Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 638209, 19 pages
http://dx.doi.org/10.1155/2014/638209
Review Article

A Summary Review of Correlations between Temperatures and Vibration Properties of Long-Span Bridges

1College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, China
2School of Civil Engineering, Dalian University of Technology, Dalian 116023, China
3State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China

Received 8 January 2014; Accepted 6 March 2014; Published 13 April 2014

Academic Editor: Hua-Peng Chen

Copyright © 2014 Guang-Dong Zhou and Ting-Hua Yi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. W. Chen, Y. L. Xu, and X. M. Wang, “SHMS-based fatigue reliability analysis of multiloading suspension bridges,” Journal of Structural Engineering, vol. 138, no. 3, pp. 299–307, 2011. View at Google Scholar
  2. Z. W. Chen, Y. L. Xu, Q. Li, and D. J. Wu, “Dynamic stress analysis of long suspension bridges under wind, railway, and highway loadings,” Journal of Bridge Engineering, vol. 16, no. 3, pp. 383–391, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. T. H. Yi, H. N. Li, and M. Gu, “Wavelet based multi-step filtering method for bridge health monitoring using GPS and accelerometer,” Smart Structures and Systems, vol. 11, no. 4, pp. 331–348, 2013. View at Google Scholar
  4. K. Wardhana and F. C. Hadipriono, “Analysis of recent bridge failures in the United States,” Journal of Performance of Constructed Facilities, vol. 17, no. 3, pp. 144–150, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. B. F. Spencer Jr. and S. Cho, “Wireless smart sensor technology for monitoring civil infrastructure: technological developments and full-scale applications,” in Proceedings of the World Congress on Advances in Structural Engineering and Mechanics (ASEM ’11), Seoul, Republic of Korea, 2011.
  6. T. H. Yi, H. N. Li, and M. Gu, “Experimental assessment of high-rate GPS receivers for deformation monitoring of bridge,” Measurement, vol. 46, no. 1, pp. 420–432, 2013. View at Google Scholar
  7. T. Yi, H. Li, and M. Gu, “Full-scale measurements of dynamic response of suspension bridge subjected to environmental loads using GPS technology,” Science China Technological Sciences, vol. 53, no. 2, pp. 469–479, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. T. H. Yi, H. N. Li, and M. Gu, “Recent research and applications of GPS based technology for bridge health monitoring,” Science China Technological Sciences, vol. 53, no. 10, pp. 2597–2610, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. G. D. Zhou and T. H. Yi, “Recent developments on wireless sensor networks technology for bridge health monitoring,” Mathematical Problems in Engineering, vol. 2013, Article ID 947867, 33 pages, 2013. View at Publisher · View at Google Scholar
  10. G. D. Zhou and T. H. Yi, “The nonuniform node configuration of wireless sensor networks for long-span bridge health monitoring,” International Journal of Distributed Sensor Networks, vol. 2013, Article ID 797650, 9 pages, 2013. View at Publisher · View at Google Scholar
  11. Y. Q. Ni, X. W. Ye, and J. M. Ko, “Monitoring-based fatigue reliability assessment of steel bridges: analytical model and application,” Journal of Structural Engineering, vol. 136, no. 12, pp. 1563–1573, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. J. M. Ko and Y. Q. Ni, “Technology developments in structural health monitoring of large-scale bridges,” Engineering Structures, vol. 27, no. 12, pp. 1715–1725, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Q. Ni, X. W. Ye, and J. M. Ko, “Modeling of stress spectrum using long-term monitoring data and finite mixture distributions,” Journal of Engineering Mechanics, vol. 138, no. 2, pp. 175–183, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. S. W. Doebling, C. R. Farrar, and M. B. Prime, “A summary review of vibration-based damage identification methods,” Shock and Vibration Digest, vol. 30, no. 2, pp. 91–105, 1998. View at Google Scholar · View at Scopus
  15. P. J. S. Cruz and R. Salgado, “Performance of vibration-based damage detection methods in bridges,” Computer-Aided Civil and Infrastructure Engineering, vol. 24, no. 1, pp. 62–79, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. G. D. Zhou and T. H. Yi, “The node arrangement methodology of wireless sensor networks for long-span bridge health monitoring,” International Journal of Distributed Sensor Networks, vol. 2013, Article ID 865324, 8 pages, 2013. View at Publisher · View at Google Scholar
