Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014 (2014), Article ID 716390, 12 pages
http://dx.doi.org/10.1155/2014/716390
Research Article

A Semianalytical Solution for Multifractured Horizontal Wells in Box-Shaped Reservoirs

1School of Energy Resources, China University of Geosciences, Beijing 100083, China
2Research Institute of Petroleum Exploration & Development, Beijing 100083, China

Received 26 January 2014; Revised 3 March 2014; Accepted 3 March 2014; Published 3 April 2014

Academic Editor: Kim Meow Liew

Copyright © 2014 Lei Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. E. Roberts, H. van Engen, and C. P. J. W. van Kruysdijk, “Productivity of multiply fractured horizontal wells in tight gas reservoirs,” in Proceedings of the Offshore Europe Conference, pp. 133–141, September 1991, SPE paper no. 23113. View at Scopus
  2. G. Guo, R. D. Evans, and M. M. Chang, “Pressure-transient behavior for a horizontal well intersecting multiple random discrete fractures,” in Proceedings of the SPE Annual Technical Conference & Exhibition, pp. 277–290, September 1994, SPE paper no. 28390. View at Scopus
  3. L. Larsen and T. M. Hegre, “Pressure transient analysis of multifractured horizontal wells,” in Proceedings of the SPE Annual Technical Conference & Exhibition, pp. 265–276, September 1994, SPE paper no. 28389. View at Scopus
  4. R. N. Horne and K. O. Temeng, “Relative productivities and pressure transient modeling of horizontal wells with multiple fractures,” in Proceedings of the 9th Middle East Oil Show & Conference, pp. 563–574, March 1995, SPE paper no. 29891. View at Scopus
  5. C. C. Chen and R. Raghavan, “A multiply-fractured horizontal well in a rectangular drainage region,” in Proceedings of the 2nd International Conference on Horizontal Well Technology, pp. 311–319, November 1996, SPE paper no. 37072. View at Scopus
  6. J. Wan and K. Aziz, “Semi-analytical well model of horizontal wells with multiple hydraulic fractures,” SPE Journal, vol. 7, no. 4, pp. 437–445, 2002. View at Google Scholar · View at Scopus
  7. M. Al-Kobaisi, E. Ozkan, and H. Kazemi, “A hybrid numerical-analytical model of finite-conductivity vertical fractures intercepted by a horizontal well,” in Proceedings of the SPE International Petroleum Conference in Mexico, pp. 599–609, November 2004, SPE paper no. 92040. View at Scopus
  8. P. P. Valkó and S. Amini, “The method of distributed volumetric sources for calculating the transient and pseudosteady-state productivity of complex well-fracture configurations,” in Proceedings of the SPE Hydraulic Fracturing Technology Conference, pp. 426–439, January 2007, SPE paper no. 106279. View at Scopus
  9. S. AI Rbeawi and D. Tiab, “Transient pressure analysis of a horizontal well with multiple inclined hydraulic fractures using type-curve matching,” in Proceedings of the SPE International Symposium and Exhibition on Formation Damage Control, pp. 1–20, 2012, SPE paper no. 149902. View at Publisher · View at Google Scholar
  10. P. Zhu, L. W. Zhang, and K. M. Liew, “Geometrically nonlinear thermomechanical analysis of moderately thick functionally graded plates using a local Petrov-Galerkin approach with moving Kriging interpolation,” Composite Structures, vol. 107, pp. 298–314, 2014. View at Google Scholar
  11. L. W. Zhang, P. Zhu, and K. M. Liew, “Thermal buckling of functionally graded plates using a local Kriging meshless method,” Composite Structures, vol. 108, pp. 472–492, 2014. View at Google Scholar
  12. L. W. Zhang, Z. X. Lei, K. M. Liew, and J. L. Yu, “Static and dynamic of carbon nanotube reinforced functionally graded cylindrical panels,” Composite Structures, vol. 111, pp. 205–212, 2014. View at Google Scholar
  13. K. M. Liew, Z. X. Lei, J. L. Yu, and L. W. Zhang, “Postbuckling of carbon nanotube-reinforced functionally graded cylindrical panels under axial compression using a meshless approach,” Computer Methods in Applied Mechanics and Engineering, vol. 268, pp. 1–17, 2014. View at Google Scholar
  14. M. F. Riley, W. E. Brigham, and R. N. Horne, “Analytic solutions for elliptical finite-conductivity fractures,” in Proceedings of the SPE Annual Technical Conference and Exhibition, pp. 35–48, October 1991, SPE paper no. 22656. View at Scopus
  15. L. Wang, X. D. Wang, J. Q. Li, and J. Wang, “Simulation of pressure transient behavior for asymmetrically fractured wells in coal reservoirs,” Transport in Porous Media, vol. 97, no. 3, pp. 352–372, 2013. View at Publisher · View at Google Scholar
  16. R.-S. Nie, Y.-F. Meng, J.-C. Guo, and Y.-L. Jia, “Modeling transient flow behavior of a horizontal well in a coal seam,” International Journal of Coal Geology, vol. 92, pp. 54–68, 2012. View at Publisher · View at Google Scholar · View at Scopus