Table of Contents Author Guidelines Submit a Manuscript
Mathematical Problems in Engineering
Volume 2014 (2014), Article ID 934176, 9 pages
http://dx.doi.org/10.1155/2014/934176
Research Article

Risk-Optimized Design of Production Systems by Use of GRAMOSA

Bremer Institut für Produktion und Logistik GmbH at (BIBA), The University of Bremen, 28359 Bremen, Germany

Received 31 January 2014; Accepted 12 February 2014; Published 20 March 2014

Academic Editor: Hamid R. Karimi

Copyright © 2014 Michael Lütjen and Abderrahim Ait Alla. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Riedel, D. Jentsch, S. Horbach, J. Ackermann, and E. Müller, “Agile planning processes,” in Advances in Production Management Systems, vol. 414 of IFIP Advances in Information and Communication Technology, pp. 143–150, 2013. View at Publisher · View at Google Scholar
  2. S. Dashkovskiy, H. R. Karimi, and M. Kosmykov, “Stability analysis of logistics networks with time-delays,” Journal of Production Planning Control, vol. 24, no. 7, pp. 567–574, 2013. View at Publisher · View at Google Scholar
  3. H.-P. Wiendahl, H. A. ElMaraghy, P. Nyhuis et al., “Changeable manufacturing—classification, design and operation,” CIRP Annals: Manufacturing Technology, vol. 56, no. 2, pp. 783–809, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Mehrsai, R. Karimi, and B. Scholz-Reiter, “Application of learning pallets for real-time scheduling by the use of radial basis function network,” Neurocomputing, vol. 101, pp. 82–93, 2013. View at Google Scholar
  5. B. Scholz-Reiter and M. Lütjen, “Modeling and evaluation of alternative production scenarios in the field of composite manufacturing,” in Proceedings of the 20th European Modeling & Simulation Symposium, R. Mosca, Ed., pp. 174–179, DIPTEM Universita di Genova, Campora S. Giovanni, Italy, 2008.
  6. M. Schenk, S. Wirth, and E. Müller, Factory Planning Manual: Situation-Driven Production Facility Planning, Springer, Berlin, Germany, 2010.
  7. M. Lauder, M. Schlereth, S. Rose, and A. Schürr, “Model-driven systems engineering: state-of-the-art and research challenges,” Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 58, no. 3, pp. 409–421, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Münster, Ein Beitrag zur Grobplanung von Lagersystemen Bei Ungewissen Planungsdaten, Technische Universität Brandenburg, 2004.
  9. A. Hassan, A. Siadat, J.-Y. Dantan, and P. Martin, “Conceptual process planning an improvement approach using QFD, FMEA, and ABC methods,” Robotics and Computer-Integrated Manufacturing, vol. 26, no. 4, pp. 392–401, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Bellgran and E. K. Säfsten, Production Development: Design and Operation of Production Systems, Springer, Berlin, Germany, 2010.
  11. S. Weig, Konzept eines integrierten risikomanagements für die ablauf- und strukturgestaltung in fabrikplanungsprojekten [Ph.D. Dissertation], TU München, 2008.
  12. R. R. Inman, D. E. Blumenfeld, N. Huang, J. Li, and J. Li, “Survey of recent advances on the interface between production system design and quality,” IIE Transactions, vol. 45, no. 6, pp. 557–574, 2013. View at Publisher · View at Google Scholar
  13. A. M. Kostin, G. Guillén-Gosálbez, F. D. Mele, M. J. Bagajewicz, and L. Jiménez, “Design and planning of infrastructures for bioethanol and sugar production under demand uncertainty,” Chemical Engineering Research and Design, vol. 90, no. 3, pp. 359–376, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Heilala, S. Vatanen, H. Tonteri et al., “Simulation-based sustainable manufacturing system design,” in Proceedings of the Winter Simulation Conference (WSC '08), pp. 1922–1930, Miami, Fla, USA, 2008.
  15. K. K. B. Hon, “Performance and evaluation of manufacturing systems,” CIRP Annals: Manufacturing Technology, vol. 54, no. 2, pp. 139–154, 2005. View at Publisher · View at Google Scholar
  16. S. Dashkovskiy, H. R. Karimi, and M. Kosmykov, “A Lyapunov-Razumikhin approach for stability analysis of logistics networks with time-delays,” International Journal of Systems Science, vol. 43, no. 5, pp. 845–853, 2012. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  17. B. Scholz-Reiter and M. Lütjen, “Production process engineering—modelling and evaluation of process chains for composite manufacturing,” in Proceedings of the International Conference on Applied Production Technology, Production of Aircraft Structures (APT '07), pp. 43–51, BIAS, Bremen, Germany, 2007.
  18. S. Bergmann and S. Strassburger, “Challenges for the automatic generation of simulation models for production systems,” in Proceedings of the Summer Simulation Multiconference (SummerSim ’10), pp. 545–549, Ottawa, Canada, July 2010.
  19. S. Horbach, “Implications of interoperability for factory planning,” in Advances in Sustainable and Competitive Manufacturing Systems, Lecture Notes in Mechanical Engineering, pp. 379–387, 2013. View at Google Scholar
  20. R. Mueller, Specification and Automatic Generation of Simulation Models with Applications in Semiconductor Manufacturing, Georgia Institute of Technology, 2007.
  21. S. Straßburger, S. Bergmann, and H. Müller-Sommer, “Modellgenerierung im kontext der digitalen fabrik—stand der technik und herausforderungen,” in Proceedings der 14 ASIM-Fachtagung Simulation in Produktion und Logistik, G. Zülch and P. Stock, Eds., pp. 37–44, KIT Scientific Publishing, Karlsruhe, Germany, 2010.
  22. L. Montrieux, Y. Yu, and M. Wermelinger, “Issues in representing domain-specific concerns in model- driven engineering,” in Proceedings of the Workshop on Modeling in Software Engineering (ICSE '13), pp. 18–19, San Francisco, CA, USA, May 2013.
  23. D. C. Schmidt, “Guest editor’s introduction: model-driven engineering,” IEEE Computer, vol. 39, no. 2, pp. 25–31, 2006. View at Google Scholar
  24. M. Lütjen, Modellierungskonzept zur integrierten planung und simulation von produktionsszenarien entwickelt am beispiel der CFK-serienfertigung [Ph.D. thesis], University of Bremen, 2014, http://nbn-resolving.de/urn:nbn:de:gbv:46-00103681-13.