  17. C. Liu and J. T. DeWolf, “Effect of temperature on modal variability of a curved concrete bridge under ambient loads,” Journal of Structural Engineering, vol. 133, no. 12, pp. 1742–1751, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Zou, L. Tong, and G. P. Steven, “Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures—a review,” Journal of Sound and Vibration, vol. 230, no. 2, pp. 357–378, 2000. View at Publisher · View at Google Scholar · View at Scopus
  19. J.-T. Kim, Y.-S. Ryu, H.-M. Cho, and N. Stubbs, “Damage identification in beam-type structures: frequency-based method vs mode-shape-based method,” Engineering Structures, vol. 25, no. 1, pp. 57–67, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. A. Alvandi and C. Cremona, “Assessment of vibration-based damage identification techniques,” Journal of Sound and Vibration, vol. 292, no. 1-2, pp. 179–202, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. I. Talebinejad, C. Fischer, and F. Ansari, “Numerical evaluation of vibration-based methods for damage assessment of cable-stayed bridges,” Computer-Aided Civil and Infrastructure Engineering, vol. 26, no. 3, pp. 239–251, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. H. Li, S. Li, J. Ou, and H. Li, “Modal identification of bridges under varying environmental conditions: temperature and wind effects,” Structural Control and Health Monitoring, vol. 17, no. 5, pp. 495–512, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. P. Cawley, “Long range inspection of structures using low frequency ultrasound,” in Structural Damage Assessment Using Advanced Signal Processing Procedures, University of Sheffield, Sheffield, UK, 1997. View at Google Scholar
  24. G. D. Zhou and T. H. Yi, “Thermal load in large-scale bridges: a state-of-the-art review,” International Journal of Distributed Sensor Networks, vol. 2013, Article ID 217983, 17 pages, 2013. View at Publisher · View at Google Scholar
  25. Y. L. Xu, B. Chen, C. L. Ng, K. Y. Wong, and W. Y. Chan, “Monitoring temperature effect on a long suspension bridge,” Structural Control and Health Monitoring, vol. 17, no. 6, pp. 632–653, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. A. B. Siddique, B. F. Sparling, and L. D. Wegner, “Assessment of vibration-based damage detection for an integral abutment bridge,” Canadian Journal of Civil Engineering, vol. 34, no. 3, pp. 438–452, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. J.-T. Kim, J.-H. Park, and B.-J. Lee, “Vibration-based damage monitoring in model plate-girder bridges under uncertain temperature conditions,” Engineering Structures, vol. 29, no. 7, pp. 1354–1365, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Xia, Y.-L. Xu, Z.-L. Wei, H.-P. Zhu, and X.-Q. Zhou, “Variation of structural vibration characteristics versus non-uniform temperature distribution,” Engineering Structures, vol. 33, no. 1, pp. 146–153, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. I. Gonzales, M. Ulker-Kaustell, and R. Karoumi, “Seasonal effects on the stiffness properties of a ballasted railway bridge,” Engineering Structures, vol. 57, pp. 63–72, 2013. View at Google Scholar
  30. Y. Xia, B. Chen, S. Weng, Y. Q. Ni, and Y. L. Xu, “Temperature effect on vibration properties of civil structures: a literature review and case studies,” Journal of Civil Structural Health Monitoring, vol. 2, no. 1, pp. 29–46, 2012. View at Google Scholar
  31. H. Sohn, M. Dzwonczyk, E. G. Straser, A. S. Kiremidjian, K. Law, and T. Meng, “An experimental study of temperature effect on modal parameters of the Alamosa Canyon Bridge,” Earthquake Engineering and Structural Dynamics, vol. 28, no. 7-8, pp. 879–897, 1999. View at Google Scholar · View at Scopus
  32. P. Moser and B. Moaveni, “Environmental effects on the identified natural frequencies of the Dowling Hall Footbridge,” Mechanical Systems and Signal Processing, vol. 25, no. 7, pp. 2336–2357, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. Y. Q. Ni, H. F. Zhou, and J. M. Ko, “Generalization capability of neural network models for temperature- frequency correlation using monitoring data,” Journal of Structural Engineering, vol. 135, no. 10, pp. 1290–1300, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. Y. Xia, H. Hao, G. Zanardo, and A. Deeks, “Long term vibration monitoring of an RC slab: temperature and humidity effect,” Engineering Structures, vol. 28, no. 3, pp. 441–452, 2006. View at Publisher · View at Google Scholar · View at Scopus
