Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014, Article ID 832192, 22 pages
http://dx.doi.org/10.1155/2014/832192
Research Article

Fault Feature Analysis of a Cracked Gear Coupled Rotor System

School of Mechanical Engineering and Automation, Northeastern University, Shenyang, Liaoning 110819, China

Received 19 March 2014; Accepted 22 May 2014; Published 24 June 2014

Academic Editor: Minping Jia

Copyright © 2014 Hui Ma et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. C. H. Yang and J. Y. Lin, “Hertzian damping, tooth friction and bending elasticity in gear impact dynamics,” Journal of Mechanisms, Transmissions, and Automation in Design, vol. 109, no. 2, pp. 189–196, 1987. View at Google Scholar · View at Scopus
  2. X. H. Tian, Dynamic simulation for system response of gearbox including localized gear faults [M.S. thesis], University of Alberta, Edmonton, Canada, 2004.
  3. S. Wu, Gearbox dynamic simulation and estimation of fault growth [M.S. thesis], University of Alberta, Edmonton, Canada, 2007.
  4. X. Zhou, Y. Shao, Y. Lei, and M. Zuo, “Time-varying meshing stiffness calculation and vibration analysis for a 16DOF dynamic model with linear crack growth in a pinion,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 134, no. 1, Article ID 011011, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. P. Sainsot, P. Velex, and O. Duverger, “Contribution of gear body to tooth deflections—a new bidimensional analytical formula,” Journal of Mechanical Design, Transactions of the ASME, vol. 126, no. 4, pp. 748–752, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Chaari, T. Fakhfakh, and M. Haddar, “Analytical modelling of spur gear tooth crack and influence on gearmesh stiffness,” European Journal of Mechanics A/Solids, vol. 28, no. 3, pp. 461–468, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. Z. Wan, Y. Zi, H. Cao, Z. He, and S. Wang, “Time-varying mesh stiffness algorithm correction and tooth crack dynamic modeling,” Journal of Mechanical Engineering, vol. 49, no. 11, pp. 153–160, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. Z. Chen and Y. Shao, “Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack,” Mechanism and Machine Theory, vol. 62, pp. 63–74, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Fernandez Del Rincon, F. Viadero, M. Iglesias, P. García, A. De-Juan, and R. Sancibrian, “A model for the study of meshing stiffness in spur gear transmissions,” Mechanism and Machine Theory, vol. 61, pp. 30–58, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Jia and I. Howard, “Comparison of localised spalling and crack damage from dynamic modelling of spur gear vibrations,” Mechanical Systems and Signal Processing, vol. 20, no. 2, pp. 332–349, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Wang and I. Howard, “Finite element analysis of High Contact Ratio spur gears in mesh,” Journal of Tribology, vol. 127, no. 3, pp. 469–483, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. J. F. Li, M. T. Xu, and S. Y. Wang, “Finite element analysis of instantaneous mesh stiffness of cylindrical gears (with and without flexible gear body),” Communications in Numerical Methods in Engineering, vol. 15, no. 8, pp. 579–587, 1999. View at Google Scholar · View at Scopus
  13. J. D. Wang, Numerical and experimental analysis of spur gears in mesh [Ph.D. thesis], Curtin University of Technology, Bentley, Australia, 2003.
  14. J. Wang and I. Howard, “The torsional stiffness of involute spur gears,” Proceedings of the Institution of Mechanical Engineers C: Journal of Mechanical Engineering Science, vol. 218, no. 1, pp. 131–142, 2004. View at Google Scholar · View at Scopus
  15. D. G. Lewicki and R. Ballarini, “Effect of rim thickness on gear crack propagation path,” Journal of Mechanical Design, Transactions of the ASME, vol. 119, no. 1, pp. 88–95, 1997. View at Google Scholar · View at Scopus
