent Vehicles Symposium (IV '12), pp. 548–553, Alcala de Henares Madrid, Spain, June 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Gao and J. R. Spletzer, “On-line calibration of multiple LIDARs on a mobile vehicle platform,” in Proceedings of the IEEE International Conference on Robotics and Automation (ICRA '10), pp. 279–284, Anchorage, Alaska, USA, May 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Gao, J. Duan, X. Yang, and B. Zheng, “A method of spatial calibration for camera and radar,” in Proceedings of the 8th World Congress on Intelligent Control and Automation (WCICA '10), pp. 6211–6215, Jinan, China, July 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. L. L. Yu, P. Meng, and Z. You, “Separated calibration of a camera and a laser-finder for robotic heterogeneous sensors,” International Journal of Advanced Robotic Systems, no. 10, pp. 1–12, 2013. View at Google Scholar
  12. K. Ohtani, L. Li, and M. Baba, “Laser rangefinder calibration based on genetic algorithm,” in Proceedings of the 51st Annual Conference on of the Society of Instrument and Control Engineers of Japan (SICE '12), pp. 1234–1237, Akita, Japan, August 2012. View at Scopus
  13. LMS Technical Description, http://sicktoolbox.sourceforge.net/docs/sick-lms-technical-description.pdf .
  14. J. Ha, “Extrinsic calibration of a camera and laser range finder using a new calibration structure of a plane with a triangular hole,” International Journal of Control, Automation and Systems, vol. 10, no. 6, pp. 1240–1244, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Shin, J. Park, J. Bae, and M. Baeg, “A study on reliability enhancement for laser and camera calibration,” International Journal of Control, Automation and Systems, vol. 10, no. 1, pp. 109–116, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Rahman and N. Krouglicof, “An efficient camera calibration technique offering robustness and accuracy over a wide range of lens distortion,” IEEE Transactions on Image Processing, vol. 21, no. 2, pp. 626–637, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  17. T. J. Osgood and Y. Huang, “Calibration of laser scanner and camera fusion system for intelligent vehicles using Nelder-Mead optimization,” Measurement Science and Technology, vol. 24, no. 3, Article ID 035101, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. Camera Calibration Toolbox for Matlab, http://www.vision.caltech.edu/bouguetj/calib_doc/.