Research Article
A Mathematical Modeling to Predict the Cutting Forces in Microdrilling
Table 2
Basic parameters of microdrill.
| Geometric feature | Value |
| Diameter (mm) | 0.5 | Flute length (mm) | 5.0 | Helix angle (°) | 25 | Web thickness (mm) | 0.15 | Web taper (mm/mm) | 0.03 | Point angle (°) | 130 | Primary face angle (°) | 12 | Chisel edge angle (°) | 42.8 | Major cutting edge radius (m) | 2 | Second cutting edge radius (m) | 3 |
|
|