  35. R. W. Clough and J. Penzien, Dynamics of Structure, McGraw-Hill, New York, NY, USA, 2nd edition, 1993.
  36. Y. Fu and J. T. DeWolf, “Monitoring and analysis of a bridge with partially restrained bearings,” Journal of Bridge Engineering, vol. 6, no. 1, pp. 23–29, 2001. View at Publisher · View at Google Scholar · View at Scopus
  37. J. H. G. Macdonald and W. E. Daniell, “Variation of modal parameters of a cable-stayed bridge identified from ambient vibration measurements and FE modelling,” Engineering Structures, vol. 27, no. 13, pp. 1916–1930, 2005. View at Publisher · View at Google Scholar · View at Scopus
  38. Z.-D. Xu and Z. Wu, “Simulation of the effect of temperature variation on damage detection in a long-span cable-stayed bridge,” Structural Health Monitoring, vol. 6, no. 3, pp. 177–189, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. É. Balmès, M. Basseville, L. Mevel, and H. Nasser, “Handling the temperature effect in vibration monitoring of civil structures: a combined subspace-based and nuisance rejection approach,” Control Engineering Practice, vol. 17, no. 1, pp. 80–87, 2009. View at Publisher · View at Google Scholar · View at Scopus
  40. C. Miao, L. Chen, and Z. Feng, “Study on effects of environmental temperature on dynamic characteristics of Taizhou Yangtze River Bridge,” Engineering Science, vol. 9, no. 2, pp. 79–84, 2011. View at Google Scholar
  41. É. Balmès, M. Basseville, F. Bourquin, L. Mevel, H. Nasser, and F. Treyssède, “Merging sensor data from multiple temperature scenarios for vibration monitoring of civil structures,” Structural Health Monitoring, vol. 7, no. 2, pp. 129–142, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. L. M. Sun and Z. H. Min, “Evaluations on dynamic behaviors and its environmental influence factors of bridge based on long term monitoring,” in Proceedings of the 4th International Symposium on Lifetime Engineering of Civil Infrastructure, Changsha, China, 2009.
  43. L. Sun, Y. Zhou, and X. Li, “Correlation study on modal frequency and temperature effects of a cable-stayed bridge model,” Advanced Materials Research, vol. 446–449, pp. 3264–3272, 2012. View at Publisher · View at Google Scholar · View at Scopus
  44. Y. Xia, B. Chen, X.-Q. Zhou, and Y.-L. Xu, “Field monitoring and numerical analysis of Tsing Ma Suspension Bridge temperature behavior,” Structural Control and Health Monitoring, vol. 20, no. 4, pp. 560–575, 2013. View at Publisher · View at Google Scholar · View at Scopus
  45. J. D. Turner, An experimental and theoretical study of dynamic methods of bridge conditioning monitoring [Ph.D. thesis], University of Reading, Berkshire, UK, 1984.
