Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 712472, 12 pages
http://dx.doi.org/10.1155/2014/712472
Research Article

Modeling and Stability Analysis of Wedge Clutch System

National Lab of Automotive Electronics and Control, Shanghai Jiao Tong University, Shanghai 200240, China

Received 13 January 2014; Accepted 11 April 2014; Published 5 May 2014

Academic Editor: Yuri Vladimirovich Mikhlin

Copyright © 2014 Jian Yao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Liu, X. Chen, P. Cao, and Q. Zhang, “Modelling and Analysis of a Novel Mechanism for EMT Actuator,” Applied Mechanics and Materials, vol. 321–324, pp. 46–50, 2013. View at Google Scholar
  2. U. Wagner, R. Berger, M. Ehrlich et al., “Electromotoric actuators for double clutch transmissions,” in Proceedings of the 8th LuK Symposium, 2006.
  3. J. Wheals, A. Turner, K. Ramsay et al., “Double Clutch Transmission (DCT) using multiplexed linear actuation technology and dry clutches for high efficiency and low cost,” SAE Technical Paper 2007-01-1096, 2007. View at Google Scholar
  4. J. Yao, L. Chen, C. L. Yin et al., “Modeling of a wedge clutch in an automatic transmission,” SAE Technical Paper 2010-01-0186, 2010. View at Google Scholar
  5. A. Turner and K. Ramsay, “Review and development of eectromechanical actuators for improved transmission control and efficiency,” SAE Transactions, vol. 113, pp. 908–919, 2004. View at Google Scholar
  6. N. R. Trevett, X-By-Wire, New Technologies for 42V Bus Automobile of the Future, South Carolina Honors College, 2002.
  7. J. Kim and S. B. Choi, “Design and modeling of a clutch actuator system with self-energizing mechanism,” IEEE/ASME Transactions on Mechatronics, vol. 16, no. 5, pp. 953–966, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Yao, L. Chen, C. L. Yin et al., “Experimental validation of a wedge clutch in automatic transmissions,” in Proceedings of the International Conference on Advanced Vehicle Technologies and Integration, Changchun, China, 2012.
  9. R. Roberts, M. Schaut, H. Hartmann et al., “Modelling and validation of the mechatronic wedge brake,” SAE Transactions, vol. 112, pp. 2376–2386, 2003. View at Google Scholar
  10. P. Liu, H. Zheng, C. Cai et al., “Analysis of disc brake squeal using the complex eigenvalue method,” Applied Acoustics, vol. 68, no. 6, pp. 603–615, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Trichês Júnior, S. N. Y. Gerges, and R. Jordan, “Analysis of brake squeal noise using the finite element method: a parametric study,” Applied Acoustics, vol. 69, no. 2, pp. 147–162, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. K. Shin, M. J. Brennan, J. E. Oh, and C. J. Harris, “Analysis of disc brake noise using a two-degree-of-freedom model,” Journal of Sound and Vibration, vol. 254, no. 5, pp. 837–848, 2002. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Kang, C. M. Krousgrill, and F. Sadeghi, “Comprehensive stability analysis of disc brake vibrations including gyroscopic, negative friction slope and mode-coupling mechanisms,” Journal of Sound and Vibration, vol. 324, no. 1-2, pp. 387–407, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Y. Liu, J. W. Gao, and Q. Zheng, “Robust clutch slip controller design for automatic transmission,” Proceedings of the Institution of Mechanical Engineers D: Journal of Automobile Engineering, vol. 225, no. 8, pp. 989–1005, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Gao, H. Chen, Y. Hu, and K. Sanada, “Nonlinear feedforward-feedback control of clutch-to-clutch shift technique,” Vehicle System Dynamics, vol. 49, no. 12, pp. 1895–1911, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Chen and H. Yu, “Stability analysis of state saturation 2D discrete time-delay systems based on F-M model,” Mathematical Problems in Engineering, vol. 2013, Article ID 749782, 9 pages, 2013. View at Publisher · View at Google Scholar · View at MathSciNet
  17. S. Yang and J. Yu, “Stability analysis and variational integrator for real-time formation based on potential field,” Mathematical Problems in Engineering, vol. 2014, Article ID 602424, 13 pages, 2014. View at Publisher · View at Google Scholar · View at MathSciNet
  18. L. Balogh, T. Streli, H. Nemeth, and L. Palkovics, “Modelling and simulating of self-energizing brake system,” Vehicle System Dynamics, vol. 44, no. 1, pp. 368–377, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Fox, R. Roberts, C. Baier-Welt et al., “Modeling and control of a single motor electronic wedge brake,” SAE Technical Paper 2007-01-0866, 2007. View at Google Scholar
  20. J. G. Kim, M. J. Kim, and J. K. Kim, “Developing of electronic wedge brake with cross wedge,” SAE Technical Paper 2009-01-0856, 2009. View at Google Scholar
  21. J. Yao, L. Chen, F. Liu et al., “Experimental and control study of slipping decay time of a wedge clutchinan automatic transmission,” in Proceedings of the ASME Dynamic Systems and Control Conference, Fort Lauderdale, Fla, USA, October 2012.
  22. G. G. Rigatos, “Adaptive fuzzy control of DC motors using state and output feedback,” Electric Power Systems Research, vol. 79, no. 11, pp. 1579–1592, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. S. J. Cull and R. W. Tucker, “On the modelling of Coulomb friction,” Journal of Physics A: Mathematical and General, vol. 32, no. 11, pp. 2103–2113, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Obinata and B. Anderson, Model Reduction for Control System Design, Communication and Control Engineering, Springer, Berlin, Germany, 2000.
  25. J. A. Pereda, L. A. Vielva, A. Vegas, and A. Prieto, “Analyzingthe stability of the FDTD technique by combining the von neumann method with the Routh-Hurwitz criterion,” IEEE Transactions on Microwave Theory and Techniques, vol. 49, no. 2, pp. 377–381, 2001. View at Publisher · View at Google Scholar · View at Scopus