  16. Y. Pandya and A. Parey, “Failure path based modified gear mesh stiffness for spur gear pair with tooth root crack,” Engineering Failure Analysis, vol. 27, pp. 286–296, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Pandya and A. Parey, “Simulation of crack propagation in spur gear tooth for different gear parameter and its influence on mesh stiffness,” Engineering Failure Analysis, vol. 30, pp. 124–137, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Zouari, M. Maatar, T. Fakhfakh, and M. Haddar, “Following spur gear crack propagation in the tooth foot by finite element method,” Journal of Failure Analysis and Prevention, vol. 10, no. 6, pp. 531–539, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Wu, M. J. Zuo, and A. Parey, “Simulation of spur gear dynamics and estimation of fault growth,” Journal of Sound and Vibration, vol. 317, no. 3–5, pp. 608–624, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. Chen and Y. Shao, “Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth,” Engineering Failure Analysis, vol. 18, no. 8, pp. 2149–2164, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. O. D. Mohammed, M. Rantatalo, and J. Aidanpaa, “Improving mesh stiffness calculation of cracked gears for the purpose of vibration-based fault analysis,” Engineering Failure Analysis, vol. 34, pp. 235–251, 2013. View at Publisher · View at Google Scholar
  22. R. Ma and Y. Chen, “Research on the dynamic mechanism of the gear system with local crack and spalling failure,” Engineering Failure Analysis, vol. 26, pp. 12–20, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Kahraman, H. N. Ozguven, D. R. Houser, and J. J. Zakrajsek, “Dynamic analysis of geared rotors by finite elements,” Journal of Mechanical Design, Transactions of the ASME, vol. 114, no. 3, pp. 507–514, 1992. View at Google Scholar · View at Scopus
  24. J. S. Rao, T. N. Shiau, and J. R. Chang, “Theoretical analysis of lateral response due to torsional excitation of geared rotors,” Mechanism and Machine Theory, vol. 33, no. 6, pp. 761–783, 1998. View at Google Scholar · View at Scopus
  25. M. Kubur, A. Kahraman, D. M. Zini, and K. Kienzle, “Dynamic analysis of a multi-shaft helical gear transmission by finite elements: model and experiment,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 126, no. 3, pp. 398–406, 2004. View at Publisher · View at Google Scholar · View at Scopus
  26. A. S. Lee, J. W. Ha, and D.-H. Choi, “Coupled lateral and torsional vibration characteristics of a speed increasing geared rotor-bearing system,” Journal of Sound and Vibration, vol. 263, no. 4, pp. 725–742, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. A. S. Lee and J. W. Ha, “Prediction of maximum unbalance responses of a gear-coupled two-shaft rotor-bearing system,” Journal of Sound and Vibration, vol. 283, no. 3–5, pp. 507–523, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. Q. Han, J. Zhao, and F. Chu, “Dynamic analysis of a geared rotor system considering a slant crack on the shaft,” Journal of Sound and Vibration, vol. 331, no. 26, pp. 5803–5823, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Cui, Z. Liu, Y. Wang, and J. Ye, “Nonlinear dynamic of a geared rotor system with nonlinear oil film force and nonlinear mesh force,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 134, no. 4, Article ID 041001, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. P. Velex and M. Ajmi, “On the modelling of excitations in geared systems by transmission errors,” Journal of Sound and Vibration, vol. 290, no. 3–5, pp. 882–909, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. H. Ma, J. Yang, R. Z. Song et al., “Effects of tip relief on vibration responses of a geared rotor system,” Proceedings of the Institution of Mechanical Engineers C: Journal of Mechanical Engineering Science, vol. 28, pp. 1132–1154, 2014. View at Google Scholar
  32. F. K. Omar, K. A. F. Moustafa, and S. Emam, “Mathematical modeling of gearbox including defects with experimental verification,” Journal of Vibration and Control, vol. 18, no. 9, pp. 1310–1321, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Jia, I. Howard, and J. Wang, “The dynamic modeling of multiple pairs of spur gears in mesh, including friction and geometrical errors,” International Journal of Rotating Machinery, vol. 9, pp. 437–442, 2003. View at Publisher · View at Google Scholar
  34. Z. Guo and Y. D. Zhang, “Parameterization precise modeling of involutes spur gear based on APDL,” Machinery Manufacturing and Research, vol. 39, pp. 33–36, 2010. View at Google Scholar