  46. J. D. Turner and A. J. Pretlove, “A study of the spectrum of traffic-induced bridge vibration,” Journal of Sound and Vibration, vol. 122, no. 1, pp. 31–42, 1988. View at Google Scholar · View at Scopus
  47. V. Askegaard and P. Mossing, “Long term observation of RC-bridge using changes in natural frequency,” Nordic Concrete Research, no. 7, pp. 20–27, 1988. View at Google Scholar · View at Scopus
  48. M. G. Wood, Damage analysis of bridge structures using vibrational techniques [Ph.D. thesis], Aston University, 1992.
  49. R. G. Rohrmann and W. F. Rucker, “Surveillance of structural properties of large bridges using dynamic methods,” in Proceedings of 6th International Conference on Structural Safety and Reliability, pp. 977–980, 1994.
  50. W. F. Rucker, S. Said, R. G. Rohrmann, and W. Schmid, “Load and condition monitoring of a highway bridge in a continuous manner,” in Proceedings of the IABSE Symposium on Extending the Lifespan of Structures, vol. 73, San Francisco, Calif, USA, 1995.
  51. J. T. DeWolf, P. E. Conn, and P. N. O'leary, “Continuous monitoring of bridge structures,” in Proceedings of the International Association for Bridge and Structural Engineering Symposium (IABSE '95), pp. 934–940, 1995.
  52. J. Zhao and J. T. Dewolf, “Dynamic monitoring of steel girder highway bridge,” Journal of Bridge Engineering, vol. 7, no. 6, pp. 350–356, 2002. View at Publisher · View at Google Scholar · View at Scopus
  53. C. R. Farrar, S. W. Doebling, P. J. Cornwell, and E. G. Straser, “Variability of modal parameters measured on the Alamosa Canyon Bridge,” in Proceedings of the 15th International Modal Analysis Conference (IMAC '97), pp. 257–263, February 1997. View at Scopus
  54. S. W. Doebling and C. R. Farrar, “Using statistical analysis to enhance modal-based damage identification,” in Proceedings of the Structural Damage Assessment Using Advanced Signal Processing Procedures, pp. 199–210, 1997.
  55. P. Cornwell, C. R. Farrar, S. W. Doebling, and H. Sohn, “Environmental variability of modal properties,” Experimental Techniques, vol. 23, no. 6, pp. 45–48, 1999. View at Google Scholar · View at Scopus
  56. C. R. Farrar and D. A. Jauregui, “Comparative study of damage identification algorithms applied to a bridge: I. Experiment,” Smart Materials and Structures, vol. 7, no. 5, pp. 704–719, 1998. View at Publisher · View at Google Scholar · View at Scopus
  57. M. A. Wahab and G. De Roeck, “Effect of temperature on dynamic system parameters of a highway bridge,” Structural Engineering International, vol. 7, no. 4, pp. 266–270, 1997. View at Google Scholar · View at Scopus
  58. G. P. Roberts and A. J. Pearson, “Health monitoring of structures-towards a stethoscope for bridges,” in Proceedings of the International Seminar on Modal Analysis, vol. 2, pp. 947–952, 1999.
  59. S. Alampalli, “Influence of in-service environment on modal parameters,” in Proceedings of the 16th International Modal Analysis Conference (IMAC '98), pp. 111–116, February 1998. View at Scopus
  60. R. G. Rohrmann, M. Baessler, S. Said, W. Schmid, and W. F. Ruecker, “Structural causes of temperature affected modal data of civil structures obtained by long time monitoring,” in Society of Photo-Optical Instrumentation Engineers, SPIE Proceedings Series, pp. 1–7, February 2000. View at Scopus
  61. J. Maeck, B. Peeters, and G. De Roeck, “Damage identification on the Z24-bridge using vibration monitoring analysis,” in Proceedings of European COST F3 Conference on System Identification and Structural Health Monitoring, pp. 233–242, 2000.
