Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 639867, 15 pages
http://dx.doi.org/10.1155/2014/639867
Research Article

Assessment on Time-Varying Thermal Loading of Engineering Structures Based on a New Solar Radiation Model

1Key Laboratory of Roadway Bridge and Structural Engineering, Wuhan University of Technology, Wuhan 430070, China
2School of Civil Engineering and Architecture, Zhongyuan University of Technology, Zhengzhou 450007, China
3Zhongshan Power Supply Bureau, Guangdong 528400, China

Received 25 December 2013; Revised 9 February 2014; Accepted 10 February 2014; Published 18 March 2014

Academic Editor: Ting-Hua Yi

Copyright © 2014 Bo Chen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. D. Zhou and T. H. Yi, “Thermal load in large-scale bridges: a state-of-the-art review,” International Journal of Distributed Sensor Networks, vol. 2013, Article ID 217983, 17 pages, 2013. View at Publisher · View at Google Scholar
  2. T. Yi, H. Li, and M. Gu, “Full-scale measurements of dynamic response of suspension bridge subjected to environmental loads using GPS technology,” Science China Technological Sciences, vol. 53, no. 2, pp. 469–479, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. B. Chen, Y. L. Xu, and X. Zhao, “Integrated vibration control and health monitoring of building structures: a time-domain approach,” Smart Structures and Systems, vol. 6, no. 7, pp. 811–833, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Lei, Y. Jiang, and Z. Xu, “Structural damage detection with limited input and output measurement signals,” Mechanical Systems and Signal Processing, vol. 28, pp. 229–243, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Chen, Z. W. Chen, Y. Z. Sun, and S. L. Zhao, “Condition assessment on thermal effects of a suspension bridge based on SHM oriented model and data,” Mathematical Problems in Engineering, vol. 2013, Article ID 256816, 18 pages, 2013. View at Publisher · View at Google Scholar
  6. W. Zuk, “Thermal behaviour of composite bridges-insulated and uninsulated,” Highway Research Record, no. 76, pp. 231–253, 1965. View at Google Scholar
  7. M. W. R. Capps, The Thermal Behaviour of the Beachley Viaduct/Wye Bridge, TRRL Report LR 234, Ministry of Transport, Road Research Laboratory, Crowthorne, UK, 1968.
  8. A. Churchward and Y. J. Sokal, “Prediction of temperatures in concrete bridges,” Journal of Structural Division, vol. 107, no. 11, pp. 2163–2176, 1981. View at Google Scholar · View at Scopus
  9. M. J. N. Priestley, “Design of concrete bridges for thermal gradients,” ACI Journal, vol. 75, no. 5, pp. 209–217, 1978. View at Google Scholar · View at Scopus
  10. F. Kehlbeck, Einfluss der Sonnenstrahlung bei Bruckenbauwerken, Werner, Dusseldorf, Germany, 1975.
  11. M. M. Elbadry and A. Ghali, “Temperature variation in concrete bridges,” Journal of Structural Engineering, vol. 109, no. 10, pp. 2355–2374, 1983. View at Publisher · View at Google Scholar · View at Scopus
  12. F. A. Branco and P. A. Mendes, “Thermal actions for concrete bridge design,” Journal of Structural Engineering, vol. 119, no. 8, pp. 2313–2331, 1993. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Lei, C. Liu, Y. Q. Jiang, and Y. K. Mao, “Substructure based structural damage detection with limited input and output measurements,” Smart Structures and Systems, vol. 12, no. 6, pp. 619–640, 2013. View at Publisher · View at Google Scholar
  14. Y. L. Xu and B. Chen, “Integrated vibration control and health monitoring of building structures using semi-active friction dampers: part I—methodology,” Engineering Structures, vol. 30, no. 7, pp. 1789–1801, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Chen and Y. L. Xu, “Integrated vibration control and health monitoring of building structures using semi-active friction dampers: part II—numerical investigation,” Engineering Structures, vol. 30, no. 3, pp. 573–587, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. M. A. Shahawy and M. Arockiasamy, “Analytical and measured strains in sunshine skyway bridge. II,” Journal of Bridge Engineering, vol. 1, no. 2, pp. 87–97, 1996. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Fu and J. T. DeWolf, “Effect of differential temperature on a curved post-tensioned concrete bridge,” Advances in Structural Engineering, vol. 7, no. 5, pp. 385–397, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. L. Xu, B. Chen, C. L. Ng, K. Y. Wong, and W. Y. Chan, “Monitoring temperature effect on a long suspension bridge,” Structural Control and Health Monitoring, vol. 17, no. 6, pp. 632–653, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. Xia, B. Chen, S. Weng, Y. Q. Ni, and Y. L. Xu, “Temperature effects on variation properties of civil structures: a review and case studies,” Journal of Civil Structural Health Monitoring, vol. 2, no. 1, pp. 29–46, 2012. View at Publisher · View at Google Scholar
  20. Y. Xia, B. Chen, X.-Q. Zhou, and Y.-L. Xu, “Field monitoring and numerical analysis of Tsing Ma Suspension Bridge temperature behavior,” Structural Control and Health Monitoring, vol. 20, no. 4, pp. 560–575, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. K. Y. Wong, C. K. Lau, and A. R. Flint, “Planning and implementation of the structural health monitoring system for cable-supported bridges in Hong Kong,” in Nondestructive Evaluation of Highways, Utilities, and Pipelines IV, vol. 3995 of Proceedings of SPIE, pp. 266–275, Newport Beach, Calif, USA, March 2000. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Y. Wong, D. K. L. Man, and K. W. Y. Chan, “Thermal load and response monitoring of Ting Kau (Cable-Stayed) bridge,” in Proceedings of the International Conference on Innovation and Sustainable Development of Civil Engineering in the 21st Century, pp. 249–252, Beijing, China, August 2002.
  23. M. Tong, L. G. Tham, F. T. K. Au, and P. K. K. Lee, “Numerical modelling for temperature distribution in steel bridges,” Computers and Structures, vol. 79, no. 6, pp. 583–593, 2001. View at Publisher · View at Google Scholar · View at Scopus
  24. F. T. K. Au, L. G. Tham, M. Tong, and P. K. K. Lee, “Temperature monitoring of steel bridges,” in Health Monitoring and Management of Civil Infrastructure Systems, vol. 4337 of Proceedings of SPIE, pp. 282–291, Newport Beach, Calif, USA, March 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. C. L. Roberts-Wollman, J. E. Breen, and J. Cawrse, “Measurements of thermal gradients and their effects on segmental concrete bridge,” Journal of Bridge Engineering, vol. 7, no. 3, pp. 166–174, 2002. View at Publisher · View at Google Scholar · View at Scopus
  26. S. L. Desjardins, N. A. Londoño, D. T. Lau, and H. Khoo, “Real-time data processing, analysis and visualization for structural monitoring of the confederation bridge,” Advances in Structural Engineering, vol. 9, no. 1, pp. 141–157, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. W. M. Rohsenow, Handbook of Heat Transfer Applications, McGraw-Hill, New York, NY, USA, 1988.
  28. ANSYS 11.0, ANSYS Inc., Southpointe, Pa, USA, 2010.
  29. T.-H. Yi, H.-N. Li, and M. Gu, “Optimal sensor placement for structural health monitoring based on multiple optimization strategies,” Structural Design of Tall and Special Buildings, vol. 20, no. 7, pp. 881–900, 2011. View at Publisher · View at Google Scholar · View at Scopus