  62. B. Peeters and G. De Roeck, “One-year monitoring of the Z24-Bridge: environmental effects versus damage events,” Earthquake Engineering & Structural Dynamics, vol. 30, no. 2, pp. 149–171, 2001. View at Google Scholar
  63. B. Peeters, J. Maeck, and G. De Roeck, “Vibration-based damage detection in civil engineering: excitation sources and temperature effects,” Smart Materials and Structures, vol. 10, no. 3, pp. 518–527, 2001. View at Publisher · View at Google Scholar · View at Scopus
  64. Y. Q. Ni, X. G. Hua, K. Q. Fan, and J. M. Ko, “Correlating modal properties with temperature using long-term monitoring data and support vector machine technique,” Engineering Structures, vol. 27, no. 12, pp. 1762–1773, 2005. View at Publisher · View at Google Scholar · View at Scopus
  65. S. L. Desjardins, N. A. Londoño, D. T. Lau, and H. Khoo, “Real-time data processing, analysis and visualization for structural monitoring of the confederation bridge,” Advances in Structural Engineering, vol. 9, no. 1, pp. 141–157, 2006. View at Publisher · View at Google Scholar · View at Scopus
  66. C. Liu and J. T. DeWolf, “Effect of temperature on modal variability for a curved concrete bridge,” in Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 6174 of Proceedings of SPIE, March 2006. View at Publisher · View at Google Scholar · View at Scopus
  67. J.-T. Kim, W.-B. Na, J.-H. Park, and J.-S. Lee, “Structural health monitoring and risk alarming in plate-girder bridges under uncertain temperature condition,” in Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 5765 of Proceedings of SPIE, pp. 1002–1011, San Diego, Calif, USA, March 2005. View at Publisher · View at Google Scholar · View at Scopus
  68. Y. L. Ding and A. Q. Li, “Temperature-induced variations of measured modal frequencies of steel box girder for a long-span suspension bridge,” International Journal of Steel Structures, vol. 11, no. 2, pp. 145–155, 2011. View at Publisher · View at Google Scholar · View at Scopus
  69. Y. L. Ding, A. Q. Li, and F. F. Geng, “Variability of measured modal frequencies of a suspension bridge under actual environmental effects,” in Proceedings of the 5th International Conference on Bridge Maintenance, Safety and Management (IABMAS '10), pp. 1392–1398, Lehigh University, July 2010. View at Scopus
  70. A. A. Mosavi, R. Seracino, and S. Rizkalla, “Effect of temperature on daily modal variability of a steel-concrete composite bridge,” Journal of Bridge Engineering, vol. 17, no. 6, pp. 979–983, 2012. View at Google Scholar
  71. G. M. Lloyd, M. L. Wang, and V. Singh, “Observed variations of mode frequencies of a prestressed concrete bridge with temperature,” in Proceedings of the 14th Engineering Mechanics Conference, pp. 179–189, American Society of Civil Engineers, May 2000. View at Publisher · View at Google Scholar · View at Scopus
  72. G. M. Lloyd, M. L. Wang, and V. Singh, “Observed variations of mode frequencies of a prestressed concrete bridge with temperature,” in Condition Monitoring of Materials and Structures, pp. 179–189, 2000. View at Google Scholar
  73. J. Kullaa, “Eliminating environmental influences in structural health monitoring using spatiotemporal correlation models,” in Proceedings of the 1st European Workshop on Structural Health Monitoring, pp. 742–749, 2002. View at Scopus
  74. M. Breccolotti, G. Franceschini, and A. L. Materazzi, “Sensitivity of dynamic methods for damage detection in structural concrete bridges,” Shock and Vibration, vol. 11, no. 3-4, pp. 383–394, 2004. View at Google Scholar · View at Scopus
  75. W. Song and S. J. Dyke, “Ambient vibration based modal identification of the Emerson bridge considering temperature effects,” in Proceedings of the 4th World Conference on Structural Control and Monitoring, pp. 11–13, 2006.
  76. Z. J. Yang, U. Dutta, D. Zhu, E. Marx, and N. Biswas, “Seasonal frost effects on the soil-foundation-structure interaction system,” Journal of Cold Regions Engineering, vol. 21, no. 4, pp. 108–120, 2007. View at Publisher · View at Google Scholar · View at Scopus
  77. S. K. Di, L. X. Wang, H. Li, and Z. S. Wu, “Stochastic subspace identification research of concrete girders considering temperature influence,” in Proceedings of the 4th International Symposium on Environment Vibrations-Prediction, Monitoring, Mitigation and Evaluation, Beijing, China, 2009.
  78. V. Zabel, M. Brehm, and S. Nikulla, “The influence of temperature varying material parameters on the dynamic behavior of short span railway bridges,” in Proceedings of the 24th International Conference on Noise and Vibration Engineering, Leuven, Belgium, 2010.
  79. L. Wang, J. L. Hou, and J. P. Ou, “Temperature effect on modal frequencies for a rigid continuous bridge based on long term monitoring,” in Conference on Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland, Proceedings of SPIE, 2011.
  80. A. Cury, C. Cremona, and J. Dumoulin, “Long-term monitoring of a PSC box girder bridge: operational modal analysis, data normalization and structural modification assessment,” Mechanical Systems and Signal Processing, vol. 33, pp. 13–37, 2012. View at Google Scholar
  81. K. Y. Koo, J. M. W. Brownjohn, D. I. List, and R. Cole, “Structural health monitoring of the Tamar suspension bridge,” Structural Control and Health Monitoring, vol. 20, no. 4, pp. 609–625, 2013. View at Publisher · View at Google Scholar · View at Scopus
  82. H. Sohn, M. Dzwonczyk, E. G. Straser, K. H. Law, T. Meng, and A. S. Kiremidjian, “Adaptive modeling of environmental effects in modal parameters for damage detection in civil structures,” in Proceedings of the 5th Annual International Symposium on Smart Structures and Materials, pp. 127–138, International Society for Optics and Photonics, March 1998. View at Publisher · View at Google Scholar · View at Scopus
  83. H. Sohn, “Effects of environmental and operational variability on structural health monitoring,” Philosophical Transactions of the Royal Society A, vol. 365, no. 1851, pp. 539–560, 2007. View at Publisher · View at Google Scholar · View at Scopus
  84. C. Liu, J. T. DeWolf, and J.-H. Kim, “Development of a baseline for structural health monitoring for a curved post-tensioned concrete box-girder bridge,” Engineering Structures, vol. 31, no. 12, pp. 3107–3115, 2009. View at Publisher · View at Google Scholar · View at Scopus
  85. B. Moaveni and I. Behmanesh, “Effects of changing ambient temperature on finite element model updating of the Dowling Hall Footbridge,” Engineering Structures, vol. 43, pp. 58–68, 2012. View at Publisher · View at Google Scholar
  86. X. G. Hua, Y. Q. Ni, J. M. Ko, and K. Y. Wong, “Modeling of temperature-frequency correlation using combined principal component analysis and support vector regression technique,” Journal of Computing in Civil Engineering, vol. 21, no. 2, pp. 122–135, 2007. View at Publisher · View at Google Scholar · View at Scopus
  87. C. H. Loh and M. C. Chen, “Modeling of environmental effects for vibration-based shm using recursive stochastic subspace identification analysis,” in Proceedings of the 4th Asia-Pacific Workshop on Structural Health Monitoring, Melbourne, Australia, 2013.
  88. H. F. Zhou, Y. Q. Ni, and J. M. Ko, “Eliminating temperature effect in vibration-based structural damage detection,” Journal of Engineering Mechanics, vol. 137, no. 12, pp. 785–796, 2012. View at Publisher · View at Google Scholar · View at Scopus
  89. H. F. Zhou, Y. Q. Ni, and J. M. Ko, “Constructing input to neural networks for modeling temperature-caused modal variability: mean temperatures, effective temperatures, and principal components of temperatures,” Engineering Structures, vol. 32, no. 6, pp. 1747–1759, 2010. View at Publisher · View at Google Scholar · View